Specifications_for_Microwave_Communication_Equiptment.pdf

3.0 SPECIFICATIONS

The following salient characteristics represent the minimum technical requirements for the Aviat

Microwave equipment. This microwave system will be utilized by the Tactical Training Range at Fallon, NV. The range requires an OC3 microwave data link between Mt. Callaghan and New Pass Peak. The

Range requires that SRAM only purchase and delivers equipment through this requirement. Equipment is described in the specifications below.

Standard Features:

1.0 General Requirements

1.1 All-indoor microwave radio deployable with Eclipse Intelligent Node Unit or IDU GE3 unit

1.2 Supports hybrid TDM and native Ethernet/IP transport

1.3 Transparent to all types of traffic, including all-IP, all-TDM, or hybrid

1.4 High capacity transport up to 260 Mbit/s, 127xDS1 or 4xDS3 or 1xOC-3

1.5 Indoor, ultra-compact chassis design-2 RMS for 1+1 Protected RFU + ACU

1.6 Standard and High Tx power options

1.7 Built-in expansion port for simplified expansion, connection to existing radio antenna systems and network cutover

1.8 FIPS 140-2 Level 2 validated, FIPS 197 validated

1.9 Expandable with link aggregation for ultra-high capacities and advanced configurations

1.10 Adaptive Coding & Modulation support up to 256 QAM

2.0 Technical Requirements

2.1 Frequency Band options: 5.8, L6, U6, 7, 8, 10, 11 GHz

2.2 Capacity support: 11-260 Mbit/s Ethernet, 7 to 127x DS1; 1,3,4xDS3; 1xOC-3

2.3 Modulation support: Fixed or Adaptive Coding and Modulation, QPSK, 16,32, 64, 128, 256 QAM

2.4 Transmitter specifications: Transmit Power Standard and high power available

2.5 Manual Transmitter Power Control range 10.5 to 20 dB

2.6 Automatic Transmitter Power Control Configurable over full available manual attenuation range

Transmitter Mute > 50 dB

2.7 Channel Selection By software control within tuning range of RFU

2.8 Receiver Specifications: Frequency Stability ± 10 ppm

2.9 Receiver Overload (BER= 1x10^-6) -22 dBm

2.10 Residual (Background) Bit Error Rate Better than 10-13

3.0 Power Requirements

3.1 24/48 VDC operation

3.2 Nominal power consumption, 52 W / 90 W (1+0, SP / HP), 82 W / 124 W (1+1, SP / HP)

The table below lists the CLIN, Description, and Part Number that have the ability to meet the

Governments minimum requirements.

CLIN DESCRIPTION PART NUMBER

Eclipse Products

0001 IRU600 RFSec Assy FD 1 ANT MAIN, 3RU V2, HP 7/HP 7 GHZ EV110-H7-H7-100

0002 WG EXT KIT 7GHz 1rst SHLF 2+0/FD 179-530090-0115

Eclipse Accessories

0003 ECLIPSE, INTELLIGENT NODE UNIT 2RU, INC IDCE, FAN,

NCCV2, HIGH OUTPUT

EXX-000-204

0004 Kit Bracket 2RU 179-530064-001

0005 NODE PROTECTION CARD, HIGH OUTPUT EXS-002

0006 Aux, Alarm I/O Card EXA-001

0007 RAC 60E, QPSK-256 QAM, High Gain, No XPIC, ACM & Sync-E EXR-660-002

0008 Eclipse, DAC 16XE1/DS1 V2, Protectable EXD-161-001

0009 DAC GE3 Gigabit Ethernet Switch Card EXD-181-002

0010 Gigabbit Ethernet SFP, OPT MMF 850nm LC 1000BASE-SX, <550M

(LM28-C3S-TC-N)

079-422662-001

0011 Cable Protection / Bridging GE3, Direct Fit, 1M 037-579461-001

0012 Splitter MM LC-LC to LC 10M 037-579486-010

0013 2x HDR-E50 to Y join to 24AWG Free End 15.5M (HDR-E50MSG1-

Y-15M)

037-579408-015

0014 Cable, Alarm I/O Hd15 to Wirewrap, 15M 037-579470-015

0015 M66 Punch-Down Block Kit 179-530132-001

0016 Node SW License, 200 Mbps total Radio Payload Capacity EZE-08004

0017 Secure Mangement, INU, inc SNMPv3 EZF-03

0018 Payload Encryption Nodal RAC60/6X/60E/6XE EZF-04

0019 Radius Client, Centralized User Acct Mgmt EZF-06

0020 Strong Security FIPS 140-2 Compliant EZG-42

0021 FIPS Installation Kit 179-530153-001

Cables & Flex waveguide

0022 NMS Cable, Rj45 to Rj45, Shielded, 15 Meters 037-579126-002

0023 FLEX WAVEGUIDE WR112, 7.05-10.0 GHZ, CPR112G/CPR112G,

24 IN (F112CCS2, FT15-PVZ-021-021/M600)

FWG-083200-600

Provision Element Management System

0024 PROVISION SOLUTION PACK - 50 NODES 614-225061-002

9999 Estimated Freight - Corona, CA FREIGHT

Shipping shall be included in the total cost.

4.0 REQUIRED DELIVERY DATE: (Enter required receipt of goods date)

60 days ARO