USS_THE_SULLIVIANS_SOW.docx

USS THE SULLIVANS DDG-68

STATEMENT OF WORK

0001- CREW MESSDECK (1-220-01-L)

1. FALSE BULKHEADS: Provide labor and materials to smooth port side and aft false bulkheads for installation of wall murals. Smoothed bulkheads will have custom hinged sheathing to accommodate wall murals. Wall murals will be provided by a separate vendor after work is completed and are made of 3M Vinyl. Port false bulkhead measures approximately 51” high by 210” wide. Aft false bulkhead measures approximately 40” high by 320” wide. All materials shall be IAW MIL-STD-1623.

2. BOOTHS: Fabricate and install custom aluminum diamond plate on bench facials and sides. There are 10 total booths. Contractor must take measurements of booths prior to completing this step. All materials and fabrication shall be IAW MIL-STD-1623 and MIL-PRF-32038.

3. PARTITION: Provide labor and materials to remove existing collapsible partition and wrap beams with stainless steel. Partition runs from the deck to the overhead and is approximately 2 feet wide when collapsed. All materials shall be IAW MIL-STD-1623.

4. SALAD BAR: Provide labor and material to refurbish salad bar to include 2 tier sneeze guard with LED lighting and collapsible tray slides. Countertop of salad bar will need to be cut or replaced to accommodate collapsible tray slides. The base cabinet sections of bar and canopy shall be fully laminated with HPPL to suit décor IAW MIL-P-17171E, Type II, 20 oz. The effort is to provide a highly decorative yet functionally heavy duty for long term marine use. Ship shall approve custom design and color of laminate prior to construction. All materials and fabrication shall be IAW MIL-STD-1623 and MIL-PRF-32038.

5. BEVERAGE BAR: Provide labor and materials to extend beverage line by 5 Feet. Measurements of extended part are 5 Feet Wide x 3 Feet Deep x 37” High. Use same type stainless steel construction as current installed beverage line material. Make tray slide on current beverage line collapsible and include extended tray slide on extended portion. All materials and fabrication shall be IAW MIL-STD-1623 and MIL-PRF-32038.

6. ICE CREAM MACHINE: Provide labor and materials to install countertop ice cream machine. Countertop ice cream machine is 30” Tall x 18” Wide and 31” Deep.

7. UTENSIL HOLDER: Provide labor and materials to remove existing utensil holder and replace with cabinet for storage. Use stainless steel cabinet material. Cabinet will be 6 Feet Tall x 26” Wide x 26” Deep. All materials and fabrication shall be IAW MIL-STD-1623 and MIL-PRF-32038.

8. CONDENSING UNIT: Provide labor and materials to replace existing condensing unit under counter reach in reefer under the beverage line. Reach in reefer is outdated. Provide new motor and condensing unit to make fully operational. Reattach broken reach in reefer door with like hinges as right hand side attached reefer door.

9. BOOTH CUSHIONS: Provide labor and materials to re-upholster 20 booth cushions. Cushions are roughly 18” Wide x 52” Long. Booth cushions will be Royal Blue in color and be reupholstered with like material that is currently on them now. 10 cushions that mount on the back side of the booth will have ships crest embroidered on the cushion center. Replace cushion foam with Milspec material. All materials and fabrication shall be IAW MIL-STD-1623 and MIL-PRF-32038.

10. TABLE COVERS: Provide labor and materials to fabricate and install 19 each 54” and 3 each 72” diameter fitted table covers with ship’s crest embroidered on the top centered and ships crest with “WE STICK TOGETHER” screen printed on each drop down side of the table cover IAW MIL-STD-1623.

11. BULKHEADS: Provide labor and material to relaminate surrounding false bulkheads and doors to include display case. Approximate square footage is 150. Ship will choose laminate from samples provided by contractor before work commences. Ship shall approve custom design prior to construction. All materials and fabrication shall be IAW MIL-STD-1623 and MIL-PRF-32038.

0002- CPO MESS (1-174-0-L)

12. TABLE AND CHAIRS: Provide labor and materials to install 3 each table covers, 2 are 72” x 30” and one is 48” x 30”. Table covers should be of like material that they currently are and will have ships crest embroidered on top and centered. Screen print on drop down with ships crest and “WE STICK TOGETHER” centered IAW MIL-STD-1623.

13. CHAIR COVERS: Provide labor and materials to fabricate and install 10 each fitted chair covers in Royal Blue like material as existing chair covers. Ships crest will be embroidered on back side of chair cover centered IAW MIL-STD-1623.

14. BOOTH CUSHIONS: Provide labor and materials to re-upholster 6 booth cushions. Cushions are roughly 18” Wide x 52” Long. Booth cushions will be Royal Blue in color and be reupholstered with like material that is currently on them now. 3 cushions that mount on the back side of the booth will have ships crest embroidered on the cushion center. Replace cushion foam with Milspec material. All materials and fabrication shall be IAW MIL-STD-1623 and MIL-PRF-32038.

0003- GALLEY SERVING LINE (1-174-01-L)

15. SERVLING LINE: Provide labor and materials to install new awning on galley serving line. Awning is 28 feet long and 14 inches high. Use like material as current installed awning and color will be royal blue with screen print. Ship will provide current installed awning to contractor to replicate.

16. UTENSIL DISPLAY: Remove existing tray rack and provide labor and materials to fabricate and install utensil cabinet and display. Size of cabinet and display will be determined after removal of existing tray rack. Utensil holder will be made of stainless steel. All materials and fabrication shall be IAW MIL-STD-1623 and MIL-PRF-32038.