SOW_9609.pdf

Statement of Work A. Background The use of NAVAIR METCAL equipment funding is to procure Calibration Standards (CALSTDs) and ancillary equipment for Aviation Fleet Intermediate Calibration Activities, Fleet Training Activities and Aviation Navy Calibration Laboratories (NCLs) to support Aviation Organizational and Intermediate (I) level maintenance assets.

All Cal Standards listed for procurement must first go through an approval process. This process includes: initial submission by the fleet; review and prioritization by the Fleet TYCOM’s; laboratory workload justification and standardization review by a NAVAIR METCAL technical review team; overall procurement strategy review to assess overall program objectives, priorities and funding.

REQUIREMENTS:

1. Calibration Certificate and calibration sticker (as applicable for each unit)

2. Units shall be serialized.

3. Include shipping to destination below.

4. Manufacturer’s Standard Operating and servicing manuals (CD version acceptable) shall be provided with each unit. The DFARS clause listed below must be referenced in all contracts and the manufacturer made aware that the use/reproduction of tech data/manuals (for government use only) will follow these use guidelines.

DFARS SUBPART 227.71 - Rights in Technical Data

5. The US government shall have limited technical data rights for all technical manuals and documents furnished with the procured commercial items, for the purpose of Government use only in duplicating or posting technical documentation to limited access web sites for use by US Government Personnel and Contractors engaged in maintenance, calibration or related logistics activities associated with the procured commercial items in accordance with DFARS 252.227-7015 Technical Data--Commercial Items

B. Tasking:

The contractor shall provide the following equipment:

1) P/N 8493C Coaxial Fixed Attenuator Qty 50 To include the following:

a) Frequency Range: dc to 26.5 GHz

b) Attenuation Accuracy: ±0.6 dB

c) SWR:

a. 8 to 12.4: 1.15

b. 12.4 to 26.5: 1.27

d) Temperature:

a. Operating 0°C to +55°C

b. Storage -55°C to +85°C

e) Humidity:

a. Operating <95% relative at 40°C

b. Storage <95% relative at 40°C

f) Altitude:

a. Operating <4,600 meters (15,000 feet)

b. Storage <15,300 meters (50,000 feet)

g) EMC: Radiated interference is within the requirements of MIL STD 461 method RE02, VDE 0871 EN55011 and FCC part 18

h) Dimensions:

a. Millimeters: 33.8 X 8

b. Inches: 1 5/16 X 5/16 D

i) Maximum input power: 2 W avg., 100 W peak3

j) Power sensitivity: 0.001 dB/W

k) P/N 8493C-006 6 dB Attenuator Qty 50

2) P/N E3645A DC Power Supply Qty 40

To include the following:

a) Programming accuracy (@ 25°C ±5°C), ± (% output + offset)): 1

b) Ripple & noise: 20 Hz to 20 MHz e 2

c) Programming accuracy (@ 25°C ±5°C), ± (% output + offset):

a. Output voltage: 200 V

b. Output current: 11 A

d) Programming accuracy (at 25 °C ± 5 °C):

a. Voltage: 200 mV

b. Current: 8 mA

e) Ripple and noise from 20 Hz to 20 MHz:

a. Normal Mode Voltage: <8 mVpp / 1 mVrms

b. Normal Mode Current: <4 mArms Read back accuracy at 25 °C ± 5 °C:

(percent of reading plus fixed)

f) Load and line regulation:

a. Voltage: 7 mV

b. Current: 1 mA

g) Transient response time: Less than 900 μs for the output voltage to recover to within 100 mV following a change in load from 100% to 50% or 50% to 100% of the output current rating of the supply

100% to 50% or 50% to 100% of the output current rating of the supply

h) Average programming resolution:

a. Voltage: 50 mV

b. Current: 2.75 mA

i) Read back accuracy (@ 25°C ±5°C), ± (% output + offset):

a. Voltage: <0.05% + 5 mV (<0.1% + 25 mV for output 2 of

E3646/47/48/49A)

b. Current: <0.15% + 5 mA (<0.15% + 10 mA for output 2 of

E3646/47/48/49A)

3) P/N 11667B Power Splitter Qty 24

To include the following:

a) Frequency Range: dc to 26.5 GHz

b) Equivalent output SWR (nominal 50 Ω): 1.22

c) Maximum input power: 0.5 W

d) Nominal Insertion loss (input to either output): 7 dB

e) Tracking between any two ports: <0.25 dB

f) Connectors: 3.5 mm (f) all ports

4) P/N 8478B Coaxial Thermistor Mount Qty 70 To include the following:

a) Frequency Range: 10 MHz to 18 GHz

b) Maximum SWR:

a. 10 MHz to 30 MHz 1.75

b. 30 MHz to 100 MHz

c. 1.35100 MHz to 1 GHz 1.10

d. 1 GHz to 12.4 GHz 1.35

e. 12.4 GHz to 18 GHz 1.60

5) P/N 8478B-H48 Improved VSWR Qty 70

6) P/N 8710-1764 Torque Wrench 8in/lb. 20 mm open end Qty 20

7) P/N 8710-1765 Torque Wrench 8in/lb. 5/16 inch Qty 121

8) P/N 8710-1766 Torque Wrench 12lb/in ¾ in; open end Qty 21

C. Deliverables Delivery of the equipment shall be provided at the following address:

Ship to:

NAVAIR Calibration Standards Attn: Lou Cerrillo (UIC N48535) BLDG 612 Itami Ave; Bay 9 MCAS Beaufort, SC 29904

Phone: (843)524-1405 D. Delivery Date

Delivery shall be no later than 14 weeks after award of contract.

***PARTIAL SHIPMENTS ACCEPTED***

E. Invoicing

1) All invoicing shall be submitted into Wide Area Workflow for payment after all material is received in the condition as stated in section B.