Draft_SOW_Apogee_Labs.doc

ADVANCED TELEMETRY SYSTEM – CLASSIFIED/UNCLASSIFIED (ATS-C/U)

APOGEE LABS AL1025 Quad Channel TMoIP Processor

1. INTRODUCTION

The Naval Surface Warfare Center (NSWC), Corona Division, Performance Assessment Department, Code PA44 requires two APOGEE LABS AL1025 Quad Channel TMoIP Processor to be used on the ADVANCED TELEMETRY SYSTEM – CLASSIFIED/UNCLASSIFIED (ATS-C/U) in support of missile testing for various RDT&E projects. The APOGEE LABS AL1025 is an integral component of our shipboard portable ADVANCED TELEMETRY SYSTEM – CLASSIFIED/UNCLASSIFIED (ATS-C/U). This system will be used to translate TM data into packetized IP data, transportable from ATS-C/U to/from TM ranges. TM data is used in the performance and readiness assessment of Fleet combat systems during these exercises.

2. BACKGROUND

The NSWC Telemetry Systems Branch (PA44) facility at Corona has a requirement to support the missile testing for RDT&E projects at various missile test ranges beginning immediately. In order to meet this requirement, Naval Surface Warfare Center (NSWC), Corona Division, Performance Assessment Department, Code PA44 requires the APOGEE LABS AL1025 listed in the specifications to be fully integrated by December 1, 2018 in our ATS -C/U portable telemetry system. The items listed in this SOW are a hard requirement in order to successfully execute the missions on the schedule for this project.

AL1025

OPT-1

Quad Channel TMoIP Processor

12 Month Extended Warranty

3. SCOPE

4. APPLICABLE DOCUMENTS

N/A

5. REQUIREMENTS

The APOGEE LABS AL1025, as a component of the NSWC Corona ADVANCED TELEMETRY SYSTEM - CLASSIFIED/UNCLASSIFIED (ATS-C/U), is required meet or exceeds the following requirements:

Technical Data

PCM Data Specifications

· Input: 100 Kbps - 40 Mbps per channel, TTL/422 data & clock Input – 50/75 Ohm, BNC/Triax connectors

· Output: 100 Kbps – 40 Mbps per channel, TTL/422 data & clock Input – 50/75 Ohm, BNC/Triax connectors

· Integrated BERT with rates from 100 Kbps – 40 Mbps

· SNMP v2 and v3, 10/100/1000 Mbps Ethernet connectivity

· Supports: TCP/IPv4/IPv6, TMoIP, SMB, ICMPv6, UDP/IP Unicast, UDP/IP Multicast, UDP/IP Broadcast, SSH/Telnet, ARP, DHCP, RUDP

· Supports SNTP and IRIG-B Environment

· IEC 320-C14 power jack, 90-264 VAC

· Operating temperature: 0 – +55 °C

· Storage temperature: -40 - +70 °C

· Front panel interface for display and setup

· 17” x 13” x 1.75” (W x L x H)

· Humidity up to 95% non-condensing

WARRANTY DESCRIPTION:

The APOGEE LABS AL1025 includes one and a half (1.5) years (18 month) hardware warranty and lifetime software support. Additionally, all APOGEE LABS AL1025 include technical support and software/firmware upgrades at no charge for the life of the system. In addition to the 18-month standard warranty, we will procure a 12-month extension to have a total of 30-month warranty.