8284v005-V006__TRUNK-TILT_ASSY_SSJ_Signed_Redacted.pdf

JUSTIFICATION FOR SOLE SOURCE (SAP <$150k) Ref: FAR 13 . 106 and NAVSUP 4200 . 85D Chapter 5 Para. 2.b. (5)

The service or material listed on 8284-V005 , 8284-V006 is sole source and competition must be restricted to one source , or to only one brand name for reasons indicated below. There are no substitutes available for this material .

Restricted to the following source or brand name. Provide origina1 manufacturer ' s name .

(If a sole source manufacturer distributes via dealers , ALSO provide dealer information.)

Manufacturer : Zetec Inc .

Manufacturer POC & Phone Nr: Scott Hower 425-974-2700 Mfr . Address : 8226 Bracken Place SE Suite 100 Snoqualmie , Wa.98065 Manufacturers Dealer/Rep : n/a Dealer/Rep Address/Phone Number : n/a

X Description of the item or service required , the estimated cost , and required delivery date .

Purchase lea SM-24G Trunk I Tilt assembly, with a required delivery date of 03/30/2019 .

X Specific characteristics of the material or service that limit the availability to a sole source or particular brand name (unique features, function of the item , etc . ).

Describe in detail why only this suggested source can furnish the requirements to the exclusion of other sources .

This SM-24G trunk assembly is custom designed for the Zetec SM-24G In-Head Mechanism. The trunk assembly provides an up and down motion for the pole assembly on the SM-24G and also extends the SM-24G into the shipboard component .

The requested material or service represents the minimum requirements of the government

CHECK & FILL IN ALL APPLICABLE BLANKS BELOW

_X_The material/service must be compatible in all aspects (form , fit and function) with existing systems presently installed. Justi Describe the equipment you have now and how the new item/service must coordinate , connect , or interface with the existing system.

This SM-24G part has to assemble with the existing SM-24G In-Head Mechanism. The trunk is equipped with electrical connectors which mate up with the existing SM- 24G wiring . The mechanism for mounting the trunk to the remainder of the assembly is specific to the SM-24G .

_ X_A patent , copyright , or proprietary data limits competition . The proprietary data is :

Zetec is the original equipment manufacturer for this equipment .

X These are "direct replacements" parts/components for existing brand name equipment .

The item being ordered is a replacement part for the Zetec design SM-24G. This part was damaged during a recent job and requires replacement prior to the next use of this equipment .

I CERTIFY THAT STATEMENTS CHECKED , AND INFORMATION PROVIDED ABOVE , ARE COMPLETE AND CORRECT TO THE BEST OF MY KNOWLEDGE AND DO NOT CONTAIN CLASSIFIED INFORMATION. I UNDERSTAND THAT THE PROCESSING OF THIS SOLE - SOURCE JUSTIFICATION PRECLUDES THE USE OF FULL AND OPEN

COMPETITION .

Signature Activity: 2320 . 5 _____________ _

Title : Date : 10/11/2010

FISCPS 4200/180 (Rev . 10/1/10)