Draft_SOW.pdf

FOR OFFICIAL USE ONLY – Source Selection Sensitive Page 1

STATEMENT OF WORK

UCS TEMPALT Technical Data Package Development

1.0 BACKGROUND

The Sensors and SONAR Systems Department, Code 15, of the Naval Undersea Warfare

Center (NUWC) Division Newport is responsible for a full spectrum of engineering and research efforts pertaining to Sensors, SONAR, Undersea Warfare and Autonomous Vehicles.

Code 15 is involved in every aspect and every phase of the engineering life cycle as it applies to sensors and SONAR systems.

2.0 SCOPE

The Contractor shall generate a Temporary Alteration (TEMPALT) Technical Data Package

(TDP) that allows installation of the Underwater Communications System (UCS) onto Legacy

SSBN or SSBN‐MOD platforms.

2.1 APPLICABLE SYSTEMS

2.1.1 Acoustic and Non‐Acoustic Sensors, Arrays and Transducers

2.2 APPLICABLE SPONSORS

2.2.1 Strategic Systems Programs (SSP)

2.3 APPLICABLE NUWCDIVNPT DEPARTMENTS

This contract is applicable to the Sensors and SONAR Department, Code 15, of the Naval

Undersea Warfare Center Division Newport, RI.

2.4 FUNDING TYPES

Types of funding to be used under this contract include OPN.

3.0 APPLICABLE DOD/MIL STANDARD SPECIFICATION DOCUMENTS

The latest version of the following government documents are provided as directives for performing the work required under this statement of work.

FOR OFFICIAL USE ONLY – Source Selection Sensitive Page 2

Index Document Name Applicable SOW

Tasks

3.1 NAVSEA S9070‐AA‐MME‐010/SSN/SSBN, Third

Revision, Advance Change Notice 4

4.1.1 – 4.1.5

3.2 NAVSEA Instruction 4720.14 Series, Temporary

Alterations to Active Fleet Submarines

4.1.1 – 4.1.5

4.0 REQUIREMENTS

The Contractor is to generate the Temporary Alteration (TEMPALT) Technical Data Package

(TDP) that instructs the installation of the Underwater Communications System (UCS) onto

Legacy SSBN and SSBN‐MOD platforms.

In accordance with the Applicable Documents in Section 3.0 and using Government

Furnished Information (GFI) in Section 5.0, the Contractor shall provide the following services:

4.1 COMPLETION OF UCS TEMPALT TDP

4.1.1 The contractor shall perform ship checks on SSBN Legacy and SSBN Mod platforms.

The contractor shall incorporate the mechanical analyses data obtained from the ship checks into the TEMPALT.

4.1.2 The contractor shall generate the draft UCS TEMPALT TDP. The Contractor shall adjudicate comments provided by NUWCDIVNPT by updating the UCS TEMPALT TDP accordingly, based on GFI items 5.1, 5.2 and 5.3. The Contractor shall deliver the draft UCS

TEMPALT TDP in accordance with CDRL A001.

4.1.3 NUWCDIVNPT will generate the forwarding letter for the TEMPALT submission to

PMS392, and the contractor shall submit the UCS TEMPALT TDP to both NUWCDIVNPT and

PMS 392 in accordance with CDRL A001. PMS 392 is the approving government official for

SSBN TEMPALTs.

4.1.4 The Contractor shall adjudicate and respond to PMS 392 comments by updating the

FOR OFFICIAL USE ONLY – Source Selection Sensitive Page 3

UCS TEMPALT TDP accordingly, and resubmitting the UCS TEMPALT TDP in accordance with

CDRL A001

4.1.5 The Contractor shall submit a Final (approved) UCS TEMPALT TDP for acceptance by the Government in accordance with CDRL A002.

5.0 GOVERNMENT FURNISHED INFORMATION (GFI)

Number Title Task Number(s)

5.1 NAVSEA Approvals Package 4.1.1

5.2 Drawings and Supporting Documents

Package 4.1.1

5.3 NAVSEA and Planning Yard Comments via

Supervisor of Shipbuilding Package 4.1.1, 4.1.4, as required