SOW_-_Synopsis_Posting.DOC

Statement of Work BS-650013.APN7METCAL93- Physical Dimensional-OPT A. Background The Naval Air Warfare Center Aircraft Division has a requirement to procure Calibration Standards (CALSTDs) and ancillary equipment for Aviation Fleet Intermediate Calibration Activities, Fleet Training Activities and Aviation Navy Calibration Laboratories (NCLs) to support Aviation Organizational and Intermediate (I) level maintenance assets. All Cal Standards listed for procurement must first go through an approval process. This process includes: initial submission by the fleet; review and prioritization by the Fleet TYCOM’s; laboratory workload justification and standardization review by a NAVAIR METCAL technical review team; overall procurement strategy review to assess overall program objectives, priorities and funding.

B. Tasking:

REQUIREMENTS:

1. Mfr. one year warranty with sticker affixed to each unit plus a warranty certificate.

2. Calibration Certificate and calibration sticker (as applicable for each unit)

3. Units shall be serialized.

The contractor shall provide the following equipment with no substitutions:

1) P/N TA-99903-KIT AP Dynamometer Calibration Fixture Kit Quantity (Qty) of 15 to include the following:

a) 604713 Clevis Tension Member Assembly for AP Dynamometers with Shackles, Capacity: 5k lbf. - Qty 30

b) 604714 Tension Member Assembly for AP Dynamometers with Shackles, Capacity: 20K lbf. - Qty 30

c) Thickness 604715 Tension Member Assembly for Dynamometers, Capacity: 50K lbf. - Qty 30

d) 604733 Clevis Tension Member Assembly with Bearings, Capacity: 100K lbf. - Qty 30

e) iM2300 Pelican iM2300 Storm Case with custom-cut foam for instruments - Qty 15

f) iM2700 Pelican iM2700 Storm Case with custom-cut foam for instruments - Qty 15

g) For use Universal Calibration Machine Model 99870 or 47000

2) P/N UCM-KIT-99879 Accessory Kit For 100,000 LBF Morehouse Universal Calibration Machine - Qty of 15 to include the following:

a) 600017.01 1/2"-20 LC Ball Adapter with 3/8" Ball, Capacity: 2k lbf. - Qty 15

b) 600017.02 1"-14 LC Ball Adapter with 7/16" Ball, Capacity: 30k lbf. - Qty 15

c) 600043.04 1" Dia., 3/4"-16 Threaded Alignment Bearing Block, Capacity: 35K lbf. - Qty 15

d) 600043.06 1.5" Dia., 3/4"-16 Threaded Alignment Bearing Block, Capacity: 110K lbf. - Qty 15

e) 600043.07 1.75 Dia., 3/4-16 Threaded Alignment Bearing Block, Capacity 110K lbf. - Qty of 15

f) 600009.03 1/2"-20UNF-2A, Load Cell Locating Plug - Qty 15

g) 600009.05 3/4"-16UNF-2A, Load Cell Locating Plug - Qty 15

h) 604728 Load Cell Alignment Adapter, Capacity 100K- Qty 15

i) 615322.04 2" Jack Extension Block, Capacity 200K - Qty 30

j) 615322.14 7" Jack Extension Block, Capacity 200k- Qty 15

k) iM2700 Pelican iM2700 Storm Case with custom-cut foam for instruments - Qty 15

3) P/N 600006.06 3/4"-16UNF-2A, 3/8" or 7/16" Ball Adapter for 30k+ UCMs, Capacity: 30k lbf. - Qty 30

4) P/N 600006.02 3/4"-16UNF-2A, 5/8" Ball Adapter for 30k+ UCMs, Capacity: 60k lbf. - Qty 15

5) P/N 600006.04 3/4"-16UNF-2A, 1.5" Ball Adapter for 30k+ UCMs, Capacity: 200k lbf. - Qty 15

6) P/N 600007.04 1" Dia. Retainer Clip with 7/16" Ball, Capacity: 3k lbf. - Qty 15

7) P/N 600007.05 1.25" Dia. Retainer Clip with 7/16" Ball, Capacity: 5K lbf. Qty 15

8) P/N 600007.06 1.5" Dia. Retainer Clip with 7/16" Ball, capacity: 11k lbf. Qty 15

9) P/N 600007.07 1.75" Dia. Retainer Clip with 7/16" Ball, Capacity: 35K lbf. - Qty 15

10) P/N 600007.10 2.25" Dia. Retainer Clip with 5/8" Ball, Capacity: 60K lbf. - Qty 15

11) P/N 600007.14 2.5" Dia. Retainer Clip with 1.50" Ball Capacity: 110K lbf. 1 418.00 - Qty 15

12) P/N 139017 Jack Insert for 60K -200K Universal Calibrating Machine Jacks - Qty 15 C. Deliverables

Delivery of the equipment shall be provided at the following address:

Ship to:

NAVAIR Calibration Standards

Attn: Lou Cerrillo (UIC N48535)

BLDG 612, Bay 9 MCAS

Beaufort, SC 29904

Phone: (843)524-1405 D. Delivery Date

Delivery shall be 8 weeks after award of contract.

E. Invoicing All invoicing shall be submitting into Wide Area Workflow for payment after ALL material is received in the condition as stated in section B.

VENDOR – IF ELECTRONIC EQUIPMENT, PLEASE MARK BOX/PACKAGE CONTAINING ELECTRONIC EQUIPMENT WITH THE “DO NOT SCAN” STICKER