N00421-19-R-0078_-SOW.pdf

Statement of Work APN7-19 Requirement

A. Background The use of NAVAIR METCAL equipment funding is to procure Calibration Standards (CALSTDs) and ancillary equipment for Aviation Fleet Intermediate Calibration Activities, Fleet Training Activities and Aviation Navy Calibration Laboratories (NCLs) to support Aviation Organizational and Intermediate (I) level maintenance assets.

All Cal Standards listed for procurement must first go through an approval process. This process includes: initial submission by the fleet; review and prioritization by the Fleet TYCOM’s; laboratory workload justification and standardization review by a NAVAIR METCAL technical review team; overall procurement strategy reviews to assess overall program objectives, priorities and funding.

REQUIREMENTS:

1. Calibration Certificate and calibration sticker (as applicable for each unit)

2. Units shall be serialized.

3. IUID label

4. Manufacturer’s Standard Operating and servicing manuals (CD version acceptable) shall be provided with each unit.

B. Tasking:

The contractor shall provide the following equipment (There are no substitutes allowed for this equipment):

1) The contractor shall provide the following equipment (There are no substitutes allowed for this equipment): P/N E8257DN01 US Navy PSG configuration bundle QTY 1 To Include:

a. Standard connector, 3.5 mm

b. Standard front and rear panel connector configuration

c. CD-ROM containing the English documentation set

d. Standard adapter 3.5mm F to 3.5mm F

e. E8257D-H26 Frequency range from 250 kHz to 26.5 GHz

f. E8257D-1EU High output power

g. E8257D-1E1 Step attenuator

h. E8257D-UNX Ultra-low phase noise

i. E8257D-UNT AM, FM, phase modulation, and LF output

j. E8257D-UNW Narrow pulse modulation

k. E8257D-007 Analog ramp sweep

l. E8257D-HGT Provides Gigatronics GT8003 scalar analyzer compatibility

2) The contractor shall provide the following equipment (there are no substitutes allowed for this equipment): P/N N4690D 18 GHz 2-port Type-N 50 ohm ECal module QTY 1 To Include:

a. N4690D-M0F One female and one male connector; both Type-N 50 ohm Qty 1

b. N4690D-003 300 kHz to 18 GHz QTY 1

3) The contractor shall provide the following equipment (there are no substitutes allowed for this equipment): P/N 3458A Digital Multimeter; 8.5 digit Qty 1 To Include:

a. 3458A-120 120-volt ac line selection QTY 1

b. 3458A-ABA English Printed Manual Set QTY 1

4) The contractor shall provide the following equipment (there are no substitutes allowed for this equipment): P/N 8496B 0-110 dB manual step attenuator; 0-18GHz QTY 90 To Include:

a. 8496B-001 Type-N (f) connectors QTY 90

5) The contractor shall provide the following equipment (there are no substitutes allowed for this equipment): P/N N8737A DC Power Supply 60V; 55A; 3300W; GPIB; LAN; USB; LXI QTY 30

6) The contractor shall provide the following equipment (there are no substitutes allowed for this equipment): P/N R-50C-011-3 Calibration Plan - Return to Keysight - 3 years QTY 30

7) The contractor shall provide the following equipment (there are no substitutes allowed for this equipment): P/N R-51B-001-5Z Extended Warranty - Return to Keysight - 5 years QTY 30

8) The contractor shall provide the following equipment (there are no substitutes allowed for this equipment) P/N N8731A-230 DC Power Supply 190-240V; 1 phase AC; 50/60Hz INPUT (use with LINE CORD OPT 831 or 832) QTY 30

9) N8731A-831 Power cord; USA; No Plug; 10awg; 3-wire; 8ft (Input 230VAC 1 phase) QTY 30

10) N8761A DC Power Supply 300V; 17A; 5100W; GPIB; LAN; USB; LXI Qty 30

11) N8751A-208 DC Power Supply 190-240V; 3 phase AC; 50/60Hz INPUT (use with LINE CORD

OPT 861) QTY 30

12) N8751A-861 Power cord; USA; No Plug; 10awg; 4-wire; 8ft (Input 208VAC 3 phase) QTY 30 C. Deliverables Delivery of the equipment shall be provided at the following address:

Ship to

NAVAIR Calibration Standards Attn: Lou Cerrillo (UIC N48535) BLDG 612, Bay 9 MCAS Beaufort, SC 29904 Phone: (843)524-1405 D. Delivery Date

Delivery shall be no later than 8 weeks after award of contract.

***PARTIAL SHIPMENTS ACCEPTED***

E. Invoicing

1) All invoicing shall be submitted into Wide Area Workflow for payment after all material is received in the condition as stated in section B.