Statement_of_Work.doc

Statement of Work APN7-17 Requirement BS-650013.APN7METCAL95- Automated/Interface CALSTD.

A. REQUIREMENTS:

1. Mfr. one year warranty with sticker affixed to each unit plus a warranty certificate.

2. Calibration Certificate and calibration sticker (as applicable for each unit)

3. Units (over $5,000) shall have an IUID Label applied per DFAR 252.211-7003.

4. Manufacturer’s Standard Operating and servicing manuals (CD version acceptable) shall be provided with each unit. The DFARS clause listed below must be referenced in all contracts and the manufacturer made aware that the use/reproduction of tech data/manuals (for government use only) will follow these use guidelines.

DFARS SUBPART 227.71 - Rights in Technical Data

5. The US government shall have limited technical data rights for all technical manuals and documents furnished with the procured commercial items, for the purpose of Government use only in duplicating or posting technical documentation to limited access web sites for use by US Government Personnel and Contractors engaged in maintenance, calibration or related logistics activities associated with the procured commercial items in accordance with DFARS 252.227-7015 Technical Data--Commercial Items.

B. Tasking:

The contractor shall provide the following equipment:

1) P/N 910R GPS/Rubidium Frequency Reference Qty 125 To include the following:

a) Frequency stability locked to GPS:

a. Frequency offset (24h mean):

i. < 1 x 10

ii. Short term (Allan dev.):

iii. < 1 x 10-12 (τ = 1000 s)

iv. < 3 x 10-12 (τ = 100 s)

v. < 1 x 10-11 (τ = 10 s)

vi. < 3 x 10-11 (τ = 1 s)

b. Warm up (+25 °C): 20 mins to lock

b) Frequency Stability Hold-Over:

a. Aging/24h: < 2 x 10-12 (typ.)

b. Aging/month: < 5 x 10-11

c. Temp. (0 °C to + 50 °C): < 3 x 10-10

d. Temp. (23 °C ± 3 °C): < 2 x 10-11 (typ.)

e. Short term (Allan dev.):

i. < 3 x 10-12 (τ = 100 s)

ii. < 1 x 10-11 (τ = 10 s)

iii. < 3 x 10-11 (τ = 1 s)

f. Warm up (+25 °C): 10 minutes to 4 x 10-10

c) Phase noise:

a. Offset Phase noise:

i. 1 Hz -80 dBc/Hz (typ.)

ii. 10 Hz -90 dBc/Hz (typ.)

iii. 100 Hz -130 dBc/Hz (typ.)

iv. 1 kHz -140 dBc/Hz (typ.)

v. 10 kHz -140 dBc/Hz (typ.)

vi. 100 kHz -145 dBc/Hz (typ.)

d) Common:

a. Reference outputs (BNC):

i. 10 MHz: Sine wave, 0.6 V rms into 50 Ω

ii. 5 MHz: Sine wave, 0.6 V rms into 50 Ω

iii. 1 pps: TTL-levels; low < 0.4 High > 2 V into 50 Ω load.

iv. Pulse output (opt. 75): TTL-levels; low < 0.4 V, high > 2 V into 50 Ω load

e) 1-pps output (locked to GPS):

a. Duty cycle: Approx. 20 %

b. Jitter: < 60 ns rms relative to UTC or GPS (position hold, SA on)

f) Internal data storage:

a. 24h-freq. offset: two-years data, non-volatile memory

b. Adjustment data: two-years data, non-volatile memory

c. Phase data (TIE): 40-days data, volatile

g) LED indicators:

a. Locked to GPS, Alarm, Manual Hold-Over

h) Display indicators:

a. 7-segment area:

i. 24h mean freq. offset (if valid data exist)

ii. Time of day (if GPS gives valid time)

iii. Alarm text (plus Alarm LED)

b. REMOTE segment: Local lock-out (from PC)

c. Analog bar graph: Satellite signal strength

i) GPS-receiver:

a. Antenna connector: Type N

b. Channels: 8, parallel tracking

c. Carrier, code: L1, C/A

j) PC-connection: Interface: RS-232, DTE

k) Environmental:

a. Temperature: 0 °C to +50 °C (operating) -40 °C. to +70 °C (storage)

b. Safety: Compliant to CE: EN 61010-1 + A1 (1992) + A2 (1995)

c. EMI: Compliant to CE: EN 61326-1 (1997)

l) Power consumption:

a. Line voltage: 100 V to 240 V (± 10 %)

b. Line frequency: 47 Hz to 63 Hz

c. Power 910R: < 75 W at warm-up < 35 W continuous operation

m) Dimensions: (WxHxD): 315 mm x 86 mm x 395 mm (12.4 in x 3.4 in x 15.6 in)

n) Weight: 4.4 kg (9.7 lb.)

o) UID labels for all units

2) P/N Z540 CAL CERT Qty 125

3) P/N 910R-01 GPS ANTENNA Qty 125

4) P/N 910R-02/50 .50 CABLE Qty 125

5) P/N 910R-01/50.ANTENNA MOUNTING KIT Qty 125

C. Deliverables

Delivery of the equipment shall be provided at the following address:

NAVAIR Calibration Standards (UIC N48535)

Attn: Lou Cerrillo

BLDG 612, Bay 9 MCAS

Beaufort, SC 29904

Phone: (843)524-1405 D. Delivery Schedule:

10 units per month starting 11/01/2017

10 units due 12/15/2017

10 units due 01/15/2018

10 units due 02/15/2018

10 units due 03/15/2018

10 units due 04/15/2018

10 units due 05/15/2018

10 units due 06/15/2018

10 units due 07/15/2018

10 units due 08/15/2018

10 units due 09/15/2018

10 units due 10/15/2018

05 units due 11/15/2018 Delivery shall start later than 3months after award of contract, and last delivery shall be absolutely no later than November 15, 2018 ***PARTIAL SHIPMENT ACCECPTED*** E. Invoicing All invoicing shall be submitting into Wide Area Workflow for payment after ALL material is received in the condition as stated in section B.

VENDOR – IF ELECTRONIC EQUIPMENT, PLEASE MARK BOX/PACKAGE CONTAINING ELECTRONIC EQUIPMENT WITH THE “DO NOT SCAN” STICKER