Amendment Load Bank C-D.pdf

1301082220

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

53.243The purpose of this modification is to revise the spec. NSSF Load Bank REV C w as modif ied due to an error in section 3.3.2 for the grounding cable.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 5

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 15-May-2023

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street , County, State and Zip Code) X N6278923Q0011

X 9B. DATED (SEE ITEM 11)

02-May-2023

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

15-May-2023

CODE

SUPSHIP GROTON

CONVERSION AND REPAIR, USN

73 EASTERN POINT ROAD

GROTON CT 06340-4909

N62789 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

N6278923Q0011

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 1449 - CONTINUATION SHEET

The following have been modified:

SPEC

NAVAL SUBMARINE SUPPORT FACILITY (NSSF)

ORIGINATOR: Michael Eaton

Phone: 860-694-2452

DATE: 15 MAY 2023

REV C.

1. SCOPE:

TITLE: RESISTIVE/REACTIVE LOAD BANK FOR NSSF

2. REFERENCE/PLANS:

2.1 None

3. REQUIREMENTS:

3.1 The contractor shall provide one (1) load bank and associated cables with resistive and reactive load elements whose configuration and capacity meets the following minimum requirements:

3.1.1 Minimum capacity range of 1500 KVA with a power factor (PF) of .8, 1200KW resistive, 900 KVAR inductive, 480 Volts AC, 3 phase, 3-Wire, 60 Hertz.

3.1.2 Load Step Resolution of 1KW/0.75KVAR.

3.1.3 PLC-based touch-screen controller in a suitcase-style enclosure (or equivalent) and have digital controller on the cabinet.

3.1.4 Continuous Duty in ambient temperature range of 0 degree Fahrenheit up to 120 degrees Fahrenheit.

3.1.5 Power input shall be Cam-Lock quick disconnects assembled onto all three bus-bars with Hubbell-Crouse-Hinds J-16 series (or equivalent) male, 45 degree facing down to the ground. These connections shall be labelled as “Phase A”, “Phase B”, “Phase C”, and “Ground”.

3.1.6 Load Bank shall have forklift pockets and meet ASME B56.1 safety standards for forklifts.

3.1.7 Identification information with weight and electrical capacity shall be stenciled on a minimum of two sides of the unit with lettering 2 inches minimum in height.

3.1.8 Load Bank shall have latches on doors to prevent accidental opening during transport.

3.1.9 Load Bank shall have a high quality paint applied to prevent rust and suitable for storage outdoors in a marine environment.

3.1.10 Load Bank shall be constructed using heavy gauge steel per ASTM A463and be designed for continuous outdoor weatherproof operation.

The Load Bank shall have pad eyes /fittings installed to allow for overhead lifting.

3.1.11 One year manufacture warranty on replacement parts.

3.1.12 Quantity five (5) spare fuses shall be provided for all installed fuses.

3.2 Contractor shall provide one (1) Amprobe model number AMP-320 clamp-on Amp Meter (up to 600A and 600V) or equivalent.

3.3 Cables shall meet the following requirements:

3.3.1 Provide Twenty-One (21) seventy-five (75) feet long, power transmission cables, 4/0 AWG, 480VAC-400AMP rated, Type-W.

Seven (7) cables with black cam-locks, seven (7) with red cam locks, and seven (7) with blue cam-locks.

3.3.1.1 Each cable shall have one end equipped with

Hubbel1-Crouse-Hinds J-16 series (or eqivilant) Male, straight cam-lock and the other end shall be Hubbel1- Crouse-Hinds J-16 series (or equivalent) Female, Straight cam-lock.

3.3.2 Provide one (1), seventy-five (75) feet long ground cable, 4/0 AWG, 480VAC-400AMP rated, Type-W equipped with a Green Colored Hubbell-Crouse-Hinds J-16 series (or equivalent) Female, straight cam-lock on one end; grounding “C-clamp” on the other end.

3.4 Training and certification.

3.4.1 Conduct on-site training for two days at Naval Submarine Base New

London, located in Groton CT., on the 1500kVA (min) load bank and associated equipment for proper connection, operation and familiarization to Government employees as mutually scheduled between the Contractor and Government representative.

3.4.2 Provide one hard copy and one digital copy of the Operation and Maintenance Manual specific to the provided equipment.

3.4.3 Lifting & Handling (pad-eye) Certification.

3.5 Contractor shall Deliver/Ship to (FOB Destination). Delivery must be accomplished between Monday - Friday between 0700 and 1330 EST.

Delivery location is as follows:

SUB BASE NEW LONDON CT

NSSF NLON, R6-25D

Amberjack Road BLDG 17 2nd Deck

LOWER SUBMARINE BASE

Groton, CT 06349 M/F: Jim Crudden Phone: 860-694-2424

4. NOTES:

4.1 Contractor shall provide a Certificate of Compliance (Contractor’s format). The

Certificate of Compliance shall certify that all work performed and replaced components comply with the requirements of the procurement documents, invoked specifications and drawings, and assert that the physical and chemical properties (material type, yield strength, tensile strength, elongation or hardness testing) are as specified in the contract specifications.

The certificate shall include:

a. Contractors name, address, phone number and date.

b. The issuing agency’s purchase order number.

c. Item nomenclature of the purchased item (the product is identified by description, amount, lot number, etc.).

d. Contractor’s or authorized person’s signature.

4.2 The Government will provide folk-lift services.

4.3 For Contractor personnel that do not have a CAC card or a NCACS card, the following is required to obtain DBIDS credentials to gain access the base:

a. Ensure you provide the names of personnel requiring access to the SUBASE to the RSG POC. RSG will pass the information to the SUBASE Pass and ID office as your Government Sponsor.

b. Upon arrival at SUBASE, Present valid identification, Real ID Act-compliant state driver's license. If you don’t have a Real ID compliant driver’s license, you can use a passport. If you do not have a passport, you will be required to have an original birth certificate and your social security card (not just your number).

c. Present a completed copy of the SECNAV 5512/1 form to obtain your background check. A copy of SECNAV 5512/1 can be obtained by contacting the RSG POC. Upon completion of the background check, the Visitor Control Center representative will complete the DBIDS enrollment process, which includes your photo, finger prints, base restrictions, and several other assessments; after all this is done, you will be provided with your new DBIDS credential. You may now proceed to enter the base. The Government assumes no liability for failed background checks and all cost incurred as a result of failed background checks is the responsibility of the Contractor.

5. GOVERNMENT FURNISHED MATERIAL (GFM):

5.1 None

(End of Summary of Changes)