N00421-19-Q-0042.docx

N0042119Q0042

Section A - Solicitation/Contract Form

POC

Block 6, Issued by, to include the following information:

Francine Keys Phone: (301) 757-5210 Email: francine.keys@navy.mil

Block 9, Contractor, to include the following information:

DUNS:

Company POC:

Phone:

Email:

Quote:

TPOC is: Nicholas Wirz, 301-757-7408, nicholas.wirz@navy.mil

EARLY & PARTIAL SHIPMENTS ARE ACCEPTABLE

PAYMENT/INVOICING ISSUES: PLEASE CONTACT COMPTROLLER BELOW.

N64142 NAWCAD

COMPTROLLER

INTERNAL ENTITLEMENTS TEAM BLDG 440 ROOM 25

47122 LILJENCRANTZ ROAD

PATUXENT RIVER, MD 20670-1549

INTERNAL ENTITLEMENTS TEAM 301-342-9586

EMAIL: PAXR_ACCT_INTERNAL_ENTITLEMENTS@NAVY.MIL

WAWF Invoicing Help & Instructions:

Visit the website at https://wawf.eb.mil/ and you can find help via the link "Vendors - Getting Started Help" under the New User section. The WAWF helpdesk for vendors is 1-866-618-5988

Section B - Supplies or Services and Prices

TPS VSS Learjet Japanese SC

FFP

Provide funding for contract to be negotiated or not to exceed 10.8 hours in the VSS Learjet and 30 hours classroom instruction on advanced flight control theory to support the U.S. Naval Test Pilot School Japanese Advanced Flight Control Short Course FOB: Destination

PURCHASE REQUEST NUMBER: 1300750122

ADDITIONAL MARKINGS: Nicholas Wirz

NET AMT

Section C - Descriptions and Specifications

SOW

Based Statement of Work For U. S. Naval Test Pilot School

SHORT COURSE QUALITATIVE EVALUATION

1.0 Introduction: The U. S. Naval Test Pilot School (USNTPS) is acquiring flight demonstration flight support and classroom instruction on advanced flight control theory for the Japanese Advanced Flight Control Short Course flight exercise.

2.0 Background: The USNTPS Short Course Department trains Engineering Flight Test Pilots, Flight Officers, and Flight Test Engineers for the Department of Defense and its contractors, Department of Homeland Security, and International Flight Test Organizations. The Short Course Department offers a series of two-week courses that are designed to expose students to basic flight test principles associated with airplane and rotary wing flying qualities, airborne systems, and performance characteristics. A key element of each short course is a formal student flight demonstration/evaluation to provide hands-on experience with test techniques. The Japanese Advanced Flight Control Short Course flight evaluation is managed by USNTPS personnel using a contractor supplied instrumented airplane and pilot.

3.0 Scope: The contractor shall provide up to 10.8 flight hours in the VSS Learjet and 30 hours classroom instruction on advanced flight control theory to the U.S. Naval Test Pilot School Japanese Advanced Flight Control Short Course Students. Flight demonstration shall take place at NAS Patuxent River (dry rate) in Maryland or Nigara Fall, NY (wet rate). Additionally, the contractor shall provide access to airworthiness and maintenance documentation for the aircraft.

4.0 Applicable Documents

4.1. OPNAVINST 3710.7 Series

5.0 Period of Performance. The period of performance for this flight demonstration/evaluation and classroom instruction is 11/26/2018 -12/14/2018.

6.0 Performance Requirements. During each flight, the longitudinal and lateral-directional flying qualities will be demonstrated and evaluated throughout the aircraft’s operating envelope. The contractor or contractor-approved pilot-in-command (hereafter referred to as the Safety Pilot) shall be in the airplane for all flights and shall act as the pilot-in-command. The Safety Pilot will occupy the copilot seat unless flying with a non-rated pilot. Contractor support services shall include:

6.1. A thorough, 1-hour briefing for each student covering aircraft systems, limitations, and procedures.

6.2. A contractor provided Safety Pilot to act as the pilot-in-command for all flights.

6.2.1. A summary of the Safety Pilot’s flight experience (flight hours/ratings/records) will be furnished to the Test Pilot School Operations Department.

6.3. Maintenance, oil, special equipment, and any other support services associated with the operation of the aircraft.

6.3.1. The contractor shall comply with Federal regulations for all hazardous material as found in the Code of Federal Regulations (CFR), Title 40, Parts 260-265, 270, 300 and state regulations for hazardous wastes found in the Code of Maryland Regulations (COMAR), Title 10, Subtitle 26. The contractor shall be responsible for transportation, accumulation, and turn-in of regulated and hazardous waste, waste oils/fuels if not previously agreed to. Material safety data sheets for all hazardous materials brought on station will be mailed to USNTPS, Hazardous Waste Program Manager, Code 55TP91A, at least two weeks prior to arrival.

6.4. Any flight gear specific to the aircraft type.

6.5. Fully operational VSS Learjet with operational FQ instrumentation.

6.5.1. The provided airplane must meet applicable FAA standards for the appropriate category and class.

6.6. Demonstration flights totaling approximately 10.8 hours.

7.0 In addition to all applicable Federal Aviation Regulations, the minimum qualifications for the contractor furnished Safety Pilot are:

7.1. Safety Pilot will be current in aircraft.

7.2. Not less than 500 hours total time.

7.3. Must have a current FAA commercial license (CFI desired) with current medical qualifications and required aircraft certifications.

7.4. If the Safety Pilot has not previously flown with USNTPS, an initial Safety Pilot qualification flight and familiarization will be completed prior to student flights.

8.0 USNTPS will pay the flight hour rate for actual flight time. Actual flight time for reporting purposes is defined in OPNAVINST 3710.7 Series. The rate includes all costs for the contractor safety pilot, airplane usage and maintenance.

9.0 The contractor maintains liability for any damage or loss of the aircraft and third party liability.

10.0 Standards of Quality and Timeliness

PBSOW

Paragraph Performance Objective Performance Standard Acceptable Quality Level Method of Surveillance

Observation & Analysis

Observation & Analysis of applicable documents

Observation & Analysis

Observation & Analysis

Government Observation & Analysis

Observation & Analysis

Observation & Analysis

Observation & Analysis

Section E - Inspection and Acceptance

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

Section F - Deliveries or Performance

DELIVERY INFORMATION

14-DEC-2019

NICHOLAS WIRZ

HANGAR 110

22783 CEDAR POINT ROAD

BLDG. 2168 USNTPS

PATUXENT RIVER MD 20670

301-757-7408 FOB: Destination N00421

CLAUSES INCORPORATED BY REFERENCE

Section G - Contract Administration Data

CLAUSES INCORPORATED BY FULL TEXT

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (MAY 2013)

(a) Definitions. As used in this clause--

Department of Defense Activity Address Code (DoDAAC) is a six position code that uniquely identifies a unit, activity, or organization.

Document type means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

Local processing office (LPO) is the office responsible for payment certification when payment certification is done external to the entitlement system.

(b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall--

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.acquisition.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this Web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/.

(e) WAWF methods of document submission. Document submissions may be via Web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order:

(1) Document type. The Contractor shall use the following document type(s).

COMBO

(Contracting Officer: Insert applicable document type(s). Note: If a “Combo” document type is identified but not supportable by the Contractor's business systems, an “Invoice” (stand-alone) and “Receiving Report” (stand-alone) document type may be used instead.)

(2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer.

SEE SECTION E

(Contracting Officer: Insert inspection and acceptance locations or “Not applicable”.)

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table* Field Name in WAWF Data to be entered in WAWF

(*Contracting Officer: Insert applicable DoDAAC information or “See schedule” if multiple ship to/acceptance locations apply, or “Not applicable.”)

(4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g. timesheets) in support of each payment request.

(5) WAWF email notifications. The Contractor shall enter the email address identified below in the “Send Additional Email Notifications” field of WAWF once a document is submitted in the system.

Juile LaRocco-Thompson, 301-757-4717 juile.larocca-thompson@navy.mil

(Contracting Officer: Insert applicable email addresses or “Not applicable.”)

(g) WAWF point of contact. (1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

(Contracting Officer: Insert applicable information or “Not applicable.”)

(2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988.

(End of clause)

Section I - Contract Clauses

CLAUSES INCORPORATED BY FULL TEXT

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS—COMMERCIAL ITEMS (DEVIATION 2018-O0021) (SEP 2018)

(a) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (a) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records—Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor’s directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(b)(1) Notwithstanding the requirements of any other clauses of this contract, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (b) (1) in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause—

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509).

(ii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(iii) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (Jul 2018) (Section 1634 of Pub. L. 115-91).

(iv) 52.219-8, Utilization of Small Business Concerns (Nov 2016) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $700,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(v) 52.222-17, Nondisplacement of Qualified Workers (MAY 2014) (E.O. 13495). Flow down required in accordance with paragraph (l) of FAR clause 52.222-17.

(vi) 52.222-21, Prohibition of Segregated Facilities (APR 2015).

(vii) 52.222-26, Equal Opportunity (Sept 2016) (E.O. 11246).

(viii) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212).

(ix) 52.222-36, Equal Opportunity for Workers with Disabilities (July 2014) (29 U.S.C. 793).

(x) 52.222-37, Employment Reports on Veterans (FEB 2016) (38 U.S.C. 4212).

(xi) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.

(xii) 52.222-41, Service Contract Labor Standards (Aug 2018) (41 U.S.C. chapter 67).

(xiii)(A) 52.222-50, Combating Trafficking in Persons (Mar 2015) (22 U.S.C. chapter 78 and E.O. 13627).

(B) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

(xiv) 52.222-51, Exemption from Application of the Service Contract Act to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (May 2014) (41 U.S.C. chapter 67).

(xv) 52.222-53, Exemption from Application of the Service Contract Act to Contracts for Certain Services-Requirements (May 2014) (41 U.S.C. chapter 67).

(xvi) 52.222-54, Employment Eligibility Verification (Oct 2015) (E.O. 12989).

(xvii) 52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015).

(xviii) 52.222-62 Paid Sick Leave Under Executive Order 13706 (Jan 2017) (E.O. 13706).

(xix)(A) 52.224-3, Privacy Training (JAN 2017) (5 U.S.C. 552a).

(B) Alternate I (JAN 2017) of 52.224-3.

(xx) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

(xxi) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (May 2014) (42 U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.

(xxii) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx. 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.

(2) While not required, the contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations.

(End of clause) image1.wmf