STATEMENT_OF_WORK_no_POC.pdf
PDF 116 KB Posted
- Attached to
- FIre Hose Federal contract opportunity
- Solicitation number
- N6668319Q0051
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SOW.pdf | ||
| Brand_Name_Justification_signed.PDF |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATEMENT OF WORK
1. Description of Services/Introduction:
Vendor to provide the following hose assemblies/fittings and testing and meet all specifications listed under “3. Specifications”:
5 each: 10’ length - series 7331 WildCatter Hose HOSE-7331-E-C-10
14 each: 20’ length - series 7331 WildCatter Hose HOSE-7331-E-C-20
20 each: 25’ length - series 7331 WildCatter Hose HOSE-7331-E-C-25
10 each: 50’ length - series 7331 WildCatter Hose HOSE-7331-E-C-50
20 each: 75’ length - series 7331 WildCatter Hose HOSE-7331-E-C-75
4 each: 100’ length - series 7331 WildCatter Hose HOSE-7331-E-C-100
2. Purpose:
All hoses are to support the Temporary Firefighting System implemented under NAVSEA technical publication - industrial ship safety manual for fire prevention and response - S0570-
AC-CCM-010/8010 and comply with TRIREFACKBAYINST 11300.2 – provision of temporary services.
3. Specifications:
All hose assemblies shall have the following characteristics:
A. 1st hose end, virgin brass, alloy UNS C92200, 4", 300psi, heavy male cam & groove adapter by hose shank. fittings shall also meet the requirements of commercial item description(cid) A-A-59326.
B. 2nd hose end, virgin brass, alloy UNS C92200, 4", 300 psi, heavy-duty female cam & groove coupler hose shank, with four locking cam arms. the locking cam arms, pins, and pull rings shall be constructed of stainless steel. the fitting shall also meet the requirements of commercial item description (cid) A-A-59326.
C. End fitting interlocking ferrules: each end fitting shall be coupled to the hose via a single ferrule crimp, sized to match the hose and fitting. the ferrule, when crimped, shall have lip that fits into the circumferential fitting groove and prevents axial ferrule movement via mechanical interference. crimp ferrules shall be UNS S30400 stainless steel, seamless.
D. each hose assembly shall be hydrostatically strength tested with commercial clean fresh water as a test medium at 300(+10,-0) psig for 10 minutes. no leakage or permanent deformation allowed. written certification of satisfactory hydrostatic testing shall be provided.
hose shall be painted at each end with 1" lettering (minimum) with the hydro pressure and date of hydro. the ferrules and at least one inch of hose at each end of the hose assembly shall be painted "fire engine” red, or similar. paint coverage of these areas shall be at least 80%.
4. Hours of Operations: N/A
5. Place of Performance: N/A
6. Travel and Other Direct Costs: N/A
7. Sole Source: N/A
8. Point of Contact:
File details come from the government source that posted it.