23Q0127 Amendment 1.docx

N6893623Q0127

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION A - SOLICITATION/CONTRACT FORM

The required response date/time has changed from 12-Apr-2023 04:00 PM to 17-Apr-2023 04:00 PM.

SECTION C - DESCRIPTIONS AND SPECIFICATIONS

The following have been modified:

SOW

Test Equipment Calibration Statement of Work 10 Feb 2023

Contractor shall calibrate the laboratory equipment for the Weapon Component Engineering and Test Branch at Naval Air Warfare Center, Weapons Division at China Lake, CA. Specific instructions and requirements are listed below:

1. Calibrate all equipment listed in paragraph 11 below.

2. All calibration shall be in accordance with ANSI Z540-1.

3. The supplier shall be accredited to ANSI Z540-1 for all items listed.

4. All calibration shall be performed on site at the Weapon Component Engineering and Test Branch Laboratory at Naval Air Warfare Center, China Lake, CA 93555, except as noted herein.

5. Supplier shall calibrate all items on site at the Weapon Component Engineering and Test Branch Laboratory with the exception of (see paragraph 12 for complete list):

a. Weights

b. Hygrometers

c. Standard Flow Gages

6. Other items calibrated off site shall have prior written approval.

7. The calibration at China Lake Weapon Component Engineering and Test Branch Laboratory shall be performed prior to contract deadline.

8. All items calibrated off site shall be returned within five to seven days of leaving China Lake and shall be calibrated and returned prior to 10 working days after contract deadline.

9. Invoice for work performed shall be received no later than 30 days after contract deadline.

10. Documentation. The following documentation shall be provided:

a. All calibrated equipment or the storage box shall be marked with a sticker giving the following:

i. Calibration date

ii. Calibration expiration date

b. Certificate of Calibration for each of the items listed in paragraph 11.

11. Calibration List:

CDI

Torque Meter

Snap-On

Torque Wrench

Snap-On

Torque Wrench

12. Items that may be calibrated off-site:

SECTION J - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS

The below Table of Contents has been added

Exhibit/Attachment Table of Contents

(End of Summary of Changes) image1.wmf