FBO_20170203_ITEM_1_HW_SYSTEMS_CONFIGURATION.pdf

System

Components Qty

Minimum Specifications/Salient Features

Brand Name Only P/N

Brand Name or Equal P/N

Hyper Node

1 Rack mount HPC Hyper Node System with the following configuration:

Chassis 1 Rack mount Rail kit for standard 24 inch Rack;

Disk Space: 24 x 2.5 inch hard-drive bays wired and connected to support, at a minimum, RAID 0, 1, 5 & 6 operations on all bays;

Power Supply: 1620 Watt (or larger) high-efficiency dual redundant (2+2) 80+ Platinum power supplies

N/A N/A

Motherboard 1 The motherboard must be capable of supporting CPUs of the following specifications: at least Quad Intel Xeon EX E7-8800 v3/ 4800 V3 family (at least Quad Socket R1 LGA 2011) Up to 30 Cores and 155 Watts per

CPU;

The System Bus: QPI up to 9.6 GT/s;

Memory Capacity: Must have support for at least six (6) Terabytes (TB) of DDR4 DIMM memory (all memory cards populated to meet system requirements);

SATA: SATA2 (3Gbps) w/RAID 0, 1, 5, 10 and SATA3 (6Gbps) w/RAID 0, 1;

Network: Available Dual 10GBase-T ports supporting 10GBase-T, 1000Base-T, 100Base-TX and 10Base- T via RJ-45 output, at a minimum.;

USB: 4 USB 2.0 ports;

Onboard Video: PCIe VGA/2D Controller 1920x1200@60Hz;

PCI-E: At least Four (4) PCI-E 3.0 x 16 slots and at least Seven (7) PCI-E 3.0 x 8 slots;

Sufficient fans/cooling to support a fully populated system (memory, disks, PCI slots);

TPM: FIPS TPM 2.0 Module

N/A N/A

CPUs 4 Intel Xeon E7-8890v3 2.5GHz Eighteen-Core Processors

Intel Xeon Processor E7-8890 v3 (45M Cache, 2.5GHz)

NO

Memory 96 A minimum of 6TB of total memory composed of 64GB 240-pin DDR4 2133MHz (8Rx4) 1.5V ECC Memory or equivalent

N/A N/A

Storage 1 RAID Controller for 24 SAS/SATA drives 6Gb/s PCIe 2.0 with Battery Backup Unit or Flash caching

N/A N/A

Storage 22 Crucial MX300 1 TB SATA III 2.5 inch Solid State Drive (SSD) configured as RAID6, to fulfill the following system requirements:

Data Transfer Rate 600 Megabytes per Second; Hardware Interface SATA

6.0 Gbs (SATA3);

Sequential Read Speed 555 or better;

Sequential Write Speed 500 or better;

Random read 100K IOPS or better;

Random write 87K IOPS or better Part# CT1050MX300SSD1

Part#

CT1050MX300SSD1

NO

Storage 2 Crucial MX300 500 GB SATA III 2.5 inch Solid State Mirrored Boot Drive, to fulfill the following system requirements:

Data Transfer Rate 600 Megabytes per Second; Hardware Interface SATA

6.0 Gbs (SATA3);

Sequential Read Speed 555 or better;

Sequential Write Speed 500 or better;

Random read 100K IOPS or better;

Random write 87K IOPS or better Part#: CT525MX300SSD1

Part#:

CT525MX300SSD1

NO

Ethernet Card 1 ConnectX-3 Pro EN Network Interface Card, 40/56GbE Dual-Port QSFP, PCIe 3.0x8 8.0GT/s, tall Bracket, RoHS R6

NO

MCX314A-

BCBT

Cables 2 Mellanox 40 GBE QSFP Passive Copper Cable 3 meter, 40/56GbE Copper Cable

NO

MC2210130-

O/S Software 2 Red Hat Enterprise Linux 6 (RHEL6) Server, Standard installed on systems with 3 years of support

Red Hat Enterprise Linux Server, 6, Standard (Physical or Virtual Nodes)

NO

OS File System 2 Red Hat Scalable File System Add-On, Standard installed on systems with 3 years of support

Red Hat Scalable File System Add-

On, Standard

System Footprint: All Items must fit within 14 U of 19-inch Rack Space

Components Qty

Minimum Specifications/Salient Features

Brand Name Only P/N

Brand Name or

Equal P/N

Storage Node

1 Rack mount storage system configured as follows:

inch Rack.

Must support: 24 front and 12 rear 3.5-inch hot-swap drive bays cabled with carriers plus two 2.5- inch rear Drive bays, all 12Gb SAS Backplane

N/A N/A

Motherboard 1 The motherboard must be capable of supporting CPUs of the following specifications: Dual Socket R3 (LGA 2011) Intel Xeon processor E5-2600 v4 family;

System Bus: QPI up to 9.6GT/s;

Memory Capacity: Minimum of 16 x 240-pin DDR4 DIMM sockets, supporting up to 1TB of system memory;

Chipset: Intel C612 chipset;

SATA: 10 x SATA 3.0 6Gbps with RAID 0, 1, 5, 10;

Network: Dual Gigabit Ethernet LAN Ports;

USB: 5 x USB 3.0 support Minimum of 5, (2 via header, 2 rear, 1 Type A); 6 x USB 2.0 (2 rear, 4 via header);

Onboard Video: VGA video;

PCI-E: At least three PCI-E 3.0 x 16 slots, Low-profile, and at least three PCI-E 3.0 x 8 slots, Low-profile.

TPM: FIPS TPM 2.0 Module

N/A N/A

Power Supply 2 Minimum of 1280 Watt High-Efficiency Redundant power supplies (1+1)

N/A N/A

CPUs 2 Intel Xeon E5-2643 v4 3.4GHz 6 cores processor

Intel Xeon Processor E5-2643 v4 (20 M Cache

3.4GHz)

NO

Memory 8 8GB DDR4 2133MHz DIMM N/A N/A

Storage, SSD Drives

2 Crucial MX300 1 TB SATA III 2.5 inch Solid State Drive (SSD) for mirrored system disks, to fulfill the following system requirements:

Data Transfer Rate 600 Megabytes per Second; Hardware Interface SATA 6.0 Gbs (SATA3);

Sequential Read Speed 555 or better;

Sequential Write Speed 500 or better;

Random read 100K IOPS or better;

Random write 87K IOPS or better;

Part #: CT1050MX300SSD1 (Note: preferable location - rear-facing)

Part #:

CT1050MX300SSD1

NO

Storage, Rotational Disk Drives

24 8TB SAS 7200 RPM 12Gig SAS 3.5 inch Disk Drives N/A N/A

RAID Controller 1 8-Port 12Gb/s SATA/SAS PCIe 3.0 x 8 Sixteen Internal Ports supporting at least hardware RAID 0, 1, 5, 6, 10, 50, 60 for up to 36 drives with Battery Backup Unit or flash caching

N/A N/A

Ethernet Card 1 ConnectX-3 Pro EN Network Interface Card, 40/56GbE Dual-Port QSFP, PCIe 3.0x8 8.0GT/s, tall Bracket, RoHS R6

NO

MCX314A-

BCBT

Rotational Disk Drives

6 Additional 8TB SAS 7200 RPM 12 Gig SAS 3.5 inch disk drives, to fill 6 of the 12 rear bank of available drive bays

N/A N/A

Cables 2 40 Gbe QSFP Passive Copper Cable, 3 Meter N/A N/A

OS Software 2 Red Hat Enterprise Linux 6 (RHEL6) Server, Standard installed on systems with 3 years of support

Red Hat Enterprise Linux Server, 6, Standard (Physical or Virtual Nodes)

NO

OS File System 2 Red Hat Scalable File System Add-On, Standard installed on systems with 3 years of support

Red Hat Scalable File System Add-

On, Standard

Components Qty

Minimum Specifications/Salient Features

Brand Name Only P/N

Brand Name or Equal P/N

Compute Node

1 Rackmount Compute Nodes configured as follows:

inch Rack; Tool-less Rail 2U-4U;

Disk Space: 8 x 3.5 inch hotswap SATA drive bays; 2 x rear hot-swap 2.5 SATA drive bays; and 2x internal 2.5 SATA drive bays Power Supply: 650Watt (or larger) high-efficiency redundant (1+1) power supply One internal drive bay for DVD-RW driv with DVD-RW included; slim optical slot; and 4x or 8x hotswap

N/A N/A

Motherboard 1 "The motherboard must be capable of supporting CPUs of the following specifications:

at least two Intel Xeon E5-2600 V3 family Up to 16 Cores and 135 Watts per CPU;

The System Bus: QPI up to 9.6 GT's Memory Capacity: Must have support for at least 256 Gigabytes (GB) of DDR4 DIMM memory (all memory cards populated to meet system requirements);

SATA: SATA2 (3Gbps) w/RAID 0, 1, 5, 10 and SATA3 (6Gbps) w/RAID 0, 1;

Network: Available Dual 10GBase-T ports supporting 10GBase-T, 1000Base-T, 100Base-TX and 10Base- T via RJ-45 output, at a minimum.;

USB: 4 USB 3.0 ports;

Onboard Video: PCIe VGA/2D Controller 1920x1200@60Hz;

PCI-E: At least two (2) PCI-E 3.0 x 16 slots;

2U Active Cooler for Intel Xeon socket 2011/R (38)" TPM: FIPS TPM 2.0 Module

N/A N/A

CPUs 2 Intel Xeon E5-2667 v4 3.2GHz eight-core processor

Intel Xeon Processor E5-2667 v4 (20M Cache, 3.2GHz)

NO

Memory 16 Total of 256GB system memory from 16GB DDR4 2400MHz Sticks N/A N/A

Power Supply 1 1+1 Redundant 650W High Efficiency Power Supply N/A N/A

RAID Controller 1 1x 8-Port 12Gb/s SAS PCI-E 3.0 Dual Core RAID Controller - Low Profile; 1x RAID Controller Cache Backup Module

N/A N/A

Storage 4 Crucial MX300 1 TB SATA III 2.5 inch Solid State Drive (SSD) Part #: CT1050MX300SSD1

Part #:

CT1050MX300SSD1

NO

Storage 2 Crucial MX300 275GB SATA III 2.5 inch Solid State Drive (SSD) Part #: CT275MX300SSD1

Part #:

CT275MX300SSD1

NO

Ethernet Card 1 Dual port 40Gb QSFP+ Ethernet PCIe

3.0 x8 NO

MCX314A-

BCBT

Optical 1 DVD-RW N/A N/A

Cables 2 1x 1.5ft Power Cable (C13 / C14) - Black (3) with a NEMA 5-15 male plug N/A N/A

O/S Software 2 Red Hat Enterprise Linux 6 (RHEL6) Server, Standard installed on systems with 3 years of support

Red Hat Enterprise Linux Server, 6, Standard (Physical or Virtual Nodes)

Components Qty Minimum Specifications/Salient Features

Brand Name Only P/N

Brand Name or Equal P/N

Network Devices

1 40/10GB Ethernet Switch

40/10GB

Ethernet Switch

1 HPC Cluster connectivity requires a high density, low latency Ethernet switching. A NIAP or DISA APLITS approved 40G Ethernet QSFP/SFP+ switch for use as a high performance cluster computing top of the rack will fulfill this requirement.

The unit must have a minimum of 24 ports of QSFP 40GbE and at least an additional 20 SFP+ 10GbE ports. The 20 10GbE ports can either be 5 in 4 x 10G fan-out groups or 20 40GbE to 10GbE adapters and 10G SFP+ cables.

The unit will have redundant power supplies and fit in a 1U rack mount space and the switch will include the rail mounting kit.

NO

Dell Networking

S6000 10/40GbE switch

Components Qty Minimum Specifications/Salient Features

Brand Name Only

P/N

Brand Name or Equal P/N

Network Accessories

Ethernet Card 15 40Gb QSFP PCIe 3.0 x8, a minimum of one port, two is preferable

NO

MCX314A-

BCBT

Cables 15 40 Gbe QSFP Passive Copper Cable, 3 Meter NO

SF-

SFPP2EPAS

S-003

Cable w/Adapters see Options 1 and 2 below:

Option 1:

Adapter/Cable

Cables 20 Amphenol 10GbE SFP+ Direct Attach Copper Cable (9.8 ft) 3m SFP+ Cable. NO

SF-

SFPP2EPAS

S-003

Option 1:

Adapter/Cable

- continued

Cable Adapters 20 Mellanox QSFP to SFP+ Cable Adapters

NO

MAM1Q00A

-QSA

(OR Option 2.)

Breakout cable

Breakout Cable 5 Amphenol QSFP to 4 SFP+ breakout Cable (30 AWG Passive Copper) - 1 x QSFP+ (40G) to 4 x SFP+ (10G) Connectors 3m (9.8 ft) Option 2 is preferred – space saving device and lower cost

NO

MC2609130-

1U Tray Console

1 Keyboard, mouse, monitor in a 19 inch rack mountable 1U pull out tray

NO NO

Smart Card Reader

2 USB Smart Card Reader

NO NO

Maintenance and Warranty Requirements:

All software applications must include three (3) years of maintenance support from time of delivery.

All hardware must include a three (3) year warranty from the original equipment manufacturer from time of delivery and include the following:

phone support;

next business day parts; and failed disk replacement program allowing the Government to retain the failed drive for destruction and only provide a photocopy of the label for proof of failure.

No on-site support representative is required.