N6426720Q0061 Draft SOW.pdf

PURCHASE DESCRIPTION

EC Spectracom SAASM (16P43)

1. INTRODUCTION

The Naval Surface Warfare Center Corona Division (NSWC CORDIV), Range Systems Department RS31, requires SAASM (Selective Availability Anti-Spoofing Module) GPS equipment (Chassis & Circuit Card Assemblies) in support of the Systems Replacement And Modernization (SRAM) Program.

2. BACKGROUND

The Naval Surface Warfare Center Corona Division (NSWC CORDIV), Range Systems Department RS31, requires SAASM (Selective Availability Anti-Spoofing Module) GPS equipment (Chassis & Circuit Card Assemblies) in support of the Systems Replacement And Modernization (SRAM) Program to support various ranges.

3. REQUIREMENTS

The contractor shall provide the following items to the 5 sites as listed below:

Site #1 - Oceana CLIN Manufacturer P/N DESCRIPTION QTY

001 Spectracom 1200-037 SecureSync Time and Frequency Synchronization System – SAASM based GPS receiver w/Rubidium Oscillator

002 Spectracom 8225S GPS SAASM Antenna Outdoor 2

003 Spectracom 1204-1B Option Card: Have Quick Module RS-485 Output 3

OPTION - Spares

004 Spectracom 1200-037 SecureSync Time and Frequency Synchronization System – SAASM based GPS receiver w/Rubidium Oscillator

005 Spectracom 8225S GPS SAASM Antenna Outdoor 4

006 Spectracom 1204-1B Option Card: Have Quick Module RS-485 Output 4

Site #2 - Cherry Point CLIN Manufacturer P/N DESCRIPTION QTY

007 Spectracom 1200-037 SecureSync Time and Frequency Synchronization System – SAASM based GPS receiver w/Rubidium Oscillator

008 Spectracom 8225S GPS SAASM Antenna Outdoor 1

009 Spectracom 1204-1B Option Card: Have Quick Module RS-485 Output 1

Site #3 - Beaufort CLIN Manufacturer P/N DESCRIPTION QTY

010 Spectracom 1200-037 SecureSync Time and Frequency Synchronization System – SAASM based GPS receiver w/Rubidium Oscillator

011 Spectracom 8225S GPS SAASM Antenna Outdoor 4

012 Spectracom 1204-1B Option Card: Have Quick Module RS-485 Output 5

Site #4 – Jacksonville CLIN Manufacturer P/N DESCRIPTION QTY

013 Spectracom 1200-037 SecureSync Time and Frequency Synchronization System – SAASM based GPS receiver w/Rubidium Oscillator

014 Spectracom 8225S GPS SAASM Antenna Outdoor 2

015 Spectracom 1204-1B Option Card: Have Quick Module RS-485 Output 3

Site #5 - Key West CLIN Manufacturer P/N DESCRIPTION QTY

016 Spectracom 1200-037 SecureSync Time and Frequency Synchronization System – SAASM based GPS receiver w/Rubidium Oscillator

017 Spectracom 8225S GPS SAASM Antenna Outdoor 1

018 Spectracom 1204-1B Option Card: Have Quick Module RS-485 Output 1

The contractor shall provide listed equipment identified in CLINs 001 – 018. CLINs 004 to 006 are options for the system; therefore, the purchase of these items is at the government discretion.

Equipment is required to interface with existing Rockwell Collins 721S radios

Salient Characteristics

CLIN 001, 004, 007, 010, 013, 016 – SecureSync Time and Frequency Synchronization System – SAASM based GPS receiver w/Rubidium Oscillator

Shall contain Rubidium internal oscillator

Shall be a Ground Based GPS Receiver Application Module (GB-GRAM)

Shall include power cord

Receiver Input: L1/L2, P(Y) code (PPS), SAASM GB-GRAM

GB-GRAM Tracking: shall be 12 parallel, dual frequency channels with RAIM (Receiver Autonomous Integrity Monitoring)

Shall be capable of providing Have Quick in clear or covered / encrypted format / wave form

Temperature range between: -20 to +65 degrees C

Humidity range 0%-95% RH non-condensing @40 C

Width shall be less than 19 inches

Shall include rack mount hardware to mount unit into a standard 19-inch rack

Acquisition Time: Cold start < 20 minutes

Shall have RJ-45 and 10/100 Base-T Network Ports

Serial set-up interface shall include RS-232 communications on DB-9 connector

System Performance Parameters:

o 1 PPS Output:

Accuracy to UTC: +/- 25 ns Holdover (constant temp after 2 weeks of GPS lock)

After 4 hours: 0.2 µs

After 24 hours: 1 µs o Signal Waveform & Levels: TTL (5v p-p), into 50 ohm, BNC

Power Draw: 50 W normal, 80 W start-up

Crypto Key input: DS-102. Compatible with AN/PYQ-10, AN/CYZ-10, KK-13. Black and red key support.

Shall be compatible with the Rockwell Collins 721s radio set

Shall have interface design compatible with the Rockwell Collins RS485 interface

Shall support minimum 6 option card slot for the HaveQuick RS485 Output Module

CLIN 002, 005, 008, 011, 014, 017 – GPS SAASM Outdoor Antenna

Shall include the following characteristics:

Required Antenna Characteristics

L1 L2

GPS Frequency Range

1575.42 MHz +/-15MHz 1227.60 MHz +/-15MHz

LNA Gain 33 dB 35 dB

Rejection at +/- 50 MHz -41 dB/-59 dB -40 dB / -40 dB

Rejection at +/- 100 MHz < -65 dB < -65 dB

Right Hand Circular Polarization (RHCP) required

Low Noise Amplifier (LNA) Noise: 3.0 dB

LNA P1dB Out: + 13dBm

LNA DC Power: 3.3V/35mA

Impedance: 50 ohms

Voltage Standing Wave Ratio (VSWR): < 1.5:1

Female N type Connector

Weight: less than 8 oz

Shall be weather-proof and able to be mounted outdoors

Temperature Range: -67 F to 185 F

Shall be compatible with CLIN 001, 004, 007, 010, 013, 016

CLIN 003, 006, 009, 012, 015, 018 – Option Card: Have Quick Module RS-485 Output

Shall have four HaveQuick RS-485 configuration outputs

Signal Type and Connector:

o Input shall be TTL (BNC) o Output shall be RS-485 on terminal block

Accuracy: +/- 50ns

Programmable Phase Shift: +/- 5ns to 500 ms with 5ns resolution

Load Impedance: 120 Ω Output

Signal Start: < 10 µs after 1PPS output

Shall support formats:

o STANAG 4246 HAVE QUICK I o STANAG 4246 HAVE QUICK II o STANAG 4372 HAVE QUICK IIA o STANAG 4430 Extended HAVE QUICK o ICD-GPS-060A HAVE QUICK

Shall be compatible with CLIN 001, 004, 007, 010, 013, 016

Shall be compatible with the Rockwell Collins 721s radio set and RS485 interface

All equipment shall be supplied in brand new, unused, condition. All equipment shall come from the manufacturer with full USA manufacturer warranty. Equipment shall be approved for sale in the United States by the original equipment manufacturer (OEM).

In order to minimize the risk of the Government purchasing counterfeit products or unauthorized secondary market equipment, which would not be supported by the OEM, and to ensure that the Government purchases only equipment that is genuine (i.e., not counterfeit or grey market), authorized (e.g., including appropriate licenses), and supported (e.g., warranty and support services) by the OEM.

Vendor shall certify that it is a Manufacturer Authorized Partner as of the date of the submission of their offer, and that it has the certification/specialization level required by the Manufacturer to support both the product sale and product pricing, in accordance with the applicable Manufacturer certification/specialization requirement. Unless otherwise specified, Vendor shall warrant that the products are new, in their original box.

Shipping shall be included in the total cost; proposals for bid shall include manufacturer, model and part number proposed.

All material sought in this procurement will be installed by NSWC Corona personnel; therefore, installation is outside of the scope of this contract.

A. SHIPPING ADDRESS

Oceana (CLIN 001-006) NSWC Corona 761 B Ave BLDG 210, NAS Oceana Virginia Beach, VA 23460

Cherry Point (CLIN 007-009) NSWC Corona BLDG 4280, 6th Ave MCAS Cherry Point, NC 28533

Beaufort (CLIN 010-012) Beaufort TCTS

BLDG 1078 MCAS

Beaufort, SC 29904

Jacksonville (CLIN 013-015) NSWC Corona FACSFAC 118 Albemarle Ave NAS Jacksonville, FL 32212

Key West (CLIN 016-018) NSWC Corona

BLDG A4082

NAS Key West Key West, FL 33040