N0042121Q0675-P00001 SF30.pdf

1300942012

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

To include the Statement of Work

1. CONTRACT ID CODE PAGE OF PAGES

1 4

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 17-Sep-2021

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street , County, State and Zip Code) X N0042121Q0675

X 9B. DATED (SEE ITEM 11)

17-Sep-2021

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

17-Sep-2021

CODE

NAWCAD PROCUREMENT GROUP

21983 BUNDY ROAD, BLDG 441

PATUXENT RIVER MD 20670

N00421 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

kimberly.d.abell1@navy.milEMAIL:301-342-7650TEL:

KIMBERLY D. ABELL / CONTRACT SPECIALIST

N0042121Q0675

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION C - DESCRIPTIONS AND SPECIFICATIONS

The following have been added by full text:

STATEMENT OF WORK

STATEMENT OF WORK / SPECIFICATIONS

NAVAIR PPO War Room Installation

1.0 INTRODUCTION. The Naval Air Warfare Center Aircraft Division (NAWCAD) Webster Outlying Field (WOLF) Integrated Command and Control & Intelligence (IC2&I) Division St.

Inigoes, Maryland, has been tasked by the Naval Air Systems Command (NAVAIR) Personal Property Shipping Office (PPSO) to develop and establish the Mezzanine War Room system relocation in Patuxent River Naval Air Station Building 2272. The Panel Built, Inc. brand name material will be used to create the walls for this room inside of another structure.

1.1. SCOPE. This Statement of Work (SOW) addresses the Panel Built, Inc. install of the requested equipment. The Contractor shall provide on-site support to the NAVAIR PPSO to support the installation and implementation of the requested Panel Built, Inc. equipment identified in Attachment 001.

2.0 TECHNICAL REQUIREMENTS. The IC2&I Division requires Panel Built, Inc. Class A interior sound panel walls, stamped drawings, modular wiring, twenty-four (24) space load center, a switch for individual circuits with wiring, freight to Lexington, Park MD, and installation services.

2.1. PANEL BUILT WAR ROOM INSTALLATION The Panel Built, Inc. installation of the War Room center shall ensure the NAVAIR PPSO Mezzanine War Room System equipment is compatible within the space is being created.

2.1.1 The Panel Built in-house installation crews (or approved subcontractor) will ship all equipment requested, including all connectors, installation/shop drawings and bill of materials.

2.1.2. The Contractor shall install the Class A Interior Sound Panel Walls. These walls shall be vinyl covered gypsum board on both sides of the wall and be nine (9) feet tall. The walls shall be 3" thick composite sandwich panels. The outside and inside facing shall be ½ " Class A Fire-shield gypsum board with a vinyl finish of champagne, off-white or gray and laminated to two layers of ½” fiber soundboard and laminated to the core. Every 4’ will have an aluminum extruded binder post with snap cover to house all the electrical components. All binder posts, window trim and doors are painted to match the wall covering.

2.1.3. The Contractor shall install the 20 Gauge Insulated Steel Doors with ½ inch glass. The door(s) shall be 36"w X 84"h X 1 3/4" thick and shall be constructed of 20-gauge hot dipped galvanized steel, mill treated for proper paint adherence. The door shall have top and bottom channel of 16-gauge steel projection welded to door skins on no less than 2" centers. The top channel is to be flush while the bottom channel is to be inverted. The hinge preparations are to be 9-gauge steel reinforcements projection welded to the door skins in six places each. Hinge preparation is to be cut through the doors and provided with reversible filler plates to allow building site handling. Standard hinge preparation is to be 4-1/2" regular weight 0.134" hinge, conforming to ANSI A1567, three preparations. The door frame shall be 16 gauge single "rabbet" commercial quality steel. The frame shall be pre-mortised for application of matching hinges and striker set of the door. The door shall be supplied with all necessary hardware as to meet local and state code requirements. The door shall be fabricated as to include 1/8" tempered safety glass in the upper half. The window shall measure approximately 22"w X 36"h. Each door includes a sweep, threshold, satin chrome leverset and weather-stripping. All leversets are keyed alike.

2.1.4. The Contractor shall provide a total of two (2) wall switch preps, twelve (12) duplex receptacle preps, and eight (8) data communications preps. The contractor shall ensure this package meets National Electrical Code (NEC) (current edition). Panel Built, Inc. shall pre-wire the receptacles, lights, switches and through-the-wall HVAC unit to a Panel Built, Inc. supplied load center attached to the building.

2.1.5. The Contractor shall provide a full set of approval drawings as well as a full set of installation drawings.

3.0 GOVERNMENT RESPONSIBILITES

3.1 The Government shall provide site access and escorts to the installation location(s) and complete the work described in this SOW.

3.2 The Government shall provide forklift and/or heavy equipment if needed for the installation as well as the task of unloading of material

3.3 The Government shall provide a dumpster rental or accept the task of material disposal.

3.4 The Government shall provide reasonable access to work area and typical working hours.

The work area and lay down areas shall be broom cleaned daily as not to interfere with ongoing work. The work area is to be free and clear of any existing obstructions.

4.0 PLACE OF PERFORMANCE

Patuxent River Naval Air Station Building 2272

(End of Summary of Changes)