N0040619Q0069_Sources_Sought_Notice.pdf

SOURCES SOUGHT NOTICE

NAVSUP Fleet Logistics Center Puget Sound is preparing a solicitation for a firm fixed priced service type contract to provide field service technician(s), parts, and special tools to perform the replacement of the number one, two, and three low pressure air compressor (LPAC) and the corresponding programmable logic controllers (PLC) onboard a Naval Vessel located at Yokosuka, Japan.

REFERENCES:

1. NAVSEA STANDARD ITEMS

2. S6220-EE-MMA-010 TECHNICAL MANUAL FOR COMPRESSOR, AIR LOW

3. PRESSURE, OIL-FREE, MODEL STAR 200 WITH SYSTEM ENGINEERING

MANAGEMENT (SEM) DESIGN CONTROLLER

4. S6220-EU-MMA-010 TECHNICAL MANUAL FOR COMPRESSOR, AIR LOW

5. PRESSURE, OIL-FREE, MODEL STAR 200C AND 200D WITH RIX

PROGRAMMABLE LOGIC CONTROLLER

6. S9AA0-AB-GOS-010 REV 09 GENERAL SERVICE AND OVERHAUL

7. JCN 21940-EM04-L00K “CLASS B OVERHAUL DDG 65 LPACS”

8. FAR 52.209-1 -- Qualification Requirements

DESCRIPTION OF TASKS:

1. Obtain or demonstrate NAVSEA approval IAW with reference 8 and NAVSEA Standard

Item 009-90 to provide Technical Representatives capable of the following tasks.

2. Provide Original Equipment Manufacturer (OEM) field service repairs in accordance with reference 1-8 for three Low Pressure Air Compressors, RIX Model STAR-200 Oil Free.

3. Accomplish class “B” overhaul in accordance with reference 1-8 for three Low Pressure Air Compressors, RIX Model STAR-200 Oil Free. A class B overhaul will restore the operating and performance characteristics of a system, subsystem, or component to its original design and technical specifications. The repair and refurbishment of systems, equipment and components is intended to restore items to their original performance profiles and to assure the items will function properly without failure between ships overhauls.

4. Replace Compressor Management System and, or, Programmable Logic Controller (PLC) in accordance with reference 1-8 for on three Low Pressure Air Compressors, RIX Model STAR-200 Oil Free.

5. Accomplish requirements of NAVSEA Standard Item 009-36 –Controller, Repair.

6. Accomplish requirements of NAVSEA Standard Item 009-17 – Rotating Electrical

Equipment, Repair, on drive motors in accordance with reference 3.1 one all equipment listed in 4.1 through 4.3.

7. Accomplish requirements of NAVSEA Standard Item 009-13 – Meter, Repair, on all meters and gages in accordance with reference 1-8 on three Low Pressure Air Compressors, RIX Model STAR-200 Oil Free.

8. Initial condition of equipment: IAW reference 7 each LPAC has exceeded its 5,000 hours of “run time” and is due for class “B” overhaul.

9. All equipment shall be operated by Ship’s Force. The contractor shall not operate shipboard equipment.

10. In accordance with reference 1, provide a test and inspection plan (TIP) identifying all required tests, inspections, and checkpoints to the GSO.

An electronic draft copy of the Performance Work Statement may be requested from the contract specialist via email at: charles.seipt@navy.mil

The period of performance will begin on 1 April 2019 and end 30 April 2019.

The purpose of this Sources Sought Notice is to determine whether or not the requirement can be fulfilled by any small business concerns.

It is anticipated that the solicitation will be available on the NECO website beginning 25 March 2019.

Attention: All interest offerors please provide the following information:

The type of work your company has performed in the recent past in support of the same or similar requirements

Whether or not your company has managed a task of this nature before Whether or not your company has managed a team of subcontractors, and if so, how many The specific technical skills your company possesses which will ensure capability to perform the requirements An explanation of your company’s ability to perform greater than 50 percent of the efforts required The business size standard of your company for NAICS 811310 Your company’s Cage Code Your company point of contact.