Brand__Name__Gages_Redacted.pdf

JUSTIFICATION FOR BRAND NAME MANDATORY (Simplified Acquisitions <$250K)

The service or material listed on <91288288> is brand name mandatory and competition is precluded for reasons indicated below. There are no substitutes available for this material or service.

Restricted to the following source. Provide original manufacturer's name. (If manufacturer distributes via dealers, ALSO provide dealer information.)

Manufacturer: ASHCROFT INC.

Manufacturer POC & phone number: Matthew Kennedy (203) 385-0303

Mfr. Address: 250 East Main St Stratford, CT 06614-5145

Dealer I Rep: ASHCRFOT INC Matthew Kennedy (203) 385-0303 or Procurement at (203) 385-0240; or ANDRUSS-PESKIN CORP (508) 351-6200; or MMC METROLOGY LAB, INC.

(800) 288-1662

Dealer I Rep address I phone number: see above

X Description of the item or service required, the estimated cost, and required delivery date.

0-5000psig 8.5" HEISE gauge Qty 8

X Specific characteristics of the material or service that limit the availability to brand name mandatory (unique features, function of the item, etc.).

BRAND NAME MANDATORY: REQUIRED SPECIFIC MANUFACTURER MODEL CC

OR CM AS SPECIFIED ON THE TECHNICAL CONTRACT ATTACHMENT IS REQUIRED

DUE TO NUCLEAR TEST EQUIPMENT CATALOG (NTEC), NA VSEA TECHNICAL

MANUAL AND NA VSEA CORPORATE TEST EQUIPMENT STANDARDIZATION

EFFORT REQUIREMENTS. THIS EQUIPMENT IS USED IN NUCLEAR

CONTAMINATED APPLICATIONS AND REQUIRES RESOURCE CONSERVATION

RECOVERY ACT (RCRA) COMPLIANCE IN ADDITION TO VENDOR SPECIFIC

COMPATIBILITY WARRANTEES.

_ The requested material or service represents the minimum requirements of the government.

1 of2

CHECK & FILL IN ALL APPLICABLE BLANKS BELOW

_The material/service must be compatible in all aspects (form, fit and function) with existing systems presently installed/performing. Describe the equipment/function you have now and how the new item/service must coordinate, connect, or interface with the existing system.

_ A patent, copyright or proprietary data limits competition. The proprietary data is _____ _

.X These are "direct replacements" parts/components for existing equipment.

_ Other information to support a sole source buy:

I CERTIFY THAT STATEMENTS CHECKED, AND INFORMATION PROVIDED ABOVE, ARE

COMPLETE AND CORRECT TO THE BEST OF MY KNOWLEDGE. I UNDERSTAND THAT THE

PROCESSING OF THIS SOLE SOURCE JUSTIFICATION PRECLUDES THE USE OF FULL AND

OPEN COMPETITION.

Signature: Isl Title: Nuclear Engineer

Activity: PNS Code 2305.3 Date: 05/09/2019

--------------------------------------------~~----12-·----------------------------------------------------------------

Contracting Officer Signature -1-t i.....,,,.,__""-------------- Date & b D It q /

SAPBNM I I

2 of2

The service or material listed on <91288289> is brand name mandatory and competition is precluded for reasons indicated below. There are no substitutes available for this material or service.

Restricted to the following source. Provide original manufacturer's name. (If manufacturer distributes via dealers, ALSO provide dealer information.)

Manufacturer: ASHCROFT INC.

Manufacturer POC & phone number: Matthew Kennedy (203) 385-0303

Mfr. Address: 250 East Main St Stratford, CT 06614-5145

Dealer I Rep: ASHCRFOT INC Matthew Kennedy (203) 385-0303 or Procurement at (203) 385-0240; or ANDRUSS-PESKIN CORP (508) 351-6200; or MMC METROLOGY LAB, INC.

(800) 288-1662

Dealer I Rep address I phone number: see above

.X Description of the item or service required, the estimated cost, and required delivery date.

0-2000psig 8.5'' HEISE gauge Qty3 Est $7,902.63

.X Specific characteristics of the material or service that limit the availability to brand name mandatory (unique features, function of the item, etc.).

BRAND NAME MANDATORY: REQUIRED SPECIFIC MANUFACTURER MODEL CC

OR CM AS SPECIFIED ON THE TECHNICAL CONTRACT ATTACHMENT IS REQUIRED

DUE TO NUCLEAR TEST EQUIPMENT CATALOG (NTEC), NA VSEA TECHNICAL

MANUAL AND NA VSEA CORPORA TE TEST EQUIPMENT STANDARDIZATION

EFFORT REQUIREMENTS. THIS EQUIPMENT IS USED IN NUCLEAR

CONTAMINATED APPLICATIONS AND REQUIRES RESOURCE CONSERVATION

RECOVERY ACT (RCRA) COMPLIANCE IN ADDITION TO VENDOR SPECIFIC

COMPATIBILITY WARRANTEES.

1 of2

The material/service must be compatible in all aspects (form, fit and function) with existing systems presently installed/performing. Describe the equipment/function you have now and how the new item/service must coordinate, connect, or interface with the existing system.

_ A patent, copyright or proprietary data limits competition. The proprietary data is _____ _

.X These are "direct replacements" parts/components for existing equipment.

_ Other information to support a sole source buy:

I CERTIFY THAT STATEMENTS CHECKED, AND INFORMATION PROVIDED ABOVE, ARE

COMPLETE AND CORRECT TO THE BEST OF MY KNOWLEDGE. I UNDERSTAND THAT THE

PROCESSING OF THIS SOLE SOURCE JUSTIFICATION PRECLUDES THE USE OF FULL AND

OPEN COMPETITION.

Signature: Isl Matthew D Godfrey Title: Nuclear Engineer

Activity: PNS Code 2305.3 Date: 05/09/2019

The service or material listed on <91288290> is brand name mandatory and competition is precluded for reasons indicated below. There are no substitutes available for this material or service.

Restricted to the following source. Provide original manufacturer's name. (If manufacturer distributes via dealers, ALSO provide dealer information.)

Manufacturer: ASHCROFT INC.

Manufacturer POC & phone number: Matthew Kennedy (203) 385-0303

Mfr. Address: 250 East Main St Stratford, CT 06614-5145

Dealer I Rep: ASHCRFOT INC Matthew Kennedy (203) 385-0303 or Procurement at (203) 385-0240; or ANDRUSS-PESKIN CORP (508) 351-6200; or MMC METROLOGY LAB, INC.

(800) 288-1662

Dealer I Rep address I phone number: see above

X Description of the item or service required, the estimated cost, and required delivery date.

0-1500psig 8.5'' HEISE gauge Qty4 Est $11,120.00

X Specific characteristics of the material or service that limit the availability to brand name mandatory (unique features, function of the item, etc.).

BRAND NAME MANDATORY: REQUIRED SPECIFIC MANUFACTURER MODEL CM

AS SPECIFIED ON THE TECHNICAL CONTRACT ATTACHMENT IS REQUIRED DUE

TO NUCLEAR TEST EQUIPMENT CATALOG (NTEC), NAVSEA TECHNICAL MANUAL

AND NAVSEA CORPORATE TEST EQUIPMENT STANDARDIZATION EFFORT

REQUIREMENTS. THIS EQUIPMENT IS USED IN NUCLEAR CONTAMINATED

APPLICATIONS AND REQUIRES RESOURCE CONSERVATION RECOVERY ACT

(RCRA) COMPLIANCE IN ADDITION TO VENDOR SPECIFIC COMPATIBILITY

WARRANTEES.

I of2

_The material/service must be compatible in all aspects (form, fit and function) with existing systems presently installed/performing. Describe the equipment/function you have now and how the new item/service must coordinate, connect, or interface with the existing system.

_ A patent, copyright or proprietary data limits competition. The proprietary data is _____ _

X These are "direct replacements" parts/components for existing equipment.

_Other information to support a sole source buy:

I CERTIFY THAT STATEMENTS CHECKED, AND INFORMATION PROVIDED ABOVE, ARE

COMPLETE AND CORRECT TO THE BEST OF MY KNOWLEDGE. I UNDERSTAND THAT THE

PROCESSING OF THIS SOLE SOURCE JUSTIFICATION PRECLUDES THE USE OF FULL AND

OPEN COMPETITION.

Signature: Isl Matthew D Godfrey Title: Nuclear Engineer

Activity: PNS Code 2305.3 Date: 05/09/2019

------------------------------------------uw------------ ------------------------------------------------------------------

Contracting Officer Signature

Date Co\ \\)'w

SAPBNM \ ~