Configuration_Specifications_Rev_6_RFQ.pdf

Government System Configuration Specifications

Attachment to Brand Name Specification

PR 1300541672

System

Components Qty Minimum Specifications/Salient Features

Brand Name

Only P/N

Brand Name or Equal P/N

Hyper

Node

CLIN 0001 1

Rack mount HPC Hyper Node System configured as follows:

Chassis 1 --Rack mount Rail kit for standard 24 inch Rack

N/A N/A

--Disk Space: 24 x 2.5 inch Hard drive bays wired and connected to support, at a minimum, RAID 0, 1, 5 & 6 operations on all bays

--Power Supply: 1620 Watt (or larger) high-efficiency dual redundant (2+2) 80+ Platinum power supplies

Motherboard 1

--The motherboard must be capable of supporting

CPUs of the following specifications: at least Quad

Intel Xeon EX E7-8800 v3/ 4800 V3 family (at least

Quad Socket R1 LGA 2011) Up to 30 Cores and 155

Watts per CPU

--System Bus: QPI up to 8 GT/s

--Memory Capacity: Must have support for at least six (6) Terabytes (TB) of DDR4 DIMM memory (all memory cards populated to meet system requirements)

--SATA: SATA2 (3Gbps) w/RAID 0, 1, 5, 10 and

SATA3 (6Gbps) w/RAID 0, 1

--Network: Available Dual 10GBase-T ports supporting 10GBase-T, 1000Base-T, 100Base-TX and

10Base-T via RJ-45 output, at a minimum.

--USB: 4 USB 2.0 ports

--Onboard Video: PCIe VGA/2D Controller

1920x1200@60Hz

--PCI-E: At least Four (4) PCI-E 3.0 x 16 slots and at least Seven (7) PCI-E 3.0 x 8 slots

--Sufficient fans/cooling to support a fully populated system (memory, disks, PCI slots)

CPUs 4 Intel Xeon E7-8890v3 2.5GHz Eighteen-Core

Processors

Intel Xeon

Processor E7-

8890 v3

(45M Cache,

2.50 GHz)

NO

Memory 96

A minimum of 6TB of total memory composed of

64GB 240-pin DDR4 2133MHz (8Rx4) 1.5V ECC

Memory or equivalent

N/A N/A

Storage 1 RAID Controller for 24 SAS/SATA drives 6Gb/s

PCIe 2.0 with Battery Backup Unit or Flash caching N/A N/A

Storage 22

Crucial MX200 1 TB SATA III 2.5 inch Solid State

Drive (SSD) configured as RAID6, to fulfill the following system requirements:

Data Transfer Rate 600 Megabytes Per Second

Hardware Interface SATA 6.0 Gbs (SATA3)

Sequential Read Speed 555 or better

Sequential Write Speed 500 or better

Random read 100K IOPS or better

Random write 87K IOPS or better

CT1000MX2

00SSD1

NO

Storage 2

Crucial MX200 500 GB SATA III 2.5 inch Solid

State Mirrored Boot Drive, to fulfill the following system requirements:

Data Transfer Rate 600 Megabytes Per Second

Hardware Interface SATA 6.0 Gbs (SATA3)

Sequential Read Speed 555 or better

Sequential Write Speed 500 or better

Random read 100K IOPS or better

Random write 87K IOPS or better

CT500MX20

0SSD1

NO

Storage 2

FusionIO SX300-6400 6.4 TB PCI-E High speed

Solid State Drive (SSD) cards for application scratch space for computational models exceeding 6TB

SDFACCMO

S-6T40-SF1

Ethernet

Card

ConnectX-3 Pro EN Network Interface Card, 40/56GbE Dual-Port QSFP, PCIe 3.0x8 8.0GT/s, tall

Bracket, RoHS R6

NO

MCX314A-

BCBT

Cables 2 Mellanox 40 GBE QSFP Passive Copper Cable 1 meter, 40/56GbE Copper Cable

NO

MC2210130-

OS

Software

Red Hat Enterprise Linux 6 (RHEL6) Server, Standard installed on systems with 3 years of support

Red Hat

Enterprise

Linux Server, 6, Standard

(Physical or

Virtual

Nodes)

OS

File System

Red Hat Scalable File System Add-On, Standard installed on systems with 3 years of support

Red Hat

Scalable File

System Add-

On, Standard

System Footprint: All Items must fit within 14 U of 19-inch Rack Space

Components Qty Minimum Specifications/Salient Features

Brand Name

Only P/N

Brand Name or Equal P/N

Storage

Node CLIN 0002 1 Rack mount storage system configured as follows:

Chassis 1

--Rack mount Rail kit for standard 24 inch Rack.

--Must support: 24 front and 12 rear 3.5-inch hot-swap drive bays cabled with carriers plus two 2.5-inch rear Drive bays, all 12Gb SAS Backplane

N/A N/A

Motherboard 1

--The motherboard must be capable of supporting

CPUs of the following specifications: Dual Socket R3

(LGA 2011) Intel Xeon processor E5-2600 v3 family

--System Bus: QPI up to 9.6GT/s

--Memory Capacity: Minimum of 16 x 240-pin

DDR4 DIMM sockets, supporting up to 1TB of system memory

--Chipset: Intel C612 chipset

--SATA: 10 x SATA 3.0 6Gbps with RAID 0, 1, 5, 10

--Network: Dual Gigabit Ethernet LAN Ports

--USB: 5 x USB 3.0 support Minimum of 5, (2 via header, 2 rear, 1 Type A); 6 x USB 2.0 (2 rear, 4 via header)

--Onboard Video: VGA video

--PCI-E: At least three PCI-E 3.0 x 16 slots (Low-profile) and at least three PCI-E 3.0 x 8 slots (Low-profile)

Power Supply 2 Minimum of 1280 Watt High-Efficiency Redundant power supplies (1+1) N/A N/A

CPUs 2 Intel Xeon E5-2643 v3 3.4GHz 6 cores processor

Intel Xeon

Processor E5-

2643 v3

(20M Cache,

3.40 GHz)

Memory 8 8GB DDR4 2133MHz DIMM N/A N/A

Storage, SSD Drives

Crucial MX200 1 TB SATA III 2.5 inch Solid State

Drive (SSD) for mirrored system disks , to fulfill the following system requirements:

Data Transfer Rate 600 Megabytes Per Second

Hardware Interface SATA 6.0 Gbs (SATA3)

Sequential Read Speed 555 or better

Sequential Write Speed 500 or better

Random read 100K IOPS or better

Random write 87K IOPS or better

CT1000MX2

Storage, Rotational

Disk Drives

26 8TB SAS 7200 RPM 12Gig SAS 3.5 inch Disk Drives N/A N/A

RAID

Controller

8-Port 12Gb/s SATA/SAS PCIe 3.0 x 8 Sixteen

Internal Ports supporting at least hardware RAID 0, 1, 5, 6, 10, 50, 60 for up to 36 drives with Battery

Backup Unit or flash caching

N/A N/A

Ethernet Card 1

ConnectX-3 Pro EN Network Interface Card, 40/56GbE Dual-Port QSFP, PCIe 3.0x8 8.0GT/s, tall

Bracket, RoHS R6

NO

MCX314A-

BCBT

Rotational

Disk Drives

Additional 8TB SAS 7200 RPM 12 Gig SAS 3.5 inch disk drives, to fill 4 of the 12 rear bank of available drive bays

N/A N/A

Cables 2 40 GE QSFP Passive Copper Cable, 1 Meter N/A N/A

OS Software 1 Red Hat Enterprise Linux 6 (RHEL6) Server, Standard installed on systems with 3 years of support

Red Hat

Enterprise

Linux Server, 6, Standard

(Physical or

Virtual

Nodes)

OS File

Red Hat Scalable File System Add-On, Standard installed on systems with 3 years of support

Red Hat

Scalable File

System Add-

On, Standard

System Footprint : All Items must fit within 14 U of 19-inch Rack Space

Components Qty Minimum Specifications/Salient Features

Brand Name

Only P/N

Brand Name or Equal P/N

Analysis

Workstation CLIN 0003 1 Floor standing tower system configured as follows:

Chassis 1

--Eight 3.5 inch hot-swap SATA3 HDD bays;

--Eight 2.5 inch hot-swap SAS3 drive bays;

--One 5.25 inch Drive Bay

N/A N/A

Motherboard 1

-- The motherboard must be capable of supporting

CPUs of the following specifications: Dual Socket

R3 (LGA 2011) Intel Xeon processor E5-2600 v3 family

--System Bus: QPI up to 9.6GT/s

--Memory Capacity: Support for up to 1.5TB of

ECC DDR4 2133MHz system memory modules in

24 x 240-pin DDR4 DIMM sockets.

--Chipset: Intel C602 chipset

--SATA: SATA 3.0 (6Gbps) with RAID 0, 1, 5, 10

Integrated RAID Controller: LSI 3108 SAS3

(12Gbps) controller (or equivalent) supporting H/W

RAID levels 0, 1, 5, 6, 10, 50, 60

--Network: Quad LAN supporting 10GBase-T

--USB: USB support: a minimum of two USB 3.0 and four USB 2.0.

--Onboard Video: 1 VGA video

--PCI-E: At least two PCI-E 3.0 x 16; three PCI-E

3.0 x 8 slots; and at least one PCI-E 2.0 x 4 (in x 8) slot

Power Supply 1 Minimum of one 1000 Watt High-Efficiency

Redundant Power Supply (1+1) N/A N/A

CPUs 2 Intel Xeon E5-2667 v3 3.2GHz eight-core processor

Intel Xeon

Processor E5-

2667 v3

(20M Cache,

3.20 GHz)

NO

Memory 16 Total of 256GB system memory from 16GB DDR4

2133MHz Sticks

SSD Boot

Drive

Crucial MX200 1 TB SATA III 2.5 inch Solid State

Drive system disk, to fulfill the following system requirements:

Data Transfer Rate 600 Megabytes Per Second

Hardware Interface SATA 6.0 Gbs (SATA3)

Sequential Read Speed 555 or better

Sequential Write Speed 500 or better

Random read 100K IOPS or better

Random write 87K IOPS or better

CT1000MX2

SSD Data

Drives

Crucial MX200 1 TB SATA III 2.5 inch Solid State

Drive (SSD) in a RAID 5 configuration, to fulfill the following system requirements:

Data Transfer Rate 600 Megabytes Per Second

Hardware Interface SATA 6.0 Gbs (SATA3)

Sequential Read Speed 555 or better

Sequential Write Speed 500 or better

Random read 100K IOPS or better

Random write 87K IOPS or better

CT1000MX2

00SSD1

NO

Graphics 1 nVIDIA K6000 super high resolution graphics card, to fulfill the following requirements:

GPU Memory 12GB GDDR5

Memory Bandwidth 288GB/s

Display Connectors DVI-I DL + DVI-D DL + DP

1.2 + DP 1.2

Number of Displays Supported 4

Maximum DP 1.2 Resolution 4096x2160 at 60Hz

(direct connect)

Maximum DVI-I DL Resolution 2560x1600 at

60Hz

Maximum DVI-I SL Resolution 1920x1200 at

60Hz

VCQK6000-

PB

User

Interface

DELL Ultrasharp 32 inch Monitors, to fulfill the following requirements:

32 Inch 4K widescreen monitor

Input connectors: DP (DP – DisplayPort), mDP, HDMI (MHL).

3840 x 2160 @ 60Hz (Optimal resolution)

Antiglare screen

NO UP3216Q

Optical Disk 1 16x SATA Blue-Ray Internal Writer N/A N/A

Operating

System

1 Microsoft Windows 10 Pro with 3 years of support Windows 10

Pro

Optical Disk 1 Roxio Creator NXT 4 with 3 years of support

Creator NXT

Pro 4 - PHY

Components Qty. Minimum Specifications/Salient Features

Brand Name

Only P/N

Brand Name or Equal P/N

Network

Devices

CLIN 0004

40/10GB

Ethernet

Switch

--HPC Cluster connectivity requires high density, low latency Ethernet Switching

--A NIAP or DISA APLITS approved 40Gig

Ethernet QSFP/SFP+ switch for use as a High-

Performance Cluster Computing top of the rack switch will fulfill this requirement

--The unit must have a minimum of 24 ports of

QSFP 40 GbE and at least an additional 10

SFP+ 10GbE ports

--The unit will have redundant power supplies and fit in a 1U rack mount space and the switch will include the rail mounting kit

NO

Dell

Networking

S6000

10/40GbE switch

System Footprint: All Items must fit within 14 U of 19-inch Rack Space

Components Qty. Minimum Specifications/Salient Features

Brand Name

Only P/N

Brand Name or Equal P/N

Network

Accessories/

Peripherals

CLIN 0005 Cables 6 Amphenol 10GbE SFP+ Direct Attach Copper

Cable (9.8 ft) 3m SFP+ Cable.

NO

SF-

SFPP2EPAS

S-003

CLIN 0006

Cable

Adapters 19 Mellanox QSFP to SFP+ Cable Adapters NO

MAM1Q00A

-QSA

CLIN 0007

1U Tray

Console

Keyboard, mouse, monitor in a 19 inch rack mountable 1U pull out tray

Maintenance and Warranty Requirements:

All software applications must include three (3) years of maintenance support from time of delivery.

All hardware must include a three (3) year warranty from the original equipment manufacturer from time of delivery and include the following:

24x7 phone support;

next business day parts; and failed disk replacement program allowing the Government to retain the failed drive for destruction and only provide a photocopy of the label for proof of failure.

No on-site support representative is required.