SOW_ANSWG_Cable_Panel.pdf

Revision: June 01, 2018

Statement of Work AN/SWG-5(V) 3 CABLES/PANELS FOR TTWCS v5.4.0.2

I. Scope This Contract encompasses the tasks required to procure and deliver AN/SWG-5(V) 3 cables and panels to the Government. This Contract intended to be a Firm Fixed Price single award contract. The Contractor shall ensure the materials delivered to the Government are correct and meet specifications of the Drawings provided as Government Furnished Information (GFI). There is no engineering or technical tasking associated with this Contract however, technical expertise will be required to understand and comply with Drawings and to identify discontinued or obsolete parts.

II. Background The Naval Surface Warfare Center Port Hueneme Division (NSWC PHD) is task with procuring multiple cables and panels used in the US NAVY MK 43 MOD 0, Tomahawk Tactical Weapon system (TTWS) specifically used to build the AN/SWG-5(V)3 Tomahawk Tactical Weapons Controls System (TTWCS).

Navy regulations call for any fielded weapons system that is to be install on a US Navy ship must first pass Environmental Qualification Testing (EQT). EQT regulations calls for any weapons system to pass all EQT using the same configuration of components, assembled in the same manner in order for that configuration to be approved for production and installation aboard a US Navy ship. These items are needed to assemble a Tomahawk Equipment Cabinet (TEC) drawing 8501779 and an Advanced Tactical Display Console (ATDC) drawing 8501850. The items cannot have alternate part numbers and must be manufacture to their associated drawings meeting all military specifications called for in the drawing.

On-time delivery of these materials is critical to meet program schedules.

III. Definitions COTS – Commercial Off the Shelf DMSMS – Diminishing Manufacturing Sources and Material Shortages FOB – Freight On Board KO – Government Contracting Officer NSWC PHD – Naval Surface Warfare Center Port Hueneme Division SOW – Statement of Work

IV. Tasks General:

a) The Contractor shall deliver all items within the schedule specified.

b) The Contractor shall procure cables and panel’s assemblies in accordance with associated drawings number.

c) The Contractor shall not deviate from part requirements as detailed in the drawings.

Drawings:

d) Contractor shall not substitute, change, or modify Drawings.

e) The Contractor shall manufacture and assemble all components to the specifications of the

Drawings provided as GFI. The Contractor shall adhere to all applicable Military Standards, specifications, and requirements on each Drawing.

f) If the Contractor determines that the materials cannot be procure or materials listed are incompatible due to obsolescence / DMSMS, the Contractor shall contact the Government KO to resolve any issues.

Counterfeit Parts and Materials:

g) The Contractor shall implement procedures to minimize the risk of procuring and / or using counterfeit parts and materials. Counterfeit parts may typically be used parts, which been refurbished and represented as new. These parts may or may not contain authentic components, and will often pass most if not all of the performance requirements and specifications. However, the part reliability may have been compromise during removal, handling, or remarking, and a reduced life be expected. Counterfeit mechanical parts typically improperly made, marked, or treated. Examples are improper anodize or heat treatments (including falsified data), mismarked parts sold as a higher grade material, or used parts such as fasteners and sockets.

h) Solicitations and subcontracts for all suppliers shall contain a requirement for procedures to minimize the risk of procuring and / or using counterfeit parts and materials.

V. Packaging All materials shall be packaged using best commercial practices. The cable and panel shall be individually packaged and marked with part numbers and serial numbers (if applicable) clearly visible on the package exterior. All packages shall be marked with the delivery order number and assembly date clearly visible on the package exterior.

VI. Delivery The Contractor shall deliver materials to the Government via traceable means by the dates provided in the purchase order. Inspection and acceptance will be perform at the Naval Surface Warfare Center Port Hueneme Division. All materials shall be delivered with transportation prepaid and FOB Destination. The Government reserves the right to inspect and accept all materials up to 15 calendar days after receipt. Estimated delivery time is 15 weeks ARO.

VII. Government Furnished Property / Information The Government will provide Government Furnished Information (GFI) for this Contract. The Contractor shall use the GFI only in the execution of this contract. All GFI shall be return to the Government before the Contract ends. The Contractor shall retain no rights to the GFI or any derivatives thereof. The GFI’s will include:

Attachment 1:

PART # DRAWING # PART DESCRIPTION

20534614P01 70734-C PANEL, BLANK, 19 IN, 1U

7110988-3 7110988B EXTRUSION, T-SLOT PROFILE

74308-1 74308C/74308PLrC POWER CABLE, 19 INCH MONITOR (W8)

74309-1 74309-C/PL74309E POWER CABLE, 19 INCH MONITOR (W9)

8501838-13 8501838D CABLE ASSEMBLY, ETHERNET (A2W25)

8501838-15 8501838D CABLE ASSEMBLY, ETHERNET (A9W1)

8501842-01 8501842 CABLE ASSEMBLY (W401)

8501851-01 8501851 CABLE, MONITOR VIDEO (W40)

8501851-02 8501851 CABLE, MONITOR VIDEO (W13)

8501861-01 8501861 RETAINER BLOCK, SIDE

8501862-01 8501861 RETAINER BAR, FRONT

8501869-01 8501869 PLATE, RETAINER

8501870-01 8501870 I/O PANEL, OUTER HOUSING

8501874-01 8501874 CABLE ASSEMBLY, GROUND 12AWG, (W4)

8501874-02 8501874 CABLE ASSEMBLY, GROUND 12AWG, (A9W3)

8554671-01 8554671-A CONNECTOR RETAINER, PS2

8554678-01 8554678-A LANYARD, CABLE RETRACTOR ARM (VME, MTC, ROUTER)

8554678-02 8554678-A LANYARD, CABLE RETRACTOR ARM (RMP)

8554678-03 8554678-A LANYARD, CABLE RETRACTOR ARM (AUX)

8554678-04 8554678-A LANYARD, CABLE RETRACTOR ARM (PDU)

8554678-05 8554678-A LANYARD, CABLE RETRACTOR ARM (UPS)

8554681-01 8554681 TERMINAL BOX MOUNTING PLATE

8605425-01 8605425 PLATE, Y-MOUSE ADAPTER

8605464-01 8605464 RETAINER CABLE ENTRY PANEL

8605469-01 8604469 PLATE, CABLE ENTRY PANEL

8749416-01 8749416-A CABLE ASSEMBLY, ROUTRE POWER and TIME METER (A2W2)

8501783-01 8501783-A BRACKET, MEDIA CONVERTER

20534262G01 20534262 CABLE ASSEMBLY (W6), NTDS A

20534263G01 20534263 CABLE ASSEMBLY (W5), NTDS A

74406-2 74406 BASE PLATE

VIII. Place of Performance The Contract shall be perform at the Contractor’s facility.