Amendment 0002.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this amendment is to update Section C and extend the solicitation date. All other terms and conditions remain the same.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 4

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 21-Sep-2023

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street , County, State and Zip Code) X N6426723Q0222

X 9B. DATED (SEE ITEM 11)

03-Aug-2023

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

21-Sep-2023

CODE

NAVAL SURFACE WARFARE CENTER, CORONA DIV

1999 FOURTH STREET

BLDG 204

NORCO CA 92860

N64267 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

N6426723Q0222

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION A - SOLICITATION/CONTRACT FORM

The required response date/time has changed from 21-Aug-2023 12:00 PM to 22-Sep-2023 10:00 AM.

SECTION C - DESCRIPTIONS AND SPECIFICATIONS

The following have been modified:

PURCHASE DESCRIPTION

SALES TAX EXEMPTION

The contractor is hereby advised that the United States Government and Agencies thereof are exempt from State and Local Government tax by virtue of Article 6 of the United States Constitution. No exemption certificate is required.

1. INTRODUCTION

Naval Surface Warfare Center Corona Division, is requesting ITEG ECU System to support the integration of operating platforms.

2. BACKGROUND

This equipment will be utilized to support NSWC Corona’s platforms and their equipment.

3. REQUIREMENTS

***Offerors shall be an OEM, authorized dealer, authorized distributor or authorized reseller for the proposed supplies, equipment and/or services. Offerors shall provide proof of authorization verified by an authorization letter or other documents from the OEM.***

CLIN DESCRIPTION QTY

1 Advanced Cooling Technologies (ACT) Non Recurring Engineering

(NRE)

2 Advanced Cooling Technologies (ACT) H60-T163 400Hz 5-Ton Skid Mounted Environmental Control Unit (ECU)

3 each

3 Advanced Cooling Technologies (ACT) 019T219-1 Ducts 6 each 4 Miscellaneous Repair/Maintenance parts for Advanced Cooling

Technologies (ACT) ECU 3 sets

The contractor shall provide listed equipment identified in the CLINs above.

Shipping shall be included in the total cost; proposals for bid shall include manufacturer, model, part number and specifications proposed.

Specification:

The characteristics are for each system shall include the ECU, and any lubricants, filters, and manufacturer recommended repair/maintenance parts for each system. The ECU shall be the Advanced Cooling Technologies (ACT) H60-T163 400HZ 5-Ton Skid Mounted ECU. The specifications are as follows:

CLIN 001 – Advanced Cooling Technologies (ACT) Non Recurring Engineering (NRE)

Using of the shelf components, and existing technologies, make the ECU Accept power from the diesel generator:

220-240 VAC, 3 phase, 400Hz.

CLIN 002 – Advanced Cooling Technologies (ACT) 400Hz 5-Ton Environmental Control Unit (ECU) The Environmental Control Unit (ECU) shall:

Accept power from the diesel generator: 220-240 VAC, 3 phase, 400Hz Provide minimum 60,000 BTU/hr of cooling at temperatures up to 125° F (minimum) or 130° F (desired) Provide minimum flow rate of 1800 CFM Capable of operating up to 60° C/140° F ambient temperatures.

Ducting ports on ECU shall be in the left side of unit Ruggedized to road vibrations and shock allowing use in an off-road environment Shall be Stainless Steel Skid Mounted Shall be sand and dust resistant.

Shall be in a weatherproof, sand and dust resistant, enclosure, NEMA 3X or greater Finish shall be Primer in accordance with MIL-P-85582, Type I, Class C, Apply 2 coats of paint on primed surface in accordance with MIL-PRF-85285, Type II, Color 23690 (tan) in accordance with FED-STD-595.

OEM Schematics/Drawings, specification sheets, maintenance manuals and any other O&M documentation shall be provided upon delivery (hard and soft copy) Contractor shall provide recommended list of spares Optional: Provide minimum Heating capacity: 18 Kw

CLIN 003 - Advanced Cooling Technologies (ACT) 019T219-1 Ducts

Contain collapsible ducting suitable for storage and transport Ducting material shall be flexible, fire retardant, and insulated Supply and Return ducting length shall be minimum 15 feet Ducting diameter shall be 16 inches Ducting connections shall be 16 inch with cover

CLIN 004 - Miscellaneous Repair/Maintenance parts for Advanced Cooling Technologies (ACT) ECU

The contractor shall provide basic repair and maintenance parts in a “set” consisting of any necessary fluids, hoses, fuses, gaskets, brackets and other small items necessary for system functioning.

Items provided shall be basic in nature and capable of being installed by range personnel without voiding manufacturer warranty

Vendor shall provide Start Up and Training On site commissioning, inspection, field testing and training services by a factory technician skilled in the operation and theory of power conversion equipment.

Training owner’s personnel in the operation, maintenance and servicing of the equipment.

Including supplying field testing plans, testing instrumentation, reports, training manuals, and any necessary materials for training.

Government will arrange for training at least 3 weeks prior to on site dates.

All equipment shall be supplied in brand new, unused, condition. All equipment shall come from the manufacturer with full USA manufacturer warranty. Equipment shall be approved for sale in the United States by the original equipment manufacturer (OEM).

Vendor shall certify that it is a Manufacturer Authorized Partner as of the date of the submission of their offer, and that it has the certification/specialization level required by the Manufacturer to support both the product sale and product pricing, in accordance with the applicable Manufacturer certification/specialization requirement. Unless otherwise specified, Vendor shall warrant that the products are new, in their original box.

(End of Summary of Changes)