N3904018Q0123_RFQ-A01.pdf

N0010418RX19778

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this modification is to revise Attachment 1. All other terms and conditions remain the same.

1. CONTRACT ID CODE PAGE OF PAGES

1 2

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 21-Feb-2018

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X N3904018Q0123

X 9B. DATED (SEE ITEM 11)

08-Feb-2018

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

21-Feb-2018

CODE

PORTSMOUTH NAVAL SHIPYARD

CODE 410

KITTERY ME 03904

N39040 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

miles.beaudoin@navy.milEMAIL:207-438-3881TEL:

MILES A BEAUDOIN / CONTRACTING OFFICER

N3904018Q0123

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION A - SOLICITATION/CONTRACT FORM

The required response date/time has changed from 22-Feb-2018 05:00 PM to 28-Feb-2018 05:00 PM.

SECTION J - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS

The Table of Contents has changed from:

Exhibit/Attachment Table of Contents

DOCUMENT TYPE DESCRIPTION PAGES DATE

Attachment 1 Attachment 1 3 02-FEB-2018 Attachment 2 Exhibit A 5 02-FEB-2018 Attachment 3 Attachment 1 to Exhibit A 3 02-FEB-2018 to:

Exhibit/Attachment Table of Contents

DOCUMENT TYPE DESCRIPTION PAGES DATE

Attachment 2 Exhibit A 5 02-FEB-2018 Attachment 3 Attachment 1 to Exhibit A 3 02-FEB-2018 Attachment 4 Attachment 1 Rev 1 3 16-FEB-2018

(End of Summary of Changes)

PRINTED 1/16/2018

4710 ALTN9A1

ITEM NO.

an

SECTION B

STOCK NUMBER

4710-01-016-6321

CONTRACT

ATIACHMENT ___ ~~-\

ITEM NAME TUBE, CRES. 304, SEAMLESS, CLASS IV TUBE

SPECIAL CHARACTERISTICS

PAGE ( of3

TUBE PER MIL-DTL-23226, COMP 304, CLASS IV. DIMENSIONS: ONLY TO CLASS 1.

- ~ ~ ?,ul- / ... OMltJAI! TUBE SIZE~ (ACTUAL O.D. - 0.375", MINIMUM WALL - 0.125" )

• ~~11' 'L TI ··~>/l:r.-----------------------

C DESCRIPTION/SPECIFICATIONS

C.1 MANUFACTURE PER MIL-SPEC MIL-DTL-23226H, PARAGRAPH 6.2 (ORDERING DATA):

(A) "TUBE AND PIPE, CORROSION RESISTANT STEEL, SEAMLESS (UNS S30400, S30403,

S30400/S30403, S31600/S31603, S31703, S34700, AND S34800)", MIL-DTL-23226H OF 8 AUGUST 2016.

(B) COMPOSITION 3Q4, CLASS, SIZE, WALL THICKNESS, AND QUANTITY SHALL BE AS SPECIFIED IN

SECTION B OF THIS SCHEDULE. TYPE 2 OR 3 IS ACCEPTABLE.

(C) FINISH (A), (B), (C), or (E)

(D) NOT APPLICABLE.

(E) NOT APPLICABLE.

(F) FOR CLASS IV PIPE WITH CLASS 1 DIMENSIONS, SEE SECTION B OF

THIS SCHEDULE. ADD SCHEDULE 140 COLUMN TO TABLE VI OF

MIL-DTL-23226H FOR 8" NPS AS FOLLOWS: 7.001" l.D., .812" WALL

THICKNESS.

(G) INSIDE DIAMETER TOLERANCES APPLY FOR NOMINAL PIPE SIZES 1/2"

THRU 2" IN LIEU OF OUTSIDE DIAMETER TOLERANCES.

(H) CLASS IV LENGTHS PER PARAGRAPH 3.3.3.4 OF MIL-DTL-23226H.

EXCEPT MAXIMUM LENGTHS OF 20 FEET IN LIEU OF 24 FEET ARE PREFERABLE.

(I) NOT APPLICABLE.

(J) TRANSVERSE PROPERTIES ARE REQUIRED ON PIPE 8 INCHES AND LARGER IN DIAMETER.

(K) MICROCLEANLINESS IS REQUIRED FOR TYPE 2 OR 3 PIPE.

(L) MATERIAL MARKING REQUIREMENTS OF SECTION 3.9 OF MIL-DTL-23226H AND THE

REQUIREMENTS OF C.4 BELOW.

(M) NOT APPLICABLE.

(N) MIL-STD-2132E IS THE REQUIRED REVISION FOR PERFORMANCE OF NON DESTRUCTIVE TESTING.

C.1.1 SUPLEMENTARY TECHNICAL REQUIREMENTS (STR) 505 REVISION 3 IS INVOKED. STR-505

CAN BE OBTAINED FROM PORTSMOUTH NAVAL SHIPYARD UPON REQUEST.

C.2 THE CONTRACTOR SHALL NOTIFY PORTSMOUTH NAVAL SHIPYARD FOUR (4) WEEKS

IN ADVANCE OF ULTRASONIC TESTING TO ALLOW PARTICIPATION BY SHIP-

YARD PERSONNEL IN WITHNESSING UT TESTS. NOTIFY

CODE T.~LEPHONE (207) 438-___ _

C.3 DATA REQUIREMENTS:

C.3.1 MATERIAL CE~TIFICATION, SEE EXHIBIT A, SEQUENCE A001

CONTRACT

PRINTED 1/16/2018

ATTACHMENT \ ~V

4710 ALTN9A1

C.3.2 PROCEDURES (U.T.), SEE EXHIBIT A, SEQUENCE A002

C.3.3 PROCEDURES (ALLOY IDENT.), SEE EXHIBIT A, SEQUENCE A003

C.3.4 PROCEDURES (HEAT TREATMENT), SEE EXHIBIT A, SEQUENCE A004

C.3.5 PROCEDURES (LIQUID PENETRANT), SEE EXHIBIT A, SEQUENCE A005

C.4 MATERIAL MARKING

1. EACH PIECE OF MATERIAL SHALL BE PERMANENTLY MARKED AT EACH

END WITH THE INFORMATION OF (A), (B), (C) , AND (D) BELOW USING

THE PERMANENT MARKING METHODS OF MIL-STD-792F

OR THE PERMANENT MARKING METHOD SPECIFIED IN THE MATERIAL

SPECIFICATION.

(A) "SAE"

(B) VENDOR TRACEABILITY NUMBER TRACEABLE TO ALL MANUFACTURE

TEST AND INSPECTION INFORMATION AND TO A UNIQUE SET OF

PHYSICAL, MECHANICAL, AND CHEMICAL TEST RESULTS WHICH REPRESENT

THE MATERIAL USED TO MAKE THE PIECE.

(C) THE MANUFACTURER'S NAME, TRADE-MARK OR SYMBOL.

(D) THE INFORMATION REQUIRED BY THE SPECIFICATION IN ADDITION TO THAT REQUIRED BY (A), (B), (C), AND (D) ABOVE SHALL BE MARKED EITHER PER THE SPECIFICATION OR PER

PERMANENT MARKING METHODS OF MIL-STD-792F. MATERIAL DESIGNATOR LISTED IN THE

SPECIFICATION NEED NOT BE MARKED ON MATERIAL IF IT IS DIFFERENT FROM THAT SPECIFIED

BY (A) ABOVE.

2. IF ANY MARKING SPECIFIED ABOVE CANNOT BE APPLIED DUE TO

SPACE LIMITATION, A WAIVER REQUEST SHALL BE SUBMITTED.

C.5 C528 SPECIFICATION CHANGES

C.6 C500 MERCURY CONTROL

C.7 ALL TESTING CALLED OUT IN MIL-DTL-23226H AND THIS SCHEDULE ARE SUBJECT TO WITNESSING BY

THE AUTHORIZED REPRESENTATIVE AT CONTRACTOR'S EXPENSE.

D PRESERVATION/PACfSAGING/PACKING

D.1 PACKING REQUIREMENTS: PARAGRAPH 5.2 OF MIL-DTL-23226H

APPLIES. IN ADDITION, MATERIAL SHALL BE SHIPPED IN WOODEN BOXES.

' E INSPECTION ACCEPTANCE

E.1 EB INSPECTION AND ACCEPTANCE (SPECIAL QC ITEMS)

E.2 E506 HIGHER-LEVEL CONTRACT QUALITY REQUIREMENTS

(MIL-1-45208 OR MIL-0-9858 OR ISO 9001/9002 WITH STR-ISO 9000 SUPPLEMENT A OR B OR C)

E.3 G504 DCMC APPROVAL OF NONCONFORMING MATERIAL-WITHHELD

E.4 G505 VENDOR DISPOSITION OF NONCONFORMING MATERIAL

E.5 FAR 52.246-2 INSPECTION OF SUPPLIES-FIXED-PRICE (AUG 1996)

H SPECIAL PROVISIONS

SEE BASIC PART OF CONTRACT FOR APPLICABILITY

K Section

CONTRACT

PRINTED

ATIACHMENT ~\( \ PAGE -8o:f3 1/16/2018

4710 ALTN9A1

L Section

SEE BASIC PART OF CONTRACT FOR APPLICABILITY

M Section

SEE BASIC PART OF CONTRACT FOR APPLICABILITY