NB686100-25-02418 Requirements and Specifications.pdf

Requirements / Specifications: Replacement 10W Pump for Ultrafast Laser System 1 Version 1.0 (2019) Double-click on for further assistance.

Use this document to detail specifications/requirements for an item and/or ancillary services.

TITLE: Replacement 10W Pump for Ultrafast Laser System Requesting Lab/Division/Group: Physical Measurements Lab/Applied Physics Division/Sources and Detectors Group

General Statement of Need Division 686 is involved in a series projects involving single quantum dots (artificial atoms), optically active defects, and high quality photonic resonators for non-classical light generation and photonic integrated circuits. To coherently excite and measure these systems, we use an ultrafast laser system. Current wavelength requirements are quantum dots (750-800nm and 915-990nm), defect centers (730-770 nm), and photonic resonators (780nm and 980nm). The pump laser has failed on this system and requires a replacement. This replacement needs to be installed by a qualified engineer and the system restored to its original specifications.

Items and/or Ancillary Services

Item 1: Replacement 10W Pump Quantity: 1 Specifications:

1. The lasers must be diode-pumped, solid-state or optically pumped semiconductor.

2. Output Power - > 10 Watts of continuous-wave (CW) output power at 532 nm

3. Spatial beam quality - must be TEMoo with M2 < 1.1.

4. Beam diameter - 2.25 mm ± 10%.

5. Optical noise - (measured from 10Hz to 10 MHz) < 0.03% rms.

6. Power stability - better than ±1% rms over a 24 hour period.

7. Polarization - Better than 100:1 vertical.

8. The output beam ellipticity must be less than 10%.

9. Pointing stability - < 5 microradians per degree C.

10. The optical components in the laser head must be permanently-aligned.

11. Linewidth less than 80 GHz

Separately Priced Options and Services:

Item 2: [List minimum specifications.

Quantity: [Enter quantity here.] Specifications: [Enter quantity here.]

Click or tap here to enter text.

Service Requirements / Item Specifications Section Requirements/Specifications Planning Considerations

☐ List any visits required to allow potential vendors to see site specific constraints.

[Explain requirement here]

Requirements / Specifications: Replacement 10W Pump for Ultrafast Laser System 2

☒ N/A ☐ US citizen required on-site (foreign nationals require preregistration 30 days prior) ☐ Vendor rep on-site more than three days ☐ Other considerations: [List other considerations to ensure an accurate quote]

Shipping & Delivery ☐ N/A

Standard shipping Shipping criteria:

☐ Partial delivery acceptable ☐ Direct delivery to building required

[Explain need for requirement here] Building has: ☐ Loading dock

☐ Containerization preference: [Choose container] Other requirements: [List any other requirements here]

Delivery date criteria:

☒ Delivery of goods, installation, and training shall be completed no later than:

30 Weeks ARO ☐ Deliver no earlier than: [Insert date here] ☐ Other: [List other shipping, delivery, or specil requirements]

Electronic Media ☒ N/A

[Enter electronic media requirements by item here.] ☐ Software ☐ Electronic manuals ☐ License Key ☐ Other: [List any other Electronic Media requirements here] [Enter email address for software delivery here]

Installation ☐ N/A

The new pump laser must be installed with our current Mira 900 modelocked Ti:Sapphire laser. The Mira shall be made operational with the new pump laser and returned to standard operating levels.

☐ Vendor technician on site ☐ Rigging ☐ Uncrating / Unpackaging ☐ Removal of packaging material ☒ Equipment set up ☐ Start-up services ☐ Turn key installation ☐ Other [Enter details here.] Note: When installation is required, TPOC or COR shall be the coordination point.

Facility / Utility Considerations ☒ N/A

No utility or facility requirements.

☐ OFPM Work Order Number(s)

[List any Work Order Number(s) here] ☐ Power available

Voltage: [Enter voltage here] (V) Max Current: [Enter max current draw here] (A) Phase: [Choose phase] Frequency: [Typically 60Hz] (Hz) NEMA Plug Type: [Enter plug type here] (i.e.: NEMA L5-20P) Environment: [Choose environment]

Requirements / Specifications: Replacement 10W Pump for Ultrafast Laser System 3

Other power consideration: [List any other power considerations here] ☐ Utility connections: [List relevant available utilities, pressure(s), and flowrate(s)] ☐ Other considerations: [List other considerations to ensure an accurate quote]

Warranty ☐ N/A

Base Manufacturer Warranty is acceptable [If you require an Extended Manufacturer Warranty, describe the warranty requirements per item here.] What is included?

☐ Labor ☐ Parts ☐ Travel ☐ Cost and liability for returns ☐ Other: [Enter other requirements here] ☒ Warranty length: 2 Years Period Length:2 Years

Training ☒ N/A

No training requirements ☐ On-site ☐ Off-site location: [Enter location(s) here] ☐ Number of trainees: [Enter number of trainees here] Scope of training:

☐ Operations ☐ Maintenance ☐ Troubleshooting ☐ Safety ☐ Other: [Enter other scope requirements here]

☐ Training materials to be provided: [Describe requirement here] ☐ Other: [Enter other training requirements here] Note: When training is required, TPOC or COR shall be the coordination point.

Inspection and Acceptance ☐ N/A

[Enter inspection requirements per item here] ☐ Planned government acceptance testing (7 business days) ☒ Gov’t acceptance expected to take longer than 7 business days: 14 Days ☐ Inspection and acceptance plan: [Explain here] ☐ Other: [Enter other requirements here]

Maintenance ☒ N/A none Period Length: [Ex. month, 6 month, year etc.] What is included?

☐ Labor ☐ Spare parts ☐ Consumables ☐ Travel ☐ Cost and liability for returns ☐ Software updates ☐ Manuals ☐ Service plan length: [Enter service plan length here]

☐ Other: [Enter other requirements here] ☐ Requirements: [Enter requirements here] (i.e.: onsite within 72 hours, etc.)

☐ Option Period 1 ☐ Option Period 2 ☐ Option Period 3 ☐ Option Period 4

Government none

Requirements / Specifications: Replacement 10W Pump for Ultrafast Laser System 4

Furnished Material / Equipment ☒ N/A

☐ Samples for testing ☐ Government equipment which will leave gov't site (TPOC must coordinate with division property custodian)

Serial Number: [Enter Serial Number here] Description: [Enter description here] NIST property number: [Enter NIST property number here]

☐ Other: [Enter other details here] Travel ☒ N/A none ☐ Explain: [Explain here] ☐ Other: [Enter other requirements here] Vendor: To the maximum extent possible, include as part of appropriate sections above (maintenance, repair, etc.). Otherwise, it will be a separate line item, reimbursable per the Federal Travel Regulation.

Provide suggestions to improve this form by clicking here.

https://oaam.nist.gov/OAAMAcquisitions/FormFeedback/default.aspx