2.02_Solicitation.pdf

CODE

(Hour)

PAGE(S)

until 12:00 PM local time 02 Mar 2017

X

A X B X C

D

EX

X G F 28 - 37

38 - 40 X H lee.thomas1@navy.mil

RATING PAGE OF PAGES

7. ISSUED BY

(Date)

IMPORTANT - Award will be made on this Form, or on Standard Form 26, or by other authorized official written notice.

Previous Edition is Unusable 33-134 STANDARD FORM 33 (REV. 9-97)

Prescribed by GSA FAR (48 CFR) 53.214(c)

1 40

(If other than Item 7)

15A. NAME 16. NAME AND TITLE OF PERSON AUTHORIZED TO

AND

ADDRESS

SIGN OFFER (Type or print)

OF

OFFEROR

AMENDMENT NO. DATE

15B. TELEPHONE NO (Include area code) 17. SIGNATURE15C. CHECK IF REMITTANCE ADDRESS

IS DIFFERENT FROM ABOVE - ENTER

SUCH ADDRESS IN SCHEDULE.

18. OFFER DATE

1. THIS CONTRACT IS A RATED ORDER

UNDER DPAS (15 CFR 700)

2. CONTRACT NO.

N00604 8. ADDRESS OFFER TO

See Item 7

9. Sealed offers in original and 1 copies for furnishing the supplies or services in the Schedule will be received at the place specified in Item 8, or if handcarried, in the depository located in

CAUTION - LATE Submissions, Modifications, and Withdrawals: See Section L, Provision No. 52.214-7 or 52.215-1. All offers are subject to all terms and conditions contained in this solicitation.

10. FOR INFORMATION

CALL:

A. NAME (NO COLLECT CALLS)

LEE F. THOMAS 808-473-7532

11. TABLE OF CONTENTS

SOLICITATION/ CONTRACT FORM

SUPPLIES OR SERVICES AND PRICES/ COSTS

X I CONTRACT CLAUSES

DESCRIPTION/ SPECS./ WORK STATEMENT

PACKAGING AND MARKING

3 - 5 J LIST OF ATTACHMENTS

INSPECTION AND ACCEPTANCE

DELIVERIES OR PERFORMANCE

X K

REPRESENTATIONS, CERTIFICATIONS AND

OTHER STATEMENTS OF OFFERORS

CONTRACT ADMINISTRATION DATA 8 - 10 X

SPECIAL CONTRACT REQUIREMENTS

OFFER (Must be fully completed by offeror) 11 - 23 M

L INSTRS., CONDS., AND NOTICES TO OFFERORS

EVALUATION FACTORS FOR AWARD

NOTE: Item 12 does not apply if the solicitation includes the provisions at 52.214-16, Minimum Bid Acceptance Period.

is inserted by the offeror) from the date for receipt of offers specified above, to furnish any or all items upon which prices are offered at the price set opposite each item, delivered at the designated point(s), within the time specified in the schedule.

13. DISCOUNT FOR PROMPT PAYMENT

(See Section I, Clause No. 52.232-8)

14. ACKNOWLEDGMENT OF AMENDMENTS

(The offeror acknowledges receipt of amendments

AMENDMENT NO. DATE

to the SOLICITATION for offerors and related documents numbered and dated):

FACILITY

12. In compliance with the above, the undersigned agrees, if this offer is accepted within calendar days (60 calendar days unless a different period

SOLICITATION, OFFER AND AWARD

X

(X) SEC. DESCRIPTION (X) SEC. DESCRIPTION PAGE(S)

PART I - THE SCHEDULE

26. NAME OF CONTRACTING OFFICER (Type or print) 27. UNITED STATES OF AMERICA 28. AWARD DATE

EMAIL:TEL: (Signature of Contracting Officer)

CODE CODE

B. TELEPHONE (Include area code) C. E-MAIL ADDRESS

AWARD (To be completed by Government)

19. ACCEPTED AS TO ITEMS NUMBERED 20. AMOUNT 21. ACCOUNTING AND APPROPRIATION

22. AUTHORITY FOR USING OTHER THAN FULL AND OPEN COMPETITION:

10 U.S.C. 2304(c)( ) 41 U.S.C. 253(c)( ) (4 copies unless otherwise specified)

23. SUBMIT INVOICES TO ADDRESS SHOWN IN ITEM

24. ADMINISTERED BY (If other than Item 7) CODE 25. PAYMENT WILL BE MADE BY CODE

PART IV - REPRESENTATIONS AND INSTRUCTIONS

PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS

24 - 27

PART II - CONTRACT CLAUSES

NAVSUP FLC PEARL HARBOR

1942 GAFFNEY ST

STE 100

ATTN: LEE THOMAS

PEARL HARBOR HI 96860

808-473-7532

808-473-0811FAX:

TEL:

FAX:

TEL:

NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid" and "bidder".

SOLICITATION

6. REQUISITION/PURCHASE NO.

N3225317RC12601

5. DATE ISSUED

03 Feb 2017

4. TYPE OF SOLICITATION

SEALED BID (IFB)

NEGOTIATED (RFP)

[ X ]

3. SOLICITATION NO.

N00604-17-R-3006

Section B - Supplies or Services and Prices

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Group RDM Refurbishment SVC USS North Carolina

FFP

RDM Refurbishment Services for USS North Carolina per the enclosed PWS FOB: Destination

MILSTRIP: N3225317RC12601

PURCHASE REQUEST NUMBER: N3225317RC12601

NET AMT

Section C - Descriptions and Specifications

PERFORMANCE WORK STATEMENT

PERFORMANCE WORK STATEMENT (PWS)

PEARL HARBOR NAVAL SHIPYARD & INTERMEDIATE MAINTENANCE FACILITY

(PHNSY & IMF)

USS NORTH CAROLINA (SSN 777) EXTENDED DRY-DOCKING SELECTED RESTRICTED

AVAILABILITY (EDSRA) SECONDARY PROPULSION SYSTEM (SPS)

ROTATIONAL DEPLOYMENT MECHANISM (RDM) REFURBISHMENT

1.0 BACKGROUND

1.1 The Virginia Class submarine USS North Carolina (SSN-777) has one (1) Secondary Propulsion System (SPS). The SPS consists of a Secondary Propulsion Unit (SPU) and a Rotational Deployment Mechanism (RDM). The RDM enables the SPU to deploy, train, and retract. An RDM hydraulic motor drives the training motion of the SPU.

1.2 Pearl Harbor Naval Shipyard requires refurbishment services, composed of repair and modification services, from the Original Equipment Manufacturer (OEM) Curtiss-Wright Electro Mechanical Division (EMD) for the SPS RDM. The SPS RDM will be removed from USS North Carolina (SSN-

777) during the upcoming Extended Dry-docking Selected Restricted Availability (EDSRA).

2.0 OBJECTIVE AND SCOPE

2.1 Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility (PHNSY&IMF) requires Curtiss- Wright EMD to perform refurbishment of the SPS RDM removed from the USS North Carolina (SSN- 777). Curtiss-Wright EMD shall inspect, repair, and test the SPS RDM, including the Training Motor and Rotary Joint using Submarine Maintenance Standard (SMS) 2380-081-029 Rev A Chg 4 as a guide. If there is any deviation in parts during inspection from the original drawings, Curtiss-Wright EMD shall immediately notify Pearl Harbor Naval Shipyard’s points of contacts listed in paragraph 11.0.

2.2 All deviation requests submitted will have an estimated 24 hour turnaround. All deviation requests submitted will be submitted to the SSN 777, USS North Carolina personnel listed below as found in paragraph 11.0 for review. Approval/denial of all requests will come from the personnel listed in paragraph 11.0. Any requests that result in a material change to the contract shall require written approval from the Contracting Officer.

3.0 PERFORMANCE REQUIREMENTS

3.1 The Contractor shall perform RDM refurbishment in accordance with 3.1.1 - 3.1.4.

3.1.1 The contractor shall submit the initial RDM Refurbishment Repair Procedure to the

Technical Point of Contract (TPOC) for review prior to performing refurbishment.

3.1.2 The contractor shall replace RDM components per RDM Refurbishment Repair

Procedure. The replacement components were provided on material contract SPMYM4- 15-M-0960.

3.1.3 The contractor shall provide monthly status reports on the progress of the work to the Technical Point of Contact (TPOC).

3.1.4 The contractor shall provide a detailed final report on the summary of the refurbishment of the RDM as required within fifteen (15) calendar days after shipping of RDM.

3.2 The Contractor shall perform a thrust collar full machining option per Vendor Drawing 4D98024G01.

This is needed to ensure the hydraulic motor thrust collar slot lines up sufficiently with the driving flange slot at reassembly.

4.0 CONTRACTOR SUPPORT

4.1 Contractor shall provide engineering support as necessary to analyze mechanical issues experienced by the RDM, determine root cause(s), and identify corrective actions to resolve issues.

4.2 Contractor shall provide manufacturing and test support services to refurbish the RDM per paragraph 3.1.

4.3 Contractor shall provide manufacturing and production support services to troubleshoot the RDM.

5.0 DELIVERABLES

5.1 The Contractor shall provide the following types of deliverables as specified in the contract:

5.1.1 The reports, tests, and reviews shall be provided in an electronic medium (Microsoft

Word, Access, Excel, or Adobe Acrobat).

5.1.2 The Contractor shall notify the TPOC immediately upon any inspection findings that indicate out of scope of work.

5.1.3 All submittals and deliverables requiring correction shall be corrected and resubmitted by the Contractor within fifteen (15) working days of receipt of Government comments.

The Government has fifteen (15) working days to return comments to the Contractor. If further comments are required, both the Contractor and the Government shall continue to reply within ten (10) working days.

6.0 SERVICE DELIVERY SUMMARY

Performance Objective Frequency PWS Paragraph Performance Threshold RDM Refurbishment Repair

Procedure One Time 3.1.1 98% delivery and compliance

Replace RDM Components Monthly 3.1.2 98% delivery and compliance Monthly Status Report Monthly 3.1.3 98% delivery and compliance

Perform Thrust Collar Full Machining

One Time 3.2 98% delivery and compliance

Final Refurbishment Repair Report

Upon completion of services

3.1.4 98% delivery and compliance

7.0 QUALITY ASSURANCE

The Contractor is responsible for implementing and maintaining a Quality Control Plan (QCP) to ensure that the work performed meets or exceeds contract requirements and results in the correction of potential and actual problems. The QCP shall be implemented on the first day of contract performance. In addition to the contractor’s QCP, the Government will provide the Contractor with a copy of the Government’s Quality Assurance Surveillance Program (QASP). The Government’s QASP addresses what will be reviewed and will outline actions to be taken by the Contractor, should reviews and/or inspection identify areas requiring remedial action.

8.0 GOVERNMENT FURNISHED PROPERTY AND SERVICES

The parts required for the refurbishment service, purchased under contract SPMYM4-15-M-0960 are located at the Contractor’s facility referenced in 9.0. The Government will provide the RDM and the Linear Variable Differential Transformer (LVDT). PHNSY & IMF shall be responsible for the shipment of the RDM and the LVDT to the Contractor’s facility. The Contractor shall be responsible for shipment of the RDM and LVDT to Portsmouth Naval Shipyard upon completion in an OEM RDM shipping container (Tool P/N 56-08105).

The specific location will be in Section F of the award.

9.0 PLACE OF PERFORMANCE

Contractor’s facility:

Curtiss-Wright EMD 1000 Wright Way Cheswick, PA 15024

10.0 REFERENCES

10.1 Submarine Maintenance Standard 2380-081-029 Rev A , Chg 4

10.2 NAVSEA S9238-AF-MMA-010 325 HP Secondary Propulsion System, Model P/5-4025-A1, Operation and Maintenance Manual Rev 00, Chg B

10.3 Westinghouse Government Services DWG 4D98024G01

11.0 POINTS OF CONTACT

11.1 Technical Point of Contact: David-Matthew Ogata USS North Carolina Project Shafting Engineer, 808-473-8000 x2516, email: david-matthew.ogata@navy.mil

12.0 ENTERPRISE-WIDE CONTRACTOR MANPOWER REPORTING APPLICATION

12.1 The contractor shall report ALL contractor labor hours (including subcontractor labor hours) required for performance of services provided under this contract for the PHNSY & IMF via a secure data collection site. Contracted services excluded from reporting are based on Product Services Codes (PSCs). The Excluded PSCs are:

(1) W, Lease/Rental of Equipment;

(2) X, Lease/Rental of Facilities;

(3) Y, Construction of Structures and Facilities;

(4) D, Automatic Data Processing and Telecommunications, IT and Telcom- Telecommunications Transmission (D304) and Internet (D322) ONLY;

(5) S, Utilities ONLY;

(6) V, Freight and Shipping ONLY.

12.2 The contractor is required to completely fill in all required data fields using the following web address:

https://doncmra.nmci.navy.mil .

12.3 Reporting inputs will be for the labor executed during the period of performance during each Government fiscal year (FY), which runs October 1 through September 30. While inputs may be reported any time during the FY, all data shall be reported no later than October 31 of each calendar year. Contractors may direct questions to the help desk, linked at https://doncmra.nmci.navy.mil.

13.0 PERIOD OF PERFORMANCE

March 2017 – September 2017

Section E - Inspection and Acceptance

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government Destination Government

CLAUSES INCORPORATED BY REFERENCE

52.246-4 Inspection Of Services--Fixed Price AUG 1996

Section F - Deliveries or Performance

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC

0001 POP 13-MAR-2017 TO

12-SEP-2017

N/A N/A

FOB: Destination

52.242-15 Stop-Work Order AUG 1989 52.247-34 F.O.B. Destination NOV 1991

Section G - Contract Administration Data

252.232-7003 Electronic Submission of Payment Requests and Receiving

Reports

JUN 2012

CLAUSES INCORPORATED BY FULL TEXT

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (MAY 2013)

(a) Definitions. As used in this clause--

Department of Defense Activity Address Code (DoDAAC) is a six position code that uniquely identifies a unit, activity, or organization.

Document type means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

Local processing office (LPO) is the office responsible for payment certification when payment certification is done external to the entitlement system.

(b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall--

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.acquisition.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this Web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/.

(e) WAWF methods of document submission. Document submissions may be via Web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order:

(1) Document type. The Contractor shall use the following document type(s).

TBD

(Contracting Officer: Insert applicable document type(s). Note: If a “Combo” document type is identified but not supportable by the Contractor's business systems, an “Invoice” (stand-alone) and “Receiving Report” (stand-alone) document type may be used instead.)

(2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer.

TBD

(Contracting Officer: Insert inspection and acceptance locations or “Not applicable”.)

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table* Field Name in WAWF Data to be entered in WAWF Pay Official DoDAAC TBD Issue By DoDAAC TBD Admin DoDAAC TBD Inspect By DoDAAC TBD Ship To Code TBD Ship From Code TBD Mark For Code TBD Service Approver (DoDAAC) TBD Service Acceptor (DoDAAC) TBD Accept at Other DoDAAC TBD LPO DoDAAC TBD DCAA Auditor DoDAAC TBD Other DoDAAC(s) TBD

(*Contracting Officer: Insert applicable DoDAAC information or “See schedule” if multiple ship to/acceptance locations apply, or “Not applicable.”)

(4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g. timesheets) in support of each payment request.

(5) WAWF email notifications. The Contractor shall enter the email address identified below in the “Send Additional Email Notifications” field of WAWF once a document is submitted in the system.

TBD

(Contracting Officer: Insert applicable email addresses or “Not applicable.”)

(g) WAWF point of contact. (1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

TBD

(Contracting Officer: Insert applicable information or “Not applicable.”)

(2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988.

(End of clause)

Section H - Special Contract Requirements

WAGE DETERMINATION

WD 15-4235 (Rev.-3) was first posted on www.wdol.gov on 01/03/2017

REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2015-4235

Daniel W. Simms Division of | Revision No.: 3

Director Wage Determinations| Date Of Revision: 12/30/2016

Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.20 for calendar year 2017 applies to all contracts subject to the Service Contract

Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.20 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year 2017. The EO minimum wage rate will be adjusted annually.

Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

State: Pennsylvania

Area: Pennsylvania Counties of Allegheny, Armstrong, Beaver, Butler, Fayette, Washington, Westmoreland

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations

01011 - Accounting Clerk I 14.66

01012 - Accounting Clerk II 16.92

01013 - Accounting Clerk III 20.33

01020 - Administrative Assistant 23.22

01035 - Court Reporter 17.78

01041 - Customer Service Representative I 12.12

01042 - Customer Service Representative II 13.63

01043 - Customer Service Representative III 14.86

01051 - Data Entry Operator I 12.17

01052 - Data Entry Operator II 13.81

01060 - Dispatcher, Motor Vehicle 17.99

01070 - Document Preparation Clerk 12.44

01090 - Duplicating Machine Operator 12.44

01111 - General Clerk I 12.39

01112 - General Clerk II 14.59

01113 - General Clerk III 16.37

01120 - Housing Referral Assistant 19.31

01141 - Messenger Courier 11.46

01191 - Order Clerk I 13.17

01192 - Order Clerk II 15.74

01261 - Personnel Assistant (Employment) I 16.18

01262 - Personnel Assistant (Employment) II 18.09

01263 - Personnel Assistant (Employment) III 20.18

01270 - Production Control Clerk 22.20

01290 - Rental Clerk 15.53

01300 - Scheduler, Maintenance 15.48

01311 - Secretary I 15.48

01312 - Secretary II 17.32

01313 - Secretary III 19.31

01320 - Service Order Dispatcher 17.00

01410 - Supply Technician 23.22

01420 - Survey Worker 15.04

01460 - Switchboard Operator/Receptionist 12.34

01531 - Travel Clerk I 12.61

01532 - Travel Clerk II 13.54

01533 - Travel Clerk III 14.52

01611 - Word Processor I 12.90

01612 - Word Processor II 15.53

01613 - Word Processor III 17.37

05000 - Automotive Service Occupations

05005 - Automobile Body Repairer, Fiberglass 19.43

05010 - Automotive Electrician 17.78

05040 - Automotive Glass Installer 17.10

05070 - Automotive Worker 17.10

05110 - Mobile Equipment Servicer 15.85

05130 - Motor Equipment Metal Mechanic 18.70

05160 - Motor Equipment Metal Worker 17.10

05190 - Motor Vehicle Mechanic 18.70

05220 - Motor Vehicle Mechanic Helper 15.23

05250 - Motor Vehicle Upholstery Worker 16.47

05280 - Motor Vehicle Wrecker 17.10

05310 - Painter, Automotive 19.03

05340 - Radiator Repair Specialist 17.10

05370 - Tire Repairer 13.96

05400 - Transmission Repair Specialist 18.70

07000 - Food Preparation And Service Occupations

07010 - Baker 12.08

07041 - Cook I 11.62

07042 - Cook II 13.07

07070 - Dishwasher 9.05

07130 - Food Service Worker 9.49

07210 - Meat Cutter 15.05

07260 - Waiter/Waitress 8.99

09000 - Furniture Maintenance And Repair Occupations

09010 - Electrostatic Spray Painter 16.22

09040 - Furniture Handler 12.62

09080 - Furniture Refinisher 17.27

09090 - Furniture Refinisher Helper 13.89

09110 - Furniture Repairer, Minor 15.47

09130 - Upholsterer 16.22

11000 - General Services And Support Occupations

11030 - Cleaner, Vehicles 9.50

11060 - Elevator Operator 12.12

11090 - Gardener 14.44

11122 - Housekeeping Aide 13.61

11150 - Janitor 13.61

11210 - Laborer, Grounds Maintenance 12.35

11240 - Maid or Houseman 11.50

11260 - Pruner 12.96

11270 - Tractor Operator 13.53

11330 - Trail Maintenance Worker 12.35

11360 - Window Cleaner 13.78

12000 - Health Occupations

12010 - Ambulance Driver 14.98

12011 - Breath Alcohol Technician 17.33

12012 - Certified Occupational Therapist Assistant 22.87

12015 - Certified Physical Therapist Assistant 20.77

12020 - Dental Assistant 15.41

12025 - Dental Hygienist 25.31

12030 - EKG Technician 22.90

12035 - Electroneurodiagnostic Technologist 22.90

12040 - Emergency Medical Technician 14.98

12071 - Licensed Practical Nurse I 16.25

12072 - Licensed Practical Nurse II 18.17

12073 - Licensed Practical Nurse III 20.26

12100 - Medical Assistant 13.34

12130 - Medical Laboratory Technician 17.30

12160 - Medical Record Clerk 15.54

12190 - Medical Record Technician 17.64

12195 - Medical Transcriptionist 15.69

12210 - Nuclear Medicine Technologist 27.35

12221 - Nursing Assistant I 10.73

12222 - Nursing Assistant II 12.07

12223 - Nursing Assistant III 13.16

12224 - Nursing Assistant IV 14.78

12235 - Optical Dispenser 15.28

12236 - Optical Technician 13.78

12250 - Pharmacy Technician 13.63

12280 - Phlebotomist 14.44

12305 - Radiologic Technologist 23.28

12311 - Registered Nurse I 23.50

12312 - Registered Nurse II 28.75

12313 - Registered Nurse II, Specialist 28.75

12314 - Registered Nurse III 34.78

12315 - Registered Nurse III, Anesthetist 34.78

12316 - Registered Nurse IV 41.68

12317 - Scheduler (Drug and Alcohol Testing) 21.47

12320 - Substance Abuse Treatment Counselor 17.47

13000 - Information And Arts Occupations

13011 - Exhibits Specialist I 21.25

13012 - Exhibits Specialist II 27.77

13013 - Exhibits Specialist III 29.81

13041 - Illustrator I 19.11

13042 - Illustrator II 24.36

13043 - Illustrator III 26.32

13047 - Librarian 24.59

13050 - Library Aide/Clerk 10.34

13054 - Library Information Technology Systems 21.16

Administrator

13058 - Library Technician 16.06

13061 - Media Specialist I 16.02

13062 - Media Specialist II 17.92

13063 - Media Specialist III 19.99

13071 - Photographer I 14.36

13072 - Photographer II 18.25

13073 - Photographer III 21.51

13074 - Photographer IV 25.13

13075 - Photographer V 30.38

13090 - Technical Order Library Clerk 11.48

13110 - Video Teleconference Technician 18.24

14000 - Information Technology Occupations

14041 - Computer Operator I 15.90

14042 - Computer Operator II 17.79

14043 - Computer Operator III 19.84

14044 - Computer Operator IV 22.05

14045 - Computer Operator V 24.41

14071 - Computer Programmer I (see 1) 22.35

14072 - Computer Programmer II (see 1)

14073 - Computer Programmer III (see 1)

14074 - Computer Programmer IV (see 1)

14101 - Computer Systems Analyst I (see 1)

14102 - Computer Systems Analyst II (see 1)

14103 - Computer Systems Analyst III (see 1)

14150 - Peripheral Equipment Operator 15.90

14160 - Personal Computer Support Technician 22.05

14170 - System Support Specialist 27.96

15000 - Instructional Occupations

15010 - Aircrew Training Devices Instructor (Non-Rated) 28.12

15020 - Aircrew Training Devices Instructor (Rated) 34.02

15030 - Air Crew Training Devices Instructor (Pilot) 40.78

15050 - Computer Based Training Specialist / Instructor 28.12

15060 - Educational Technologist 29.84

15070 - Flight Instructor (Pilot) 40.78

15080 - Graphic Artist 20.56

15085 - Maintenance Test Pilot, Fixed, Jet/Prop 40.78

15086 - Maintenance Test Pilot, Rotary Wing 40.78

15088 - Non-Maintenance Test/Co-Pilot 40.78

15090 - Technical Instructor 21.33

15095 - Technical Instructor/Course Developer 26.09

15110 - Test Proctor 17.22

15120 - Tutor 17.22

16000 - Laundry, Dry-Cleaning, Pressing And Related Occupations

16010 - Assembler 9.58

16030 - Counter Attendant 9.58

16040 - Dry Cleaner 11.95

16070 - Finisher, Flatwork, Machine 9.58

16090 - Presser, Hand 9.58

16110 - Presser, Machine, Drycleaning 9.58

16130 - Presser, Machine, Shirts 9.58

16160 - Presser, Machine, Wearing Apparel, Laundry 9.58

16190 - Sewing Machine Operator 12.72

16220 - Tailor 13.51

16250 - Washer, Machine 10.37

19000 - Machine Tool Operation And Repair Occupations

19010 - Machine-Tool Operator (Tool Room) 18.08

19040 - Tool And Die Maker 22.76

21000 - Materials Handling And Packing Occupations

21020 - Forklift Operator 16.80

21030 - Material Coordinator 21.96

21040 - Material Expediter 21.96

21050 - Material Handling Laborer 18.10

21071 - Order Filler 13.89

21080 - Production Line Worker (Food Processing) 16.80

21110 - Shipping Packer 14.78

21130 - Shipping/Receiving Clerk 14.78

21140 - Store Worker I 13.97

21150 - Stock Clerk 17.73

21210 - Tools And Parts Attendant 16.80

21410 - Warehouse Specialist 16.80

23000 - Mechanics And Maintenance And Repair Occupations

23010 - Aerospace Structural Welder 25.82

23019 - Aircraft Logs and Records Technician 21.76

23021 - Aircraft Mechanic I 24.79

23022 - Aircraft Mechanic II 25.82

23023 - Aircraft Mechanic III 27.05

23040 - Aircraft Mechanic Helper 19.60

23050 - Aircraft, Painter 24.30

23060 - Aircraft Servicer 21.76

23070 - Aircraft Survival Flight Equipment Technician 24.30

23080 - Aircraft Worker 23.00

23091 - Aircrew Life Support Equipment (ALSE) Mechanic 23.00

I

23092 - Aircrew Life Support Equipment (ALSE) Mechanic 24.79

II

23110 - Appliance Mechanic 19.92

23120 - Bicycle Repairer 13.96

23125 - Cable Splicer 29.67

23130 - Carpenter, Maintenance 21.56

23140 - Carpet Layer 19.73

23160 - Electrician, Maintenance 24.24

23181 - Electronics Technician Maintenance I 22.77

23182 - Electronics Technician Maintenance II 24.00

23183 - Electronics Technician Maintenance III 25.12

23260 - Fabric Worker 21.19

23290 - Fire Alarm System Mechanic 21.02

23310 - Fire Extinguisher Repairer 19.93

23311 - Fuel Distribution System Mechanic 24.68

23312 - Fuel Distribution System Operator 20.34

23370 - General Maintenance Worker 18.17

23380 - Ground Support Equipment Mechanic 24.79

23381 - Ground Support Equipment Servicer 21.76

23382 - Ground Support Equipment Worker 23.00

23391 - Gunsmith I 19.93

23392 - Gunsmith II 22.42

23393 - Gunsmith III 24.74

23410 - Heating, Ventilation And Air-Conditioning 20.85

Mechanic

23411 - Heating, Ventilation And Air Contditioning 21.61

Mechanic (Research Facility)

23430 - Heavy Equipment Mechanic 22.43

23440 - Heavy Equipment Operator 22.48

23460 - Instrument Mechanic 25.49

23465 - Laboratory/Shelter Mechanic 23.63

23470 - Laborer 14.78

23510 - Locksmith 20.25

23530 - Machinery Maintenance Mechanic 22.56

23550 - Machinist, Maintenance 20.25

23580 - Maintenance Trades Helper 16.43

23591 - Metrology Technician I 25.49

23592 - Metrology Technician II 26.40

23593 - Metrology Technician III 27.56

23640 - Millwright 25.25

23710 - Office Appliance Repairer 19.71

23760 - Painter, Maintenance 19.35

23790 - Pipefitter, Maintenance 28.32

23810 - Plumber, Maintenance 25.25

23820 - Pneudraulic Systems Mechanic 24.74

23850 - Rigger 23.24

23870 - Scale Mechanic 22.42

23890 - Sheet-Metal Worker, Maintenance 28.36

23910 - Small Engine Mechanic 17.11

23931 - Telecommunications Mechanic I 26.90

23932 - Telecommunications Mechanic II 27.85

23950 - Telephone Lineman 25.91

23960 - Welder, Combination, Maintenance 18.79

23965 - Well Driller 21.05

23970 - Woodcraft Worker 24.74

23980 - Woodworker 17.49

24000 - Personal Needs Occupations

24550 - Case Manager 12.82

24570 - Child Care Attendant 10.71

24580 - Child Care Center Clerk 12.98

24610 - Chore Aide 10.22

24620 - Family Readiness And Support Services 12.82

Coordinator

24630 - Homemaker 13.49

25000 - Plant And System Operations Occupations

25010 - Boiler Tender 24.99

25040 - Sewage Plant Operator 22.25

25070 - Stationary Engineer 24.99

25190 - Ventilation Equipment Tender 17.79

25210 - Water Treatment Plant Operator 22.25

27000 - Protective Service Occupations

27004 - Alarm Monitor 14.84

27007 - Baggage Inspector 10.79

27008 - Corrections Officer 23.82

27010 - Court Security Officer 25.20

27030 - Detection Dog Handler 14.84

27040 - Detention Officer 23.82

27070 - Firefighter 25.23

27101 - Guard I 10.79

27102 - Guard II 14.84

27131 - Police Officer I 26.94

27132 - Police Officer II 29.62

28000 - Recreation Occupations

28041 - Carnival Equipment Operator 11.03

28042 - Carnival Equipment Repairer 11.46

28043 - Carnival Worker 9.10

28210 - Gate Attendant/Gate Tender 13.83

28310 - Lifeguard 10.94

28350 - Park Attendant (Aide) 15.47

28510 - Recreation Aide/Health Facility Attendant 11.29

28515 - Recreation Specialist 17.04

28630 - Sports Official 12.32

28690 - Swimming Pool Operator 18.27

29000 - Stevedoring/Longshoremen Occupational Services

29010 - Blocker And Bracer 21.51

29020 - Hatch Tender 21.51

29030 - Line Handler 21.51

29041 - Stevedore I 20.33

29042 - Stevedore II 22.59

30000 - Technical Occupations

30010 - Air Traffic Control Specialist, Center (HFO) (see 2) 37.20

30011 - Air Traffic Control Specialist, Station (HFO) (see 2) 25.65

30012 - Air Traffic Control Specialist, Terminal (HFO) (see 2) 28.25

30021 - Archeological Technician I 18.25

30022 - Archeological Technician II 20.11

30023 - Archeological Technician III 24.87

30030 - Cartographic Technician 25.30

30040 - Civil Engineering Technician 23.33

30051 - Cryogenic Technician I 24.17

30052 - Cryogenic Technician II 26.71

30061 - Drafter/CAD Operator I 18.25

30062 - Drafter/CAD Operator II 20.41

30063 - Drafter/CAD Operator III 22.77

30064 - Drafter/CAD Operator IV 28.00

30081 - Engineering Technician I 16.06

30082 - Engineering Technician II 18.06

30083 - Engineering Technician III 20.98

30084 - Engineering Technician IV 24.78

30085 - Engineering Technician V 30.31

30086 - Engineering Technician VI 36.67

30090 - Environmental Technician 21.50

30095 - Evidence Control Specialist 21.83

30210 - Laboratory Technician 21.12

30221 - Latent Fingerprint Technician I 24.17

30222 - Latent Fingerprint Technician II 26.70

30240 - Mathematical Technician 25.30

30361 - Paralegal/Legal Assistant I 19.93

30362 - Paralegal/Legal Assistant II 24.70

30363 - Paralegal/Legal Assistant III 30.21

30364 - Paralegal/Legal Assistant IV 33.56

30375 - Petroleum Supply Specialist 26.70

30390 - Photo-Optics Technician 26.70

30395 - Radiation Control Technician 26.70

30461 - Technical Writer I 21.84

30462 - Technical Writer II 25.69

30463 - Technical Writer III 29.66

30491 - Unexploded Ordnance (UXO) Technician I 23.64

30492 - Unexploded Ordnance (UXO) Technician II 28.60

30493 - Unexploded Ordnance (UXO) Technician III 34.28

30494 - Unexploded (UXO) Safety Escort 23.64

30495 - Unexploded (UXO) Sweep Personnel 23.64

30501 - Weather Forecaster I 24.18

30502 - Weather Forecaster II 29.41

30620 - Weather Observer, Combined Upper Air Or (see 2) 22.77

Surface Programs

30621 - Weather Observer, Senior (see 2) 25.30

31000 - Transportation/Mobile Equipment Operation Occupations

31010 - Airplane Pilot 28.60

31020 - Bus Aide 16.18

31030 - Bus Driver 20.24

31043 - Driver Courier 13.74

31260 - Parking and Lot Attendant 10.49

31290 - Shuttle Bus Driver 14.65

31310 - Taxi Driver 10.92

31361 - Truckdriver, Light 14.65

31362 - Truckdriver, Medium 17.07

31363 - Truckdriver, Heavy 19.66

31364 - Truckdriver, Tractor-Trailer 19.66

99000 - Miscellaneous Occupations

99020 - Cabin Safety Specialist 13.95

99030 - Cashier 8.90

99050 - Desk Clerk 10.19

99095 - Embalmer 25.70

99130 - Flight Follower 23.64

99251 - Laboratory Animal Caretaker I 12.22

99252 - Laboratory Animal Caretaker II 13.02

99260 - Marketing Analyst 28.96

99310 - Mortician 27.76

99410 - Pest Controller 17.04

99510 - Photofinishing Worker 13.23

99710 - Recycling Laborer 18.86

99711 - Recycling Specialist 21.71

99730 - Refuse Collector 17.42

99810 - Sales Clerk 12.12

99820 - School Crossing Guard 11.28

99830 - Survey Party Chief 20.65

99831 - Surveying Aide 12.30

99832 - Surveying Technician 18.77

99840 - Vending Machine Attendant 14.01

99841 - Vending Machine Repairer 16.78

99842 - Vending Machine Repairer Helper 14.01

Note: Executive Order (EO) 13706, Establishing Paid Sick Leave for Federal

Contractors, applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2017. If this contract is covered by the EO, the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year. Employees must be permitted to use paid sick leave for their own illness, injury or other health-related needs, including preventive care; to assist a family member (or person who is like family to the employee) who is ill, injured, or has other health-related needs, including preventive care; or for reasons resulting from, or to assist a family member (or person who is like family to the employee) who is the victim of, domestic violence, sexual assault, or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $4.27 per hour or $170.80 per week or $740.13 per month

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor, 3 weeks after 8 years, and 4 weeks after 15 years. Length of service includes the whole span of continuous service with the present contractor or successor, wherever employed, and with the predecessor contractors in the performance of similar work at the same Federal facility. (See 29 CFR 4.173)

HOLIDAYS: A minimum of ten paid holidays per year: New Year's Day, Martin Luther

King Jr.'s Birthday, Washington's Birthday, Memorial Day, Independence Day, Labor Day, Columbus Day, Veterans' Day, Thanksgiving Day, and Christmas Day. (A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4.174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING:

1) COMPUTER EMPLOYEES: Under the SCA at section 8(b), this wage determination does not apply to any employee who individually qualifies as a bona fide executive, administrative, or professional employee as defined in 29 C.F.R. Part 541. Because most Computer System Analysts and Computer Programmers who are compensated at a rate not less than $27.63 (or on a salary or fee basis at a rate not less than $455 per week) an hour would likely qualify as exempt computer professionals, (29 C.F.R. 541.

400) wage rates may not be listed on this wage determination for all occupations within those job families. In addition, because this wage determination may not list a wage rate for some or all occupations within those job families if the survey data indicates that the prevailing wage rate for the occupation equals or exceeds

$27.63 per hour conformances may be necessary for certain nonexempt employees. For example, if an individual employee is nonexempt but nevertheless performs duties within the scope of one of the Computer Systems Analyst or Computer Programmer occupations for which this wage determination does not specify an SCA wage rate, then the wage rate for that employee must be conformed in accordance with the conformance procedures described in the conformance note included on this wage determination.

Additionally, because job titles vary widely and change quickly in the computer industry, job titles are not determinative of the application of the computer professional exemption. Therefore, the exemption applies only to computer employees who satisfy the compensation requirements and whose primary duty consists of:

(1) The application of systems analysis techniques and procedures, including consulting with users, to determine hardware, software or system functional specifications;

(2) The design, development, documentation, analysis, creation, testing or modification of computer systems or programs, including prototypes, based on and related to user or system design specifications;

(3) The design, documentation, testing, creation or modification of computer programs related to machine operating systems; or

(4) A combination of the aforementioned duties, the performance of which requires the same level of skills. (29 C.F.R. 541.400).

2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY: If you work at night as part of a regular tour of duty, you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am.

If you are a full-time employed (40 hours a week) and Sunday is part of your regularly scheduled workweek, you are paid at your rate of basic pay plus a Sunday premium of 25% of your basic rate for each hour of Sunday work which is not overtime

(i.e. occasional work on Sunday outside the normal tour of duty is considered overtime work).

HAZARDOUS PAY DIFFERENTIAL: An 8 percent differential is applicable to employees employed in a position that represents a high degree of hazard when working with or in close proximity to ordnance, explosives, and incendiary materials. This includes work such as screening, blending, dying, mixing, and pressing of sensitive ordnance, explosives, and pyrotechnic compositions such as lead azide, black powder and photoflash powder. All dry-house activities involving propellants or explosives.

Demilitarization, modification, renovation, demolition, and maintenance operations on sensitive ordnance, explosives and incendiary materials. All operations involving re-grading and cleaning of artillery ranges.

A 4 percent differential is applicable to employees employed in a position that represents a low degree of hazard when working with, or in close proximity to ordnance, (or employees possibly adjacent to) explosives and incendiary materials which involves potential injury such as laceration of hands, face, or arms of the employee engaged in the operation, irritation of the skin, minor burns and the like;

minimal damage to immediate or adjacent work area or equipment being used. All operations involving, unloading, storage, and hauling of ordnance, explosive, and incendiary ordnance material other than small arms ammunition. These differentials are only applicable to work that has been specifically designated by the agency for ordnance, explosives, and incendiary material differential pay.

** UNIFORM ALLOWANCE **

If employees are required to wear uniforms in the performance of this contract

(either by the terms of the Government contract, by the employer, by the state or local law, etc.), the cost of furnishing such uniforms and maintaining (by laundering or dry cleaning) such uniforms is an expense that may not be borne by an employee where such cost reduces the hourly rate below that required by the wage determination. The Department of Labor will accept payment in accordance with the following standards as compliance:

The contractor or subcontractor is required to furnish all employees with an adequate number of uniforms without cost or to reimburse employees for the actual cost of the uniforms. In addition, where uniform cleaning and maintenance is made the responsibility of the employee, all contractors and subcontractors subject to this wage determination shall (in the absence of a bona fide collective bargaining agreement providing for a different amount, or the furnishing of contrary affirmative proof as to the actual cost), reimburse all employees for such cleaning and maintenance at a rate of $3.35 per week (or $.67 cents per day). However, in those instances where the uniforms furnished are made of "wash and wear" materials, may be routinely washed and dried with other personal garments, and do not require any special treatment such as dry cleaning, daily washing, or commercial laundering in order to meet the cleanliness or appearance standards set by the terms of the Government contract, by the contractor, by law, or by the nature of the work, there is no requirement that employees be reimbursed for uniform maintenance costs.

The duties of employees under job titles listed are those described in the

"Service Contract Act Directory of Occupations", Fifth Edition (Revision 1), dated September 2014, unless otherwise indicated.

** REQUEST FOR AUTHORIZATION OF ADDITIONAL CLASSIFICATION AND WAGE RATE, Standard

Form 1444 (SF-1444) **

Conformance Process:

The contracting officer shall require that any class of service employee which is not listed herein and which is to be employed under the contract (i.e., the work to be performed is not performed by any classification listed in the wage determination), be classified by the contractor so as to provide a reasonable relationship (i.e., appropriate level of skill comparison) between such unlisted classifications and the classifications listed in the wage determination (See 29 CFR

4.6(b)(2)(i)). Such conforming procedures shall be initiated by the contractor prior to the performance of contract work by such unlisted class(es) of employees

(See 29 CFR 4.6(b)(2)(ii)). The Wage and Hour Division shall make a final determination of conformed classification, wage rate, and/or fringe benefits which shall be paid to all employees performing in the classification from the first day of work on which contract work is performed by them in the classification. Failure to pay such unlisted employees the compensation agreed upon by the interested parties and/or fully determined by the Wage and Hour Division retroactive to the date such class of employees commenced contract work shall be a violation of the Act and this contract. (See 29 CFR 4.6(b)(2)(v)). When multiple wage determinations are included in a contract, a separate SF-1444 should be prepared for each wage determination to which a class(es) is to be conformed.

The process for preparing a conformance request is as follows:

1) When preparing the bid, the contractor identifies the need for a conformed occupation(s) and computes a proposed rate(s).

2) After contract award, the contractor prepares a written report listing in order the proposed classification title(s), a Federal grade equivalency (FGE) for each proposed classification(s), job description(s), and rationale for proposed wage rate(s), including information regarding the agreement or disagreement of the authorized representative of the employees involved, or where there is no authorized representative, the employees themselves. This report should be submitted to the contracting officer no later than 30 days after such unlisted class(es) of employees performs any contract work.

3) The contracting officer reviews the proposed action and promptly submits a report of the action, together with the agency's recommendations and pertinent information including the position of the contractor and the employees, to the U.S.

Department of Labor, Wage and Hour Division, for review (See 29 CFR 4.6(b)(2)(ii)).

4) Within 30 days of receipt, the Wage and Hour Division approves, modifies, or disapproves the action via transmittal to the agency contracting officer, or notifies the contracting officer that additional time will be required to process the request.

5) The contracting officer transmits the Wage and Hour Division's decision to the contractor.

6) Each affected employee shall be furnished by the contractor with a written copy of such determination or it shall be posted as a part of the wage determination (See

29 CFR 4.6(b)(2)(iii)).

Information required by the Regulations must be submitted on SF-1444 or bond paper.

When preparing a conformance request, the "Service Contract Act Directory of

Occupations" should be used to compare job definitions to ensure that duties requested are not performed by a classification already listed in the wage determination. Remember, it is not the job title, but the required tasks that determine whether a class is included in an established wage determination.

Conformances may not be used to artificially split, combine, or subdivide classifications listed in the wage determination (See 29 CFR 4.152(c)(1)).

Section I - Contract Clauses

52.202-1 Definitions NOV 2013 52.203-3 Gratuities APR 1984 52.203-5 Covenant Against Contingent Fees MAY 2014 52.203-6 Restrictions On Subcontractor Sales To The Government SEP 2006 52.203-7 Anti-Kickback Procedures MAY 2014 52.203-8 Cancellation, Rescission, and Recovery of Funds for Illegal or

Improper Activity

MAY 2014

52.203-10 Price Or Fee Adjustment For Illegal Or Improper Activity MAY 2014 52.203-12 Limitation On Payments To Influence Certain Federal

Transactions

OCT 2010

52.203-17 Contractor Employee Whistleblower Rights and Requirement To Inform Employees of Whistleblower Rights

APR 2014

52.204-4 Printed or Copied Double-Sided on Postconsumer Fiber Content Paper

MAY 2011

52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards

OCT 2016

52.204-13 System for Award Management Maintenance OCT 2016 52.209-6 Protecting the Government's Interest When Subcontracting

With Contractors Debarred, Suspended, or Proposed for Debarment

OCT 2015

52.209-10 Prohibition on Contracting With Inverted Domestic Corporations

NOV 2015

52.215-2 Audit and Records--Negotiation OCT 2010 52.215-8 Order of Precedence--Uniform Contract Format OCT 1997 52.215-17 Waiver of Facilities Capital Cost of Money OCT 1997 52.215-21 Requirements for Certified Cost or Pricing Data and Data

Other Than Certified Cost or Pricing Data -- Modifications

OCT 2010

52.219-8 Utilization of Small Business Concerns NOV 2016 52.219-28 Post-Award Small Business Program Rerepresentation JUL 2013 52.222-3 Convict Labor JUN 2003 52.222-19 Child Labor -- Cooperation with Authorities and Remedies OCT 2016 52.222-21 Prohibition Of Segregated Facilities APR 2015 52.222-26 Equal Opportunity SEP 2016 52.222-37 Employment Reports on Veterans FEB 2016 52.222-40 Notification of Employee Rights Under the National Labor

Relations Act

DEC 2010

52.222-41 Service Contract Labor Standards MAY 2014 52.222-44 Fair Labor Standards And Service Contract Labor Standards-

Price Adjustment

MAY 2014

52.222-50 Combating Trafficking in Persons MAR 2015 52.222-54 Employment Eligibility Verification OCT 2015 52.222-55 Minimum Wages Under Executive Order 13658 DEC 2015 52.223-6 Drug-Free Workplace MAY 2001 52.223-18 Encouraging Contractor Policies To Ban Text Messaging

While Driving

AUG 2011

52.225-13 Restrictions on Certain Foreign Purchases JUN 2008 52.227-1 Authorization and Consent DEC 2007 52.227-2 Notice And Assistance Regarding Patent And Copyright

Infringement

DEC 2007

52.229-3 Federal, State And Local Taxes FEB 2013

52.232-1 Payments APR 1984 52.232-8 Discounts For Prompt Payment FEB 2002 52.232-11 Extras APR 1984 52.232-17 Interest MAY 2014 52.232-23 Assignment Of Claims MAY 2014 52.232-25 Prompt Payment JUL 2013 52.232-33 Payment by Electronic Funds Transfer--System for Award

Management

JUL 2013

52.232-39 Unenforceability of Unauthorized Obligations JUN 2013 52.232-40 Providing Accelerated Payments to Small Business

Subcontractors

DEC 2013

52.233-1 Disputes MAY 2014 52.233-1 Alt I Disputes (May 2014) - Alternate I DEC 1991 52.233-3 Protest After Award AUG 1996 52.233-4 Applicable Law for Breach of Contract Claim OCT 2004 52.242-13 Bankruptcy JUL 1995 52.244-5 Competition In Subcontracting DEC 1996 52.244-6 Subcontracts for Commercial Items DEC 2016 52.246-25 Limitation Of Liability--Services FEB 1997 52.248-1 Value Engineering OCT 2010 52.249-2 Termination For Convenience Of The Government (Fixed-

Price)

APR 2012

52.253-1 Computer Generated Forms JAN 1991 252.203-7000 Requirements Relating to Compensation of Former DoD

Officials

SEP 2011

252.203-7001 Prohibition On Persons Convicted of Fraud or Other Defense- Contract-Related Felonies

DEC 2008

252.203-7002 Requirement to Inform Employees of Whistleblower Rights SEP 2013 252.203-7005 Representation Relating to Compensation of Former DoD

Officials

NOV 2011

252.203-7996 (Dev) Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements - Representation (Deviation 2016-O0003)

OCT 2015

252.203-7997 (Dev) Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements (Deviation 2016-O0003)

OCT 2015

252.204-7000 Disclosure Of Information OCT 2016 252.204-7003 Control Of Government Personnel Work Product APR 1992 252.204-7004 Alt A System for Award Management Alternate A FEB 2014 252.204-7007 Alternate A, Annual Representations and Certifications JAN 2015 252.204-7008 Compliance With Safeguarding Covered Defense Information

Controls

OCT 2016

252.204-7009 Limitations on the Use or Disclosure of Third-Party Contractor Reported Cyber Incident Information

OCT 2016

252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting

OCT 2016

252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support

MAY 2016

252.209-7004 Subcontracting With Firms That Are Owned or Controlled By The Government of a Country that is a State Sponsor of Terrorism

OCT 2015

252.223-7008 Prohibition of Hexavalent Chromium JUN 2013 252.225-7048 Export-Controlled Items JUN 2013 252.231-7000 Supplemental Cost Principles DEC 1991 252.232-7010 Levies on Contract Payments DEC 2006

252.237-7010 Prohibition on Interrogation of Detainees by Contractor Personnel

JUN 2013

252.243-7001 Pricing Of Contract Modifications DEC 1991 252.243-7002 Requests for Equitable Adjustment DEC 2012 252.244-7000 Subcontracts for Commercial Items JUN 2013 252.246-7003 Notification of Potential Safety Issues JUN 2013 252.247-7023 Transportation of Supplies by Sea APR 2014

52.222-35 EQUAL OPPORTUNITY FOR VETERANS (OCT 2015)

(a) Definitions. As used in this clause--

``Active duty wartime or campaign badge veteran,'' ``Armed Forces service medal veteran,'' ``disabled veteran,'' ``protected veteran,'' ``qualified disabled veteran,'' and ``recently separated veteran'' have…