SPECIFICATION_GUIDE.docx

SPECIFICATION GUIDE

1.0 BACKGROUND AND SCOPE

1.1 Background

At the direction of the Chief of Naval Operations (CNO), the MK 38 MOD 2 Machine Gun System (MGS) was developed in 2003 to improve ship self-defense. The rapid fielding of the MGS has been deemed a necessity by the PEO IWS for a ship’s close in defense against small craft, swimmers, floating mines, and various targets ashore including enemy personnel, lightly armored vehicles and terrorist threats. The nature of the requirements (crane services, rigging, etc.) and length of installation requires the MK 38 MOD 2 MGS installations occur during scheduled maintenance windows. Once the window passes for a particular ship, it is generally two years before they enter another planned maintenance window.

The Ship and Air Integrated Warfare Division (AIR 4.11.3) of the Naval Air Warfare Center, Aircraft Division (NAWCAD), St. Inigoes, has been tasked by the Program Executive Office Integrated Weapons Systems (PEO IWS) to outfit various U.S. Navy ships with Remote Operator Consoles (ROCs). The ROCs will serve as an operation station for the user and will hold the monitor and gun controllers for the MK 38 MOD 2 MGS.

1.2 Scope

This statement of work (SOW) provides for the fabrication and procurement of seventy-five (75) ROCs in support of the MK 38 MOD 2 MGS installation project. The drawings/item specifications provided as part of the SOW, will ensure the consoles built by the vendor, will provide the required functionality and operational performance required. The ROC serves as the platform for the user, additionally, housing the Display Assembly (MFD), Main Control Panel (MCP) and the Junction Box (JBX) for the MGS.

2.0 REQUIREMENTS

The contractor shall fabricate and deliver seventy-five (75) ROCs to NAWCAD, St. Inigoes, MD, in accordance with the drawings/specifications provided. The consoles will be used as part of the installation of the MK 38 MOD 2 MGS.

3.0 APPLICABLE DRAWING/ITEM SPECIFICATIONS

Drawing Number: 8180357 Drawing Number: 8180358 Drawing Number: 8180359 Drawing Number: 8180360 Drawing Number: 8180361

4.0 GOVERNMENT RESPONSIBILITY

The Government will provide the drawings/specifications for the design of the ROCs.

5.0 DELIVERY SCHEDULE

The contractor shall deliver, on the first shipment, fifteen (15) complete ROCs per the schedule in the Table 1 below. All subsequent deliveries of Equipment Sets, to fulfill the seventy-five (75) ROC requirement, will adhere to the schedule in Table 1. The Government will accept early deliveries as well as additional quantities, not to exceed the seventy-five (75) ROCs required.

Table 1. Required Delivery Dates

Equipment Set

Required Delivery Date

Equipment Set No.1 (Qty. of 15 )

17 MAR 2016

Equipment Set No.2 (Qty. of 30 )

09 JUN 2016

Equipment Set No.3 (Qty. of 30 )

01 SEP 2016

6.0 POC

Jason Walker, NAWCAD 4.11.3.2, 301-995-8819 or jason.walker1@navy.mil