7340V007-00044-Ordering_Data_Sheet-034.doc

ORDERING DATA SHEET – GENERAL

QTY 16 EA.

1/2" FLANGE CONDUIT ASSY, 18" LONG

HAMILL P/N: 5477-190-028-GR3 "MEETS ENGINEERING TECHNICAL ORDERING REQUIREMENTS"

SALIENT CHARACTERISTICS FOR CONDUIT AND GUIDE TUBES,

1.

The basic construction of the Conduit/Guide Tubes shall be an inner flexible stainless steel conduit section, which is then covered with polyolefin heat shrink, which is in turn covered with polyethylene terephthalate braided sleeving. The conduit shall be terminated on each end with a stainless steel end fitting.

2.

The end fittings for the conduit shall be of a flanged design and silver soldered to the stainless steel flexible conduit. For the guide tubes, the fitting on one end shall be equipped with a threaded hub to allow installation of a guide tube stick for mounting to a robotic arm.

3.

The Conduit/Guide Tubes shall be equipped with an integral retaining ring which can be used to install a quick disconnect fitting in conjunction with the flange on the end fitting.

4.

The braided sleeving shall be secured to the end fittings using two stainless steel bands.

Changes to specification or other technical requirements are not allowed without Shipyard approval via the Administrative Contracting Officer (ACO).

JOB ORDER

678mf-msupt

KEY OP

m01

KO ITEM

REV

IDN

7340-V007

IDN REV

2305.3 Form; Rev 09/2017