N6426723Q0078 Amend 1.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this amendment is to update section C identifying 25ft HDMI cable, 100Ft SDI connector, no requirement for remote controls and to extend the solicitation date. All other terms and conditions remain the same.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 4

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 24-Feb-2023

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X N6426723Q0078

X 9B. DATED (SEE ITEM 11)

17-Feb-2023

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

24-Feb-2023

CODE

NAVAL SURFACE WARFARE CENTER CORONA DIV.

1999 FOURTH STREET BLDG 510

NORCO CA 92860

N64267 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

N6426723Q0078

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION A - SOLICITATION/CONTRACT FORM

The required response date/time has changed from 24-Feb-2023 10:00 AM to 01-Mar-2023 10:00 AM.

SECTION C - DESCRIPTIONS AND SPECIFICATIONS

The following have been modified:

PURCHASE DESCRIPTION

SALES TAX EXEMPTION

The contractor is hereby advised that the United States Government and Agencies thereof are exempt from State and Local Government tax by virtue of Article 6 of the United States Constitution. No exemption certificate is required.

1. INTRODUCTION

RS32 has a requirement to procure Camera Equipment

2. BACKGROUND

RS32 requires the procurement of the following camera equipment:

SONY BRC-H800 4K PTZ CAMERA WITH HDMI, IP & 3G-SDI OUTPUT (BLACK)

HD PTZ CAMERA W/ 1" CMOS SENSEOR AND PoE+

WALL MOUNT BRACKET FOR PTZ CAMERAS

WALL MOUNT BRACKET BRC-WMZ330 COMPATIBLE WITH BRC-X400

SONY AC ADAPTER FOR BRC CAMERA

SONY AC ADAPTER FOR BRC CAMERA

3. Requirements

CLIN

Brand Name

P/N DESCRIPTION QTY

001 SONY BRC-H800/1

SONY BRC-H800 4K PTZ CAMERA WITH HDMI, IP

& 3G-SDI OUTPUT, 1” CMOS sensor & PoE+ (BLACK) Camera configuration shall include Password protection. Preventing 3rd parties (on the same network) from changing camera configuration.

Integrated swivel base Supports 4k format Clear Zoom 18 x zoom at 4K & 24x zoom at HD. Tele

Convert Mode enables a maximum equivalent of 48x telephoto zoom performance.

PoE+ (Power over Ethernet Plus - IEEE802.3at) support enables power supply via a network cable.

Built-in pan-tilt head – can pan left/right +/-170 degrees, up to 90 and down 30 degrees, max pan speed 60 degrees/second.

100 programmable presents positions Multi-format support: 3840×2160/29.97p (2SI), 1920×1080/59.94p, 1920×1080/59.94i, 1280×720/59.94p 3840×2160/25p (2SI), 1920×1080/50p, 1920×1080/50i, 1280×720/50p 3840×2160/23.98p(2SI), 1920×1080/23.98p Switching possible with the SYSTEM SELECT switch See section 3.2 below for connection requirements & additional description

002 SONY BRC-WMALLK WALL MOUNT BRACKET FOR PTZ CAMERAS 3

003 SONY BRC-WMZ330

WALL MOUNT BRACKET BRC-WMZ330 COMPATIBLE

WITH BRC-X400

004 SONY ACPW20 SONY AC ADAPTER FOR BRC CAMERA 13

Shipping cost included in unit cost

The contractor shall provide the following Brand Name equipment as listed in Table-1 above.

3.1 Minimum needs for the camera equipment shall be equivalent to that identified (by part numbers listed) in

Table -1. At a minimum the camera equipment shall:

Camera configuration shall include password protection. Preventing 3rd parties (on the same network) from changing camera configuration.

Integrated swivel base Supports 4k format Clear Zoom 18 x zoom at 4K & 24x zoom at HD. Tele Convert Mode enables a maximum equivalent of 48x telephoto zoom performance.

PoE+ (Power over Ethernet Plus - IEEE802.3at) support enables power supply via a network cable.

Built-in pan-tilt head – can pan left/right +/-170 degrees, up to 90 and down 30 degrees, max pan speed 60 degrees/second.

100 programmable presents positions

Multi-format support: 3840×2160/29.97p (2SI), 1920×1080/59.94p, 1920×1080/59.94i, 1280×720/59.94p 3840×2160/25p (2SI), 1920×1080/50p, 1920×1080/50i, 1280×720/50p 3840×2160/23.98p(2SI), 1920×1080/23.98p Switching possible with the SYSTEM SELECT switch

Zoom performance – 12x optical zoom, it uses Sony’s 2x (When shooting at 1920×1080, 1.5× when shooting at 3840×2160) Clear Image Zoom function and 2x Tele Convert mode (When shooting at 1920×1080 only) to achieve the equivalent of up to 48x When shooting at 1920×1080) telephoto performance.

Built-in Night/Day (ND) filter - camera shall be equipped with a built-in adjustable ND filter levels (levels:

off, ¼, 1/16 & 1/64) permitting light level adjustment in bright lighting conditions without changing the shutter speed or iris.

Tally Lamp indicator – front & back w/ adjustable intensity, on/off switch ability, and “camera fault” detection.

Power lamp indicator – green / orange (Power) /yellow (for upgrading firmware) Network indicator

Connection information – cameras shall include:

RS422 connection, w/cable length 1.2km, set for VISCA communications Compatible w/ switcher MCX-500

(1) HDMI output connector 25ft length

(2) SDI video output connectors w/ format/level setting (between 1920×1080/50p or

1920×1080/59.94p) 100ft length BNC connector Compatible with remote controllers: RM-IP500 & RM-IP10 AC adapter cord clamper – secures power cord Switchable Baud Rate setting (between 38400 bps & 9600 bps)

(1) Monitor out camera signal (4k or HD)

(1) RJ-45 LAN (network terminal

Fully Compatible w/ Sony Remote Camera System - Edge Analytics Appliance (EAA) – note: cameras other than Sony BRC-H800 color video camera (listed on the sponsor’s Approved Products List), cannot achieve the accuracy of video analysis required for the Edge Analytics Appliance.

Camera software updates shall be fully compatible with Sony EAA system software and Sony

EAA System software updates When connected to the range network, camera shall be compatible w/range protection protocols – routers, firewalls and other range security / protection systems in place.

No Remote Controllers.

1 year standard MFGer warranty

3.2 Vendor Qualifications: All equipment shall be supplied in brand new, unused, condition. All equipment shall come from the manufacturer with full USA manufacturer warranty. Equipment shall be approved for sale in the United States by the original equipment manufacturer (OEM).

3.3 In order to minimize the risk to the Government purchasing: counterfeit products or unauthorized secondary market equipment, (which would not be supported by the OEM), and to ensure that the Government purchases only equipment that is genuine (i.e., not counterfeit or grey market), authorized (e.g., including appropriate licenses), and supported (e.g., warranty and support services) by the OEM, Vendor shall warrant and/or certify:

Products shall be new, in their original box.

The Vendor is a Manufacturer Authorized Partner (as of the date of the submission of their offer), and that it has the certification/specialization level required by the Manufacturer to support both the product sale and product pricing in accordance with the applicable Manufacturer certification/specialization requirement.

3.4 Shipping shall be included in the unit cost. Offers shall only include manufacturer, model, description, and part number (see Table – 1).

(End of Summary of Changes)