COMBINED_N42158-17-T-N051.doc

This is a COMBINED SYNOPSIS/SOLICITATION for commercial services prepared in accordance with the information in FAR Part 13.5, using Simplified Procedures for Certain Commercial Items, as supplemented with the additional information included in this notice. This announcement constitutes the only solicitation; a written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This combined synopsis/solicitation SHALL be posted on both FEDBIZOPPS and NECO (http://www.neco.navy.mil/).

The RFQ number is N4215817TN051. This solicitation documents and incorporates provisions and clauses in effect through FAC 2005-95 and DFARS Change Notice 20161222. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at these addresses: www.acqnet.gov/far and http://www.acq.osd.mil/dpap/dfars/index.htm. The NAICS code is 238220 and the Small Business Standard is $15 million. This is a full and open, competitive requirement.

The NAVAL SEA SYSTEMS COMMAND (NAVSEA)/ NORFOLK NAVAL SHIPYARD (NNSY) requests responses from qualified sources capable of providing:

Item 0001 -: Replacement of Fan Assemblies - Services for the removal and replacement of exhaust stack, fan, and motor assemblies in accordance with the Performance Work Statement found herein.

All aspects of service to be coordinated between authorized government representative and the contractor.

Period of Performance 05 June 2017 through 30 June 2017 Performance Work Statement

BACKGROUND:

Norfolk Naval Shipyard uses two Silentwave Series 3000 exhaust fans on the roof of Building 184 to provide dedicated ventilation to two perchloric acid chemical fume hoods on the third floor. Normal work conducted in both fume hoods have ceased due to acidic vapors from the hoods entering the air intake of the Air Handler Units (AHU) which provide service to the work zones on the second and third floor. Selected contractors will perform remediation of the exhaust stack, fan and motor assemblies. In addition, contractors will then replace the fan and motor assemblies.

LOCATION:

Building 184, Third floor and roof

Code 134

Norfolk Naval Shipyard Portsmouth, VA 23709 PERIOD OF PERFORMANCE (POP): June 05, 2017 – June 30, 2017.

· Float period for POP start: June 05, 2017 – June 9, 2017

· Float period for POP end: June 19, 2017 – June 30, 2017

EQUIPMENT SPECIFICATION:

1. Exhaust Fan 6 (EF-6), Silentwave Fan, Model 3012R A/10, manufactured by Acme Engineering Manufacturing Corporation

2. Motor accompanying EF-6.

3. Exhaust Fan 7 (EF-7), Silentwave Fan, Model 3013 A/10, manufactured by Acme Engineering Manufacturing Corporation

4. Motor accompanying EF-7.

5. Fume Hood 5 (FH-5), SafeAire Fanhood, Hamilton Industries, PL-302-2, P/N 70533

6. Fume Hood 6 (FH-6), SafeAire Fanhood, Hamilton Industries, PL-302-2, P/N 70533

PERFORMANCE PART I: REMEDIATION OF EXHAUST FANS, MOTOR, AND DUCTING

Code 983 requests that a certified ventilation technician report to the specified site, remediate the exhaust stack, fan assembly, motor assembly, and the supply duct as specified herein. C983 also requests that the technician certify that the aforementioned equipment is safe for disassembly and removal.

CONTRACTOR RESPONSIBILITY:

· The Technical Point of Contact will provide information in regards to a specified crane vendor. Schedule a date and coordinate to work with the crane vendor to perform the work of this Statement of Work.

· Upon arriving at Norfolk Naval Shipyard, the Technical Point of Contact will provide an escort.

· Ensure that implementation of appropriate Hazardous Energy Controls is established prior to commencing work.

· Conduct a preliminary washdown of perchloric acid hoods FH-5 and FH-6 and the corresponding exhaust ventilation systems as necessary. Remove and dispose of any hazardous material from preliminary washdown.

· Disassemble, inspect, and remediate perchloric acid residue from the vertical exhaust stacks connected to exhaust fan assemblies EF-6 and EF-7. Coordinate disassembly efforts with the specified crane vendor.

· Inspect and remediate perchloric acid residue from the exhaust fan assemblies EF-6 and EF-7.

· Inspect and remediate perchloric acid residue from the motor assemblies which service exhaust fans EF-6 and EF-7.

· Inspect and remediate perchloric acid residue from the interior portion of the exhaust ducts least one (1) foot into the ducting system starting from where the ducting connects to the exhaust fans assemblies EF-6 and EF-7.

· Notify C983 if necessary repairs become manifest which exceed the scope of this Statement of Work.

QUALITY ASSURANCE:

· The contractor service technician who performs maintenance on the system shall be trained and be a subject matter expert on performing remediation of perchloric acid ventilation systems.

TESTING:

· Contractor shall test the fume hoods FH-6 and FH-7, the ventilation ducting that services both fume hoods, the exhaust fan assemblies EF-6 and EF-7, the motor assemblies of each exhaust fan, and the exhaust stacks attached to both EF-6 and EF-7 as necessary to ensure that explosive hazards are completely eliminated.

CERTIFICATION OF WORK REQUIREMENTS:

· Contractor shall certify that the vertical exhaust stacks, fan assemblies, and fan motors are safe to be properly disassembled and removed from NNSY. The exhaust ducts connected to the fan assemblies shall also be certified safe to perform disassembly of the fan assemblies.

PERFORMANCE PART II: LIFTING AND HANDLING OPERATIONS

Code 983 requests that a qualified lifting and handling contractor report to the specified site and perform lift and handling operations to replace the existing exhaust fans and motors which service the two perchloric acid fume hoods in Building 184 with new exhaust fans and motors acceptable for perchloric acid testing.

LIFTING AND HANDLING SPECIFICATIONS:

· Provide lifting and handling capacity for an exhaust stack weighing 200lb.

· Provide lifting and handling capacity for and fan and motor assembly weighing 500lb.

CONTRACTOR RESPONSIBILITY:

· Contractor must provide perform operations in accordance with the requirements of NAVSHIPYDNORINST 11262.7B, which includes providing lifting sketches of all lifts.

· The first part of this operation involves the remediation of the exhaust ventilation systems.

· Upon arriving at Norfolk Naval Shipyard, The Technical Point of Contact will provide an escort to show the contractor where each facility is located.

· The qualified lifting and handling contractor will perform a lift of the existing exhaust stacks on top of Exhaust Fan 6 and Exhaust Fan 7 in coordination with remediation specialists. Exhaust stacks will be stored on the roof of Building 184.

· The second part of this operation involves the replacement of the two existing exhaust fans and motors which service the two perchloric acid fume hoods with new exhaust fans and motors acceptable for perchloric acid testing.

· The qualified lifting and handling contractor, in coordination with the fan installation specialist, will perform a lift of the existing exhaust fan and motors from the roof of Building 184 to the street level.

· The lifting and handling contractor, in coordination with the fan installation specialist, will perform a lift of the new exhaust fans and motors from the street level to their assembly foundations on the roof of Building 184.

· The lifting and handling contractor, in coordination with the fan installation specialist, will then perform a lift of the exhaust ventilation stacks and then place the stacks onto to their mounting positions on the new fan assemblies.

· The contractor who performs lifting and handling of ventilation equipment shall be trained and be a subject matter expert on lifting and handling.

· Notify C983 if necessary operations exceed the scope of this Statement of Work.

PERFORMANCE PART III: INSTALLATION OF NEW EXHAUST FANS FOR DEDICATED PERCHLORIC ACID FUME HOODS IN BUILDING 184 AND REMOVAL OF EXISTING EXHAUST FANS

Code 983 requests that a certified ventilation technician report to the specified site, replace the two exhaust fans and motors which service the two perchloric acid fume hoods with new exhaust fans and motors acceptable for perchloric acid testing, and whatever other materials/equipment necessary to ensure the proper functioning of the fume hood ventilation systems. C983 also requests that the technician extend a ventilation stack for the plumbing system which is located adjacent to the air intake of AHU 5. This ventilation stack has been found to provide an exhaust path for perchloric acid fumes and must to be extended to prevent perchloric fumes from re-entering the air intake of the AHU.

CONTRACTOR RESPONSIBILITY:

· Upon arriving at Norfolk Naval Shipyard, The Technical Point of Contact will provide an escort to show the contractor where each facility is located.

· Ensure appropriate Hazardous Energy Controls are established prior to commencing work.

· Disassemble and inspect exhaust fan assemblies EF-6 and EF-7.

· Notify Code 983 after fan assembly disassembly to allow inspection of exhaust duct interior.

· Carefully remove existing exhaust fan assemblies EF-6 and EF-7.

· Transport existing exhaust fan assemblies to ground area outside of Building 184.

· Surrender the existing exhaust fan assemblies to NNSY for disposal.

· Transport new fan assemblies EF-6 and EF-7 to the roof of Building 184.

· Install new fan assemblies EF-6 and EF-7.

· Replace fan boots, gaskets, and connections as necessary to restore the exhaust ventilation to normal working condition.

· Use existing support brackets for the installation of the new exhaust fans and motors. If the installation of new equipment is not possible under these conditions, stop work and contact Cezar Jackson, C983, 757-284-6506.

· Contractor shall existing NNSY electrical utility lines to the new exhaust fans and power on both exhaust fans.

· Ensure that new fan assemblies are connected to and integrated with the existing Seimens controls system for perchloric acid fume hoods.

· Verify that variable fume hood sash height controls fan motor speed.

· Extend the ventilation stack for the plumbing system which is located adjacent to the air intake of AHU 5 five (5) feet beyond the current height. Provide sufficient support for the ventilation stack. Do not install new support brackets or cables directly onto the roof surface of Building 184.

· The contractor service technician who performs maintenance on the system shall be trained and be a subject matter expert on ventilation system repair, installation, and maintenance and have applicable manufacturer’s design, installation, and maintenance manuals and service bulletins for the new exhaust fans and any other equipment permanently installed.

· Notify C983 if necessary repairs exceed the scope of this Statement of Work.

TESTING:

· Contractor shall ensure that fan speed can be adjusted by the hood sash controllers in a way such that opening the sash increases the fan speed and lowering the sash decreases fan speed.

· Perform a smoke test of the fume hood ventilation systems. Ensure that no leaks are present in either system. Perform corrective repairs as necessary to eliminate all leaks. Ensure that Code 983 personnel are notified and present during the smoke test.

CERTIFICATION OF WORK REQUIREMENTS: Certify the fume hood ventilation characteristics such as CFM and face velocity meet the ventilation requirements of ANSI/AIHA Z9.5, and the American Conference of Governmental Industrial Hygienists Manual, p. 10-42.

CONTRACTING OPTIONS:

· Upon completion of the installation of the exhaust fan assemblies, the Contract Administrative Officer shall have the option to either issue a modification to the existing order to cover the repair phase or negotiate the requirements as a new procurement unless it is not considered feasible to effect the repairs.

· The Repair report and quote shall contain the following minimum information:

· Labor involved to include man hours required and hourly labor rate by labor category.

· If material is involved, specify the material as follows: noun name, description, quantity, unit price, and total amount per line item of material.

· Total estimated cost.

APPLICABLE DOCUMENTS:

· All work shall be accomplished using the commercial practices and current acceptable industry standards. The applicable references and standards invoked will vary within individual tasks and will be specifically called out in each task order.

SAFETY OR SECURITY:.

· Contractor will need and Personal Protective Equipment. "Per FAR 22.102-1(a) entitled "Safety", Contractors are hereby informed that their employees or representatives present on property under Norfolk Naval Shipyard cognizance must follow Federal and State OSHA requirements and Norfolk Naval Shipyard OSHE Program Manual, NAVSHIPYDNORINST P5090.2 requirements or safety requirements for site specific location of the contract."

· The following documents are to be used as guidance. Unless otherwise specified, the document’s effective date of issue is the date on the request for proposal:

· OSHA Standards Occupational Safety and Health Act, Standard 29 CFR 1910 (general), 1915 (shipyard), 1926 (construction).

· Per FAR 22.102-1(a) entitled "Safety", Contractors are hereby informed that their employees or representatives present on property under Norfolk Naval Shipyard cognizance must follow Federal and State OSHA requirements OSHE OSHECM Chapter Hazardous Energy Control (HEC) requirements or safety requirements for site specific location of the contract.

· Contractors and Non-NNSY Government Agencies (NNGAs) are hereby informed that their employees or representatives present on property under Norfolk Naval Shipyard (NNSY) cognizance must adhere to Federal OSHA requirements for hazardous energy control IAW 29 CFR 1915.89 and must follow Hazardous Energy Control (HEC) procedures as identified in NAVSEA’s Occupational Safety, Health, and Environment Corporate Manual (OSHECM) Chapter 250 (latest revision), when performing work under NNSY contract.

· All HEC work to be performed by Contractors and NNGAs requires that NNSY Technical Points of Contact (TPOCs) and/or Contracting Officer’s Representatives (CORs) be notified of the HEC scope of work prior to starting work.

· Any changes or deviations in the initial scope of HEC work requires the NNSY TPOCs and/or CORs be informed of the change/deviation.

· Appendix 250.B-1 through B-3 of OSHECM Chapter 250 for multiple employer work identifies when Contractors and NNGAs are required to assign their Lockout/Tags-Plus Coordinator (LOTC) to coordinate HEC work with the cognizant NNSY LOTC.

· HEC locks shall be provided by the contractor or NNGA for their employees use.

· The HEC locks shall have red bodies with name labels or name tags affixed, identifying who installed the HEC lock(s) and a point of contact telephone number.

· HEC lock name labels and tags must be made of materials that will hold up to the environment to which they are exposed.

· HEC tags used for Tags-Plus HEC work shall be provided by the cognizant NNSY LOTC to the contractor or NNGA for their use if machinery, equipment, or systems (MES) cannot be locked out.

· OSHECM Chapter 250 Tags-Plus procedures will be strictly followed.

Critical time Constraints: Work is at a stop with existing machines.

GOVERNMENT POINT(S) OF CONTRACT:

TO BE NAMED AT TIME OF AWARD.

Additional Information

The contractor shall report ALL contractor labor hours (including subcontractor labor hours) required for performance of services provided under this contract for the Replacement of Fan Assemblies via a secure data collection site. The contractor is required to completely fill in all required data fields using the following web address: https://doncmra.nmci.navy.mil Reporting inputs will be for the labor executed during the period of performance during each Government Fiscal Year, (FY), which runs October 1 through September 30. While inputs may be reported any time during the FY, all data shall be reported no later than Oct 31 of each calendar year. Contractors may direct questions to the help desk, linked at: https://doncmra.nmci.navy.mil

SAFETY

"Per FAR 22.102-1(a) entitled "Safety", Contractors are hereby informed that their employees or representatives present on property under Norfolk Naval Shipyard cognizance must follow Federal and State OSHA requirements and Norfolk Naval Shipyard OSHE Program Manual, NAVSHIPYDNORINST P5090.2 requirements or safety requirements for site specific location of the contract.

a. Contractors and Non-NNSY Government Agencies (NNGAs) are hereby informed that their employees or representatives present on property under Norfolk Naval Shipyard (NNSY) cognizance must adhere to Federal OSHA requirements for hazardous energy control IAW 29 CFR 1915.89 and must follow Hazardous Energy Control (HEC) procedures as identified in NAVSEA’s Occupational Safety, Health, and Environment Corporate Manual (OSHECM) Chapter 250 (latest revision), when performing work under NNSY contract. All HEC work to be performed by Contractors and NNGAs requires that NNSY Technical Points of Contact (TPOCs) and/or Contracting Officer’s Representatives (CORs) be notified of the HEC scope of work prior to starting work. Any changes or deviations in the initial scope of HEC work requires the NNSY TPOCs and/or CORs be informed of the change/deviation. Appendix 250.B-1 through B-3 of OSHECM Chapter 250 for multiple employer work identifies when Contractors and NNGAs are required to assign their Lockout/Tags-Plus Coordinator (LOTC) to coordinate HEC work with the cognizant NNSY LOTC. HEC locks shall be provided by the contractor or NNGA for their employees use. The HEC locks shall have red bodies with name labels or name tags affixed, identifying who installed the HEC lock(s) and a point of contact telephone number. HEC lock name lables and tags must be made of materials that will hold up to the environment to which they are exposed. HEC tags used for Tags-Plus HEC work shall be provided by the cognizant NNSY LOTC to the contractor or NNGA for their use if machinery, equipment, or systems (MES) cannot be locked out. OSHECM Chapter 250 Tags-Plus procedures will be strictly followed.

b. Contractors and NNGA’s may obtain electronic copies of OSHECM Chapter 250 (latest revision) and access the OSHA 1915.89 web site by using the following link to NNSY’s public access web site: http://www.navsea.navy.mil/shipyards/norfolk/default.aspx

c. Names and contact information for NNSY LOTCs and/or the Facility Custodian will be provided by NNSY TPOC and/or CORs set forth elsewhere in this award document.”

Contract POC

On Any Problems Concerning The Order, Please Contact Contract Specialist, Chad Godwin, Code 410, NAVSEA Contracting Department, Bldg. 1500, 2nd Floor, Portsmouth, VA 23709-5000, Telephone: (757) 396-8277.

IMPORTANT NOTE: In the event that service(s) cannot be accomplished as currently described within this PWS, the contractor MUST immediately notify the Contracting Officer, in writing, of the circumstances preventing successful completion. Failure to do so may alleviate the Government for payment of charges deemed to be outside of the scope of contract.

REQUIREMENTS FOR ACCESS TO NAVY INSTALLATIONS

Commander, Navy Installations Command (CNIC), has established the Navy Commercial Access Control System (NCACS), a standardized process for granting unescorted access privileges to vendors, contractors, suppliers and service providers not otherwise entitled to the issuance of a Common Access Card (CAC) who seek access to and can provide justification to enter Navy installations and facilities. Visiting vendors may obtain daily passes directly from the individual Navy Installations by submitting identification credentials for verification and undergoing a criminal screening/ background check. Alternatively, if the vendor so chooses, it may voluntarily elect to obtain long-term credentials through enrollment, registration, background vetting, screening, issuance of credentials, and electronic validation of credentials at its own cost through a designated independent contractor NCACS service provider. Credentials will be issued every five years and access privileges will be reviewed/renewed on an annual basis. The costs incurred to obtain Navy Installation access of any kind are not reimbursable, and the price(s) paid for obtaining long-term NCACS credentials will not be approved as a direct cost of this contract. Further information regarding NCACS can be found at http://cnic.navy.mil/CNIC_HQ_Site/index.htm (under "Popular Links").

Contractor Unclassified Access to Federally Controlled Facilities, Sensitive Information, Information Technology (IT) Systems or Protected Health Information (July 2013)

Homeland Security Presidential Directive (HSPD)-12, requires government agencies to develop and implement Federal security standards for Federal employees and contractors. The Deputy Secretary of Defense Directive-Type Memorandum (DTM) 08-006 – “DoD Implementation of Homeland Security Presidential Directive – 12 (HSPD-12)” dated November 26, 2008 (or its subsequent DoD instruction) directs implementation of HSPD-12. This clause is in accordance with HSPD-12 and its implementing directives.

APPLICABILITY

This clause applies to contractor employees requiring physical access to any area of a federally controlled base, facility or activity and/or requiring access to a DoN or DoD computer/network/system to perform certain unclassified sensitive duties. This clause also applies to contractor employees who access Privacy Act and Protected Health Information, provide support associated with fiduciary duties, or perform duties that have been identified by DON as National Security Position, as advised by the command security manager. It is the responsibility of the responsible security officer of the command/facility where the work is performed to ensure compliance.

Each contractor employee providing services at a Navy Command under this contract is required to obtain a Department of Defense Common Access Card (DoD CAC). Additionally, depending on the level of computer/network access, the contract employee will require a successful investigation as detailed below.

ACCESS TO FEDERAL FACILITIES

Per HSPD-12 and implementing guidance, all contractor employees working at a federally controlled base, facility or activity under this clause will require a DoD CAC. When access to a base, facility or activity is required contractor employees shall in-process with the Navy Command’s Security Manager upon arrival to the Navy Command and shall out-process prior to their departure at the completion of the individual’s performance under the contract.

ACCESS TO DOD IT SYSTEMS

In accordance with SECNAV M-5510.30, contractor employees who require access to DoN or DoD networks are categorized as IT-I, IT-II, or IT-III. The IT-II level, defined in detail in SECNAV M-5510.30, includes positions which require access to information protected under the Privacy Act, to include Protected Health Information (PHI). All contractor employees under this contract who require access to Privacy Act protected information are therefore categorized no lower than IT-II. IT Levels are determined by the requiring activity’s Command Information Assurance Manager. Contractor employees requiring privileged or IT-I level access, (when specified by the terms of the contract) require a Single Scope Background Investigation (SSBI) which is a higher level investigation than the National Agency Check with Law and Credit (NACLC) described below. Due to the privileged system access, a SSBI suitable for High Risk public trusts positions is required. Individuals who have access to system control, monitoring, or administration functions (e.g. system administrator, database administrator) require training and certification to Information Assurance Technical Level 1, and must be trained and certified on the Operating System or Computing Environment they are required to maintain.

Access to sensitive IT systems is contingent upon a favorably adjudicated background investigation. When access to IT systems is required for performance of the contractor employee’s duties, such employees shall in-process with the Navy Command’s Security Manager and Information Assurance Manager upon arrival to the Navy command and shall out-process prior to their departure at the completion of the individual’s performance under the contract. Completion and approval of a System Authorization Access Request Navy (SAAR-N) form is required for all individuals accessing Navy Information Technology resources. The decision to authorize access to a government IT system/network is inherently governmental. The contractor supervisor is not authorized to sign the SAAR-N; therefore, the government employee with knowledge of the system/network access required or the COR shall sign the SAAR-N as the “supervisor”.

The SAAR-N shall be forwarded to the Navy Command’s Security Manager at least 30 days prior to the individual’s start date. Failure to provide the required documentation at least 30 days prior to the individual’s start date may result in delaying the individual’s start date.

When required to maintain access to required IT systems or networks, the contractor shall ensure that all employees requiring access complete annual Information Assurance (IA) training, and maintain a current requisite background investigation. The Contractor’s Security Representative shall contact the Command Security Manager for guidance when reinvestigations are required.

INTERIM ACCESS

The Navy Command's Security Manager may authorize issuance of a DoD CAC and interim access to a DoN or DoD unclassified computer/network upon a favorable review of the investigative questionnaire and advance favorable fingerprint results. When the results of the investigation are received and a favorable determination is not made, the contractor employee working on the contract under interim access will be denied access to the computer network and this denial will not relieve the contractor of his/her responsibility to perform.

DENIAL OR TERMINATION OF ACCESS

The potential consequences of any requirement under this clause including denial or termination of physical or system access in no way relieves the contractor from the requirement to execute performance under the contract within the timeframes specified in the contract. Contractors shall plan ahead in processing their employees and subcontractor employees. The contractor shall insert this clause in all subcontracts when the subcontractor is permitted to have unclassified access to a federally controlled facility, federally-controlled information system/network and/or to government information, meaning information not authorized for public release.

CONTRACTOR’S SECURITY REPRESENTATIVE

The contractor shall designate an employee to serve as the Contractor’s Security Representative. Within three work days after contract award, the contractor shall provide to the requiring activity’s Security Manager and the Contracting Officer, in writing, the name, title, address and phone number for the Contractor’s Security Representative. The Contractor’s Security Representative shall be the primary point of contact on any security matter. The Contractor’s Security Representative shall not be replaced or removed without prior notice to the Contracting Officer and Command Security Manager.

BACKGROUND INVESTIGATION REQUIREMENTS AND SECURITY APPROVAL PROCESS FOR CONTRACTORS ASSIGNED TO NATIONAL SECURITY POSITIONS OR PERFORMING SENSITIVE DUTIES

Navy security policy requires that all positions be given a sensitivity value based on level of risk factors to ensure appropriate protective measures are applied. Navy recognizes contractor employees under this contract as Non-Critical Sensitive [ADP/IT-II] when the contract scope of work require physical access to a federally controlled base, facility or activity and/or requiring access to a DoD computer/network, to perform unclassified sensitive duties. This designation is also applied to contractor employees who access Privacy Act and Protected Health Information (PHI), provide support associated with fiduciary duties, or perform duties that have been identified by DON as National Security Positions. At a minimum, each contractor employee must be a US citizen and have a favorably completed NACLC to obtain a favorable determination for assignment to a non-critical sensitive or IT-II position. The NACLC consists of a standard NAC and a FBI fingerprint check plus law enforcement checks and credit check. Each contractor employee filling a non-critical sensitive or IT-II position is required to complete:

· SF-86 Questionnaire for National Security Positions (or equivalent OPM investigative product)

· Two FD-258 Applicant Fingerprint Cards (or an electronic fingerprint submission)

· Original Signed Release Statements

Failure to provide the required documentation at least 30 days prior to the individual’s start date shall result in delaying the individual’s start date. Background investigations shall be reinitiated as required to ensure investigations remain current (not older than 10 years) throughout the contract performance period. The Contractor’s Security Representative shall contact the Command Security Manager for guidance when reinvestigations are required.

Regardless of their duties or IT access requirements ALL contractor employees shall in-process with the Navy Command’s Security Manager upon arrival to the Navy command and shall out-process prior to their departure at the completion of the individual’s performance under the contract. Employees requiring IT access shall also check-in and check-out with the Navy Command’s Information Assurance Manager. Completion and approval of a System Authorization Access Request Navy (SAAR-N) form is required for all individuals accessing Navy Information Technology resources. The SAAR-N shall be forwarded to the Navy Command’s Security Manager at least 30 days prior to the individual’s start date. Failure to provide the required documentation at least 30 days prior to the individual’s start date shall result in delaying the individual’s start date.

The contractor shall ensure that each contract employee requiring access to IT systems or networks complete annual Information Assurance (IA) training, and maintain a current requisite background investigation. Contractor employees shall accurately complete the required investigative forms prior to submission to the Navy Command Security Manager. The Navy Command’s Security Manager will review the submitted documentation for completeness prior to submitting it to the Office of Personnel Management (OPM). Suitability/security issues identified by the Navy may render the contractor employee ineligible for the assignment. An unfavorable determination made by the Navy is final (subject to SF-86 appeal procedures) and such a determination does not relieve the contractor from meeting any contractual obligation under the contract. The Navy Command’s Security Manager will forward the required forms to OPM for processing. Once the investigation is complete, the results will be forwarded by OPM to the DON Central Adjudication Facility (CAF) for a determination.

If the contractor employee already possesses a current favorably adjudicated investigation, the contractor shall submit a Visit Authorization Request (VAR) via the Joint Personnel Adjudication System (JPAS) or a hard copy VAR directly from the contractor’s Security Representative. Although the contractor will take JPAS “Owning” role over the contractor employee, the Navy Command will take JPAS "Servicing" role over the contractor employee during the hiring process and for the duration of assignment under that contract. The contractor shall include the IT Position Category per SECNAV M-5510.30 for each employee designated on a VAR. The VAR requires annual renewal for the duration of the employee’s performance under the contract.

BACKGROUND INVESTIGATION REQUIREMENTS AND SECURITY APPROVAL PROCESS FOR CONTRACTORS ASSIGNED TO OR PERFORMING NON-SENSITIVE DUTIES

Contractor employee whose work is unclassified and non-sensitive (e.g., performing certain duties such as lawn maintenance, vendor services, etc ...) and who require physical access to publicly accessible areas to perform those duties shall meet the following minimum requirements:

· Must be either a US citizen or a US permanent resident with a minimum of 3 years legal residency in the United States (as required by The Deputy Secretary of Defense DTM 08-006 or its subsequent DoD instruction) and

· Must have a favorably completed National Agency Check with Written Inquiries (NACI) including a FBI fingerprint check prior to installation access.

To be considered for a favorable trustworthiness determination, the Contractor’s Security Representative must submit for all employees each of the following:

· SF-85 Questionnaire for Non-Sensitive Positions

· Two FD-258 Applicant Fingerprint Cards (or an electronic fingerprint submission)

· Original Signed Release Statements

The contractor shall ensure each individual employee has a current favorably completed National Agency Check with Written Inquiries (NACI) or ensure successful FBI fingerprint results have been gained and investigation has been processed with OPM

Failure to provide the required documentation at least 30 days prior to the individual’s start date may result in delaying the individual’s start date.

* Consult with your Command Security Manager and Information Assurance Manager for local policy when IT-III (non-sensitive) access is required for non-US citizens outside the United States.

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLAUSES INCORPORATED BY REFERENCE

52.204-2

52.204-3 Security Requirements

Taxpayer Identification

AUG 1996

OCT 1998

52.211-15

52.212-1

52.212-4 Defense Priority and Allocation Requirements

Instructions to Offerors – Commercial Items

Contract Terms and Conditions – Commercial Items

APR 2008

OCT 2015

MAY 2015

52.223-2

52.232-1

52.232-39 Affirmative Procurement of Biobased Products Under Service and Construction Contracts

Payments

Unenforceability of Unauthorized Obligations

SEP 2013

APR 1984

JUN 2013

252.203-7995 (DEV.)

252.204-7003

252.204-7004 Alt. A Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements Control Of Government Personnel Work Product

System for Award Management Alternate A

NOV 2016

APR 1992

FEB 2014

252.204-7005

252.204-7009

252.204-7012 Oral Attestation of Security Responsibilities

Limitations on the Use or Disclosure of Third-Party Contractor Reported Cyber Incident Information Safeguarding Covered Defense Information and Cyber Incident Reporting.

NOV 2001

OCT 2016

252.204-7015

252.211-7003 Disclosure of Information to Litigation Support Contractors

Item Unique Identification and Valuation

MAY 2016

MAR 2016

252.246-7007

252.246-7008

252.247-7023 Contractor Counterfeit Electronic Part Detection and Avoidance System

Sources of Electronic Parts

Transportation of Supplies by Sea

AUG 2016

APR 2014

CLAUSES INCORPORATED BY FULL TEXT

52.209-11 REPRESENTATION by Corporations Regarding Delinquent Tax Liability or a

Felony Conviction under any Federal Law (FEB 2016)

(a) As required by sections 744 and 745 of Division E of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235), and similar provisions, if contained in subsequent appropriations acts, the Government will not enter into a contract with any corporation that--

(1) Has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, where the awarding agency is aware of the unpaid tax liability, unless an agency has considered suspension or debarment of the corporation and made a determination that suspension or debarment is not necessary to protect the interests of the Government; or

(2) Was convicted of a felony criminal violation under any Federal law within the preceding 24 months, where the awarding agency is aware of the conviction, unless an agency has considered suspension or debarment of the corporation and made a determination that this action is not necessary to protect the interests of the Government.

(b) The Offeror represents that--

(1) It is [ ] is not [ ] a corporation that has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability; and

(2) It is [ ] is not [ ] a corporation that was convicted of a felony criminal violation under a Federal law within the preceding 24 months.

(End of provision)

52.212-2 EVALUATION--COMMERCIAL ITEMS (OCT 2014)

The Government will conduct a lowest price technically acceptable source selection process using the policies and procedures of FAR Subpart 12.6, Streamlined Procedures for Evaluation and Solicitation for Commercial Items. This acquisition process will be used in the evaluation and award of the contract.

(a) The Government will award a contract resulting from this solicitation to the responsible vendor whose quote conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate quotations:

· Technical Submission (Technical Capability Certifications Chart per Attachment 1)

· Price

Award(s) will be made for the technically acceptable item or combination of technically acceptable items that result in the lowest aggregate price to the Government.

The quoted prices of all technically acceptable items will be evaluated and the Contracting Officer shall assume, for the purpose f making multiple awards, that $500 would be the administrative cost to the Government for issuing and administering each contract award under this Request For Quotation.

Technical Acceptability: Will be determined by reviewing the technical capability certifications chart (per Attachment 1) submitted for each item (or specification) to ensure that all of the technical requirements identified are met. Technical acceptability will be defined as follows:

Technical Ratings

Failure to meet any technical requirement for an item (or specification) will make the quotation unacceptable for that item (or that specification).

If an item (or specification) is technically unacceptable, its price will not be considered for award.

Price:

The estimated amount for each line item will be added together to determine the total estimated price which will become the evaluated price.

The vendor’s proposed price will be evaluated on the basis of price reasonableness. All prices must be considered fair and reasonable as determined by the Government. Price quote shall be held firm for sixty (60) days.

(End of provision)

52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS--COMMERCIAL ITEMS (APR 2016)

The Offeror shall complete only paragraph (b) of this provision if the Offeror has completed the annual representations and certification electronically via the System for Award Management (SAM) Web site accessed through http://www.acquisition.gov. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (r) of this provision.

(a) Definitions. As used in this provision --

“Economically disadvantaged women-owned small business (EDWOSB) Concern” means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business eligible under the WOSB Program.

"Forced or indentured child labor" means all work or service-

(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or

(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.

Highest-level owner means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.

Immediate owner means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: Ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.

Inverted domestic corporation means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c).

Manufactured end product means any end product in product and service codes (PSCs) 1000-9999, except--

(1) PSC 5510, Lumber and Related Basic Wood Materials;

(2) Product or Service Group (PSG) 87, Agricultural Supplies;

(3) PSG 88, Live Animals;

(4) PSG 89, Subsistence;

(5) PSC 9410, Crude Grades of Plant Materials;

(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) PSC 9610, Ores;

(9) PSC 9620, Minerals, Natural and Synthetic; and

(10) PSC 9630, Additive Metal Materials.

Place of manufacture means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

Predecessor means an entity that is replaced by a successor and includes any predecessors of the predecessor.

Restricted business operations means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate--

(1) Are conducted under contract directly and exclusively with the regional government of southern Sudan;

(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization;

(3) Consist of providing goods or services to marginalized populations of Sudan;

(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;

(5) Consist of providing goods or services that are used only to promote health or education; or

(6) Have been voluntarily suspended.

Sensitive technology--

(1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically--

(i) To restrict the free flow of unbiased information in Iran; or

(ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and

(2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)).

Service-disabled veteran-owned small business concern--

(1) Means a small business concern--

(i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and

(ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran.

(2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16).

"Small business concern" means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR Part 121 and size standards in this solicitation.

Small disadvantaged business concern, consistent with 13 CFR 124.1002, means a small business concern under the size standard applicable to the acquisition, that--

(1) Is at least 51 percent unconditionally and directly owned (as defined at 13 CFR 124.105) by--

(i) One or more socially disadvantaged (as defined at 13 CFR 124.103) and economically disadvantaged (as defined at 13 CFR 124.104) individuals who are citizens of the United States; and

(ii) Each individual claiming economic disadvantage has a net worth not exceeding $750,000 after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2); and

(2) The management and daily business operations of which are controlled (as defined at 13.CFR 124.106) by individuals, who meet the criteria in paragraphs (1)(i) and (ii) of this definition.

Subsidiary means an entity in which more than 50 percent of the entity is owned--

(1) Directly by a parent corporation; or

(2) Through another subsidiary of a parent corporation.

Successor means an entity that has replaced a predecessor by acquiring the assets and carrying out the affairs of the predecessor under a new name (often through acquisition or merger). The term

“successor” does not include new offices/divisions of the same company or a company that only changes its name. The extent of the responsibility of the successor for the liabilities of the predecessor may vary, depending on State law and specific circumstances.

Veteran-owned small business concern means a small business concern--

(1) Not less than 51 percent of which is owned by one or more veterans (as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and

(2) The management and daily business operations of which are controlled by one or more veterans.

"Women-owned business concern" means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and whose management and daily business operations are controlled by one or more women.

"Women-owned small business concern" means a small business concern--

(1) That is at least 51 percent owned by one or more women or, in the case of any publicly owned business, at least 51 percent of its stock is owned by one or more women; or

(2) Whose management and daily business operations are controlled by one or more women.

Women-owned small business (WOSB) concern eligible under the WOSB Program (in accordance with 13 CFR part 127)”, means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States.

(b) (1) Annual Representations and Certifications. Any changes provided by the offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications posted electronically on the SAM website.

(2) The offeror has completed the annual representations and certifications electronically via the SAM website accessed through https://www.acquisition.gov. After reviewing the SAM database information, the offeror verifies by submission of this offer that the representations and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications--Commercial Items, have been entered or updated in the last 12 months, are…