18-Q-0271.docx

N0040618Q0271

Section SF 30 - BLOCK 14 CONTINUATION PAGE

NOTICE TO OFFERORS

1. QUESTIONS: All questions regarding this solicitation shall be submitted in writing (e-mail or fax) to:

2. EVALUATIONS: Proposals will be evaluated in accordance with paragraph entitled “Evaluations of Quotations / Offers”. Ensure your proposal is submitted in accordance with paragraph entitled “Evaluations of Quotations / Offers”.

3. SOLICITATION: The entire completed and signed solicitation shall be returned as part of your offer. Also, be sure to complete all certifications in this solicitation.

4. Shipping will be FOB-ORIGIN/Facts SP (NOLSC).

*************THIS IS A 100% SMALL BUSINESS SET ASIDE. ONLY OFFERS WITH USA MADE MATERIAL WILL BE ACCEPTED AT THIS TIME. IF YOU ARE A SMALL BUSINESS OFFERING MATERIAL MANUFACTURED BY A BUSINESS OTHER THAN YOUR OWN, THEY (THE ACTUAL MANUFACTURER) MUST ALSO QUALIFY AS A SMALL BUSINESS (UNDER 500 EMPLOYEES).************

**************THE FOLLOWING INFORMATION MUST BE PROVIDED****************

Bidding On:

CLIN 0001

Manufacturer's Name: __________________________________________ Manufacturer’s Part No. _______________________________________ Manufacturer’s Size: __________________________________________ Country of Origin:_____________________________________________

CLIN 0002

Manufacturer's Name: __________________________________________ Manufacturer’s Part No. _______________________________________ Manufacturer’s Size: __________________________________________ Country of Origin: _____________________________________________

CLIN 0003

Manufacturer's Name: __________________________________________ Manufacturer’s Part No. _______________________________________ Manufacturer’s Size: __________________________________________ Country of Origin:_____________________________________________

CLIN 0004

Manufacturer's Name: __________________________________________ Manufacturer’s Part No. _______________________________________ Manufacturer’s Size: __________________________________________ Country of Origin: _____________________________________________

CLIN 0005

Manufacturer's Name: __________________________________________ Manufacturer’s Part No. _______________________________________ Manufacturer’s Size: __________________________________________ Country of Origin:_____________________________________________

CLIN 0006

Manufacturer's Name: __________________________________________ Manufacturer’s Part No. _______________________________________ Manufacturer’s Size: __________________________________________ Country of Origin: _____________________________________________

CLIN 0007

Manufacturer's Name: __________________________________________ Manufacturer’s Part No. _______________________________________ Manufacturer’s Size: __________________________________________ Country of Origin:_____________________________________________

CLIN 0008

Manufacturer's Name: __________________________________________ Manufacturer’s Part No. _______________________________________ Manufacturer’s Size: __________________________________________ Country of Origin: _____________________________________________

CLIN 0009

Manufacturer's Name: __________________________________________ Manufacturer’s Part No. _______________________________________ Manufacturer’s Size: __________________________________________ Country of Origin:_____________________________________________

CLIN 00010

Manufacturer's Name: __________________________________________ Manufacturer’s Part No. _______________________________________ Manufacturer’s Size: __________________________________________ Country of Origin: _____________________________________________

CLIN 0011

Manufacturer's Name: __________________________________________ Manufacturer’s Part No. _______________________________________ Manufacturer’s Size: __________________________________________ Country of Origin:_____________________________________________

CLIN 0012

Manufacturer's Name: __________________________________________ Manufacturer’s Part No. _______________________________________ Manufacturer’s Size: __________________________________________ Country of Origin: _____________________________________________

CLIN 0013

Manufacturer's Name: __________________________________________ Manufacturer’s Part No. _______________________________________ Manufacturer’s Size: __________________________________________ Country of Origin:_____________________________________________

CLIN 0014

Manufacturer's Name: __________________________________________ Manufacturer’s Part No. _______________________________________ Manufacturer’s Size: __________________________________________ Country of Origin: _____________________________________________

CLIN 0015

Manufacturer's Name: __________________________________________ Manufacturer’s Part No. _______________________________________ Manufacturer’s Size: __________________________________________ Country of Origin:_____________________________________________

CLIN 0016

Manufacturer's Name: __________________________________________ Manufacturer’s Part No. _______________________________________ Manufacturer’s Size: __________________________________________ Country of Origin: _____________________________________________

Section SF 1449 - CONTINUATION SHEET

SCUTTLE MARINE

FFP

SCUTTLE,MARINE

WATERTIGHT, QUICK ACTING, BALLISTIC,

SIZE: 18 INCH OPENING, SPRING BALANCED, 30 PSIG, 3 DOGS,

FORMULA 150 FINISH, DWG 124-7121006 ASSY 98

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Origin (Shipping Point)

MILSTRIP: N6275881597456

MFR PART NR: JE200-21821-10

PC NR: MWO

SPEC NR: HULLCVN76

PURCHASE REQUEST NUMBER: N6275881597456

PROJECT: 502

SIGNAL CODE: A

NET AMT

DOOR BALLISTIC QUICK

DOOR,BALLISTIC,QUICK ACTING, AIRTIGHT,

SIZE 26 INCH X 66 INCH,

RH, 3 DOGS, 2 PSI, HY80 STEEL, PANEL THK 0.750 INCH,

DWG: 805-1630164 AY B

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Origin (Shipping Point)

MILSTRIP: N6275881597457

MFR PART NR: JE0164-DBQ-02

PC NR: MWO

SPEC NR: HULLCVN76

PURCHASE REQUEST NUMBER: N6275881597457

NET AMT

DOOR QUICK ACTING AI

DOOR,QUICK ACTING,AIRTIGHT

SIZE: 48 INCH X 72 INCH, PANEL THK 0.750 INCH,

RIGHT HAND, 3 DOGS, 2 PSI, STEEL,

WITHOUT FIXED LIGHT, WITHOUT HASP, FORMULA 150

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Origin (Shipping Point)

MILSTRIP: N6275881597458

MFR PART NR: JE200-21821-33

PC NR: MWO

SPEC NR: HULLCVN76

PURCHASE REQUEST NUMBER: N6275881597458

NET AMT

DOOR QUICK ACTING AI

DOOR,QUICK ACTING,AIR TIGHT,

SIZE: 42 INCH X 72 INCH, PANEL THK 0.750 INCH,

LH, WITHOUT FIXED LIGHT, WITHOUT HASP, FORMULA 150 FINISH,

3 DOGS, 2 PSI, STEEL

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Origin (Shipping Point)

MILSTRIP: N6275881597459

MFR PART NR: JE200-21821-26

PC NR: MWO

SPEC NR: HULLCVN76

PURCHASE REQUEST NUMBER: N6275881597459

NET AMT

DOOR QUICK ACTING AI

DOOR,QUICK ACTING,AIR TIGHT,

SIZE: 48 INCH X 66 INCH, 3 DOG, 2PSI,

LH, WITHOUT FIXED LIGHT, WITH HASP, FORMULA 150 FINISH

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Origin (Shipping Point)

MILSTRIP: N6275881597460

MFR PART NR: JE200-21821-29

PC NR: MWO

SPEC NR: HULLCVN76

PURCHASE REQUEST NUMBER: N6275881597460

NET AMT

DOOR BALLISTIC QUICK

DOOR,BALLISTIC,QUICK ACTING,

SIZE: 26 INCH X 66 INCH,

RH, 3 DOG, 2PSI, HY100 STEEL,

DWG: 805-1630164

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Origin (Shipping Point)

MILSTRIP: N6275881597461

MFR PART NR: JE200-21821-5

PC NR: MWO

SPEC NR: HULLCVN76

PURCHASE REQUEST NUMBER: N6275881597461

NET AMT

DOOR QUICK ACTING AI

DOOR,QUICK ACTING,AIR TIGHT,

SIZE: 48 INCH X 72 INCH,

3 DOG, 2 PSI, LH, WITHOUT FIXED LIGHT, WITHOUT HASP,

FORMULA 150 FINISH

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Origin (Shipping Point)

MILSTRIP: N6275881597462

MFR PART NR: JE200-21821-30

PC NR: MWO

SPEC NR: HULLCVN76

PURCHASE REQUEST NUMBER: N6275881597462

NET AMT

DOOR BALLISTIC

DOOR,BALLISTIC, AIR TIGHT,

SIZE: 24 INCH X 36 INCH X 20 INCH

LEFT HAND, 2 DOGS, STEEL,

DWG: 124-7386935 REV-B

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Origin (Shipping Point)

MILSTRIP: N6275881597463

MFR PART NR: JE200-21821-54

PC NR: MWO

SPEC NR: HULLCVN76

PURCHASE REQUEST NUMBER: N6275881597463

NET AMT

DOOR QAWT

DOOR,QAWT DOOR

SIZE: 26 INCH X 66 INCH,

LEFT HAND, 8 DOG, STEEL PANEL THICKNESS 0.075 INCH,

IN ACCORDANCE WITH STD ASSEMBLY NO. 19-A OF DWG 806-6397268

DOG ASSY B

LH REGULAR, OPERATING HANDLE ASSY H, LH REGULAR,

HINGE ASSY PP LH LOW TYPE, HASP ASSY EE INSIDE TYPE LH,

GRAB HANDLE-OUTSIDE PC NO. 36A, WITHOUT FIXED LIGHT,

MAX PRESSURE 10 PSI, GAKET MATERIAL SILICONE RUBBER,

SPEC. A-A-59588, CLASS 3B, GRADE 30

BLASTED AND PRIMED ONLY.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Origin (Shipping Point)

MILSTRIP: N6275881597464

MFR PART NR: 803-6397268 ASSY 19-A

PC NR: MWO

SPEC NR: HULLCVN76

PURCHASE REQUEST NUMBER: N6275881597464

NET AMT

DOOR QAWT

DOOR,QAWT DOOR,

SIZE: 26 INCH X 66 INCH,

RIGHT HAND, 8 DOG, STEEL PANEL THICKNESS 0.075 INCH,

IN ACCORDANCE WITH STD ASSEMBLY NO. 20-A OF DWG 806-6397268

DOG ASSY A, B, OPERATING HANDLE ASSY G RH REGULAR,

HINGE ASSY OO RH LOW TYPE, HASP ASSY CC OUTSIDE TYPE AND DD INSIDE TYPE RH, GRAB HANDLE-OUTSIDE PC. NO 36A AND INSIDE PC NO 37A, WITHOUT FIXED LIGHT, MAX PRESSURE 10 PSI, GASKET MATERIAL SILICONERUBBER, SPEC. A-A-59588, CLASS 3B, GRADE 30, BLASTED AND PRIMED ONLY

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Origin (Shipping Point)

MILSTRIP: N6275881597465

MFR PART NR: 803-6397268 ASSY 20-A

PC NR: MWO

SPEC NR: HULLCVN76

PURCHASE REQUEST NUMBER: N6275881597465

NET AMT

DOOR STEEL QAWT

DOOR STEEL QAWT,

SIZE: 36 INCH X 72 INCH,

RIGHT HAND, 8 DOG, STEEL PANEL THICKNESS 0.075 INCH,

SIMILAR TO ASSEMBLY NO. 20-A OF DWG 806-6397268 WITH MOD S PER

DWG 123-7598463. DOG ASSY A, OPERATING HANDLE ASSY G, HINGE ASSEMBLY OO RH LOW TYPE, HASP ASSY CC OUTSIDE TYPE AND DD INSIDE TYPE RH, GRAB HANDLE-OUTSIDE PC. NO 36A AND INSIDE PC NO 37A, WITHOUT FIXED LIGHT, MAX PRESSURE 10 PSI, GASKET MATERIAL SILICONE RUBBER, SPEC. A-A-59588, CLASS 3B, GRADE 30, CLEAR OPENING RADIUS AT BOTTOM OF DOOR TO BE 3 INCHES, SILL HEIGHT TO BE 3 INCHES BOTTOM OF DOOR FRAME

TO BE IN 3 INCHES IN LIEU OF 4-3/4 INCH

DWG 123-7598463

BLASTED AND PRIMED ONLY.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Origin (Shipping Point)

MILSTRIP: N6275881597466

MFR PART NR: 803-6397268 ASSY 20-A MOD

PC NR: MWO

SPEC NR: HULLCVN76

PURCHASE REQUEST NUMBER: N6275881597466

NET AMT

DOOR QAWT

DOOR,QAWT, SIZE: 26 INCH X 66 INCH,

RIGHT HAND, 8 DOG, STEEL PANEL THICKNESS 0.075 INCH,

IN ACCORDANCE WITH SD ASSEMBLY NO. 20-A OF DWG 806-6397268.

DOG ASSY A, B, OPERATING HANDLE ASSY G RH REGULAR,

HINGE ASSY OO RH LOW TYPE,

HASP ASSY CC OUTSIDE TYPE AND DD INSIDE TYPE RH,

GRAB HANDLE-OUTSIDE PC NO 36A AND INSIDE PC NO. 37A,

WITHOUT FIXED LIGHT, MAX PRESSURE 10 PSI, CLASS 3B, GRADE 30,

BLASTED AND PRIMED ONLY.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Origin (Shipping Point)

MILSTRIP: N6275881597467

MFR PART NR: 803-6397268 ASSY 20-A

PC NR: MWO

SPEC NR: HULLCVN76

PURCHASE REQUEST NUMBER: N6275881597467

NET AMT

DOOR STEEL

DOOR,STEEL,

DOG ASSY B LH REGULAR, OPERATING HANDLE ASSY H LH REGULAR,

HINGE ASSY PP LH LOW TYPE, HASP ASSY QUICK ACTING WATERTIGHT DOOR, SIZE: 30 INCH X 66 INCH, LEFT HAND, 8 DOG, STEEL PANEL THICKNESS 0.075 INCH, IN ACCORDANCE WITH STD ASSY NO. 27-A OF DWG 806-6397268, Y EE INSIDE TYPE LH, GRAB HANDLE-OUTSIDE PC NO 36A, WITHOUT FIXED LIGHT, MAX PRESSURE 10 PSI, GASKET MATERIAL SILICONE RUBBER, SPEC. A-A-59588, CLASS 3B, GRADE 30, BLASTED AND PRIMED ONLY.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Origin (Shipping Point)

MILSTRIP: N6275881597468

MFR PART NR: 803-6397268 ASSY 27-A

PC NR: MWO

SPEC NR: HULLCVN76

PURCHASE REQUEST NUMBER: N6275881597468

NET AMT

DOOR QAWT

DOOR,QAWT, SIZE: 26 INCH X 66 INCH, LEFT HAND, 8 DOG,

STEEL PANEL THICKNESS 0.075 INCH,

IN ACCORDANCE WITH STD ASSEMBLY NO. 19-A OF DWG 806-6397268

DOG ASSY B LH REGULAR, OPERATING HANDLE ASSY H LH REGULAR,

HINGE ASSY PP LH LOW TYPE, HASP ASSY EE INSIDE TYPE LH,

GRAB HANDLE-OUTSIDE PC. NO. 36A,

WITHOUT FIXED LIGHT, MAX PRESSURE 10 PSI, GASKET MATERIAL SILICONE RUBBER, SPEC A-A-59588, CLASS 3B, GRADE 30, BLASTED AND PRIMED ONLY.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Origin (Shipping Point)

MILSTRIP: N6275881597469

MFR PART NR: 803-6397268 ASSY 19-A

PC NR: MWO

SPEC NR: HULLCVN76

PURCHASE REQUEST NUMBER: N6275881597469

NET AMT

DOOR QAWT

DOOR,QAWT, SIZE : 26 INCH X 66 INCH, RIGHT HAND, 8 DOG,

STEEL PANEL THICKNESS 0.075 INCH,

IN ACCORDANCE WITH STD ASSEMBLY NO. 20-A OF DWG 806-6397268.

DOG ASSY A, B, OPERATING HANDLE ASSY G RH REGULAR,

HINGE ASSY OO RH LOW TYPE, HASP ASSY CC OUTSIE TYPE AND DD INSIDE TYPE RH. GRAB HANDLE OUTSIE PC NO. 36A AND INSIDE PC NO 37A, WITHOUT FIXED LIGHT, MAX PRESSURE 10 PSI, GASKET MATERIAL: SILICONE RUBBER, SPEC. A-A-59588, CLASS 3B, GRADE 30, BLASTED AND PRIMED ONLY.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Origin (Shipping Point)

MILSTRIP: N6275881597470

MFR PART NR: 803-6397268 ASSY 20-A

PC NR: MWO

SPEC NR: HULLCVN76

PURCHASE REQUEST NUMBER: N6275881597470

NET AMT

DOOR STEEL

DOOR,STEEL, SIZE: 30 INCH X 66 INCH, LEFT HAND, 8 DOG,

STEEL PANEL THICKNESS 0.075 INCH,

IN ACCORDANCE WITH STD ASSEMBLY NO. 27-A OF DWG 806-6397268.

DOG ASSY B LH REGULAR, OPERATING HANDLE ASSY H LH REGULAR,

HINGE ASSY PP LH LOW TYPE, HASP ASSY EE INSIDE TYPE LH,

GRAB HANDLE OUTSIDE PC NO. 36A, WITHOUT FIXED LIGHT,

MAX PRESSURE 10 PSI, GASKET MATERIAL SILICONE RUBBER,

SPEC. A-A-59588, CLASS 3B GRADE 30,

BLASTED AND PRIMED ONLY.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Origin (Shipping Point)

MILSTRIP: N6275881597471

MFR PART NR: 803-6397268 ASSY 27-A

PC NR: MWO

SPEC NR: HULLCVN76

PURCHASE REQUEST NUMBER: N6275881597471

NET AMT

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

DELIVERY INFORMATION

GOVT REPRESENTATIVE

SEE PAGE 4 OF ORDER FOR

SHIPMENT REQUEST PROCEDURES

. WA 00000

FOB: Origin (Shipping Point) N62758

N62758

N62758

N62758

N62758

N62758

N62758

N62758

N62758

N62758

N62758

N62758

N62758

N62758

N62758

N62758

CLAUSES INCORPORATED BY REFERENCE

CLAUSES INCORPORATED BY FULL TEXT

52.209-11 REPRESENTATION BY CORPORATIONS REGARDING DELINQUENT TAX LIABILITY OR A

FELONY CONVICTION UNDER ANY FEDERAL LAW (FEB 2016)

(a) As required by sections 744 and 745 of Division E of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235), and similar provisions, if contained in subsequent appropriations acts, the Government will not enter into a contract with any corporation that--

(1) Has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, where the awarding agency is aware of the unpaid tax liability, unless an agency has considered suspension or debarment of the corporation and made a determination that suspension or debarment is not necessary to protect the interests of the Government; or

(2) Was convicted of a felony criminal violation under any Federal law within the preceding 24 months, where the awarding agency is aware of the conviction, unless an agency has considered suspension or debarment of the corporation and made a determination that this action is not necessary to protect the interests of the Government.

(b) The Offeror represents that--

(1) It is [ ] is not [ ] a corporation that has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability; and

(2) It is [ ] is not [ ] a corporation that was convicted of a felony criminal violation under a Federal law within the preceding 24 months.

(End of provision)

52.211-8 TIME OF DELIVERY (JUN 1997)

(a) The Government requires delivery to be made according to the following schedule:

REQUIRED DELIVERY SCHEDULE

(Contracting Officer insert specific details)

Within 30-45 DAYS AFTER AWARD

After Date

Item No. Quantity of Contract

The Government will evaluate equally, as regards time of delivery, offers that propose delivery of each quantity within the applicable delivery period specified above. Offers that propose delivery that will not clearly fall within the applicable required delivery period specified above, will be considered nonresponsive and rejected. The Government reserves the right to award under either the required delivery schedule or the proposed delivery schedule, when an offeror offers an earlier delivery schedule than required above. If the offeror proposes no other delivery schedule, the required delivery schedule above will apply.

OFFEROR'S PROPOSED DELIVERY SCHEDULE

Within Days

After Date

Item No. Quantity of Contract

(b) Attention is directed to the Contract Award provision of the solicitation that provides that a written award or acceptance of offer mailed, or otherwise furnished to the successful offeror, results in a binding contract. The Government will mail or otherwise furnish to the offeror an award or notice of award not later than the day award is dated. Therefore, the offeror should compute the time available for performance beginning with the actual date of award, rather than the date the written notice of award is received from the Contracting Officer through the ordinary mails. However, the Government will evaluate an offer that proposes delivery based on the Contractor's date of receipt of the contract or notice of award by adding (1) five calendar days for delivery of the award through the ordinary mails, or (2) one working day if the solicitation states that the contract or notice of award will be transmitted electronically. (The term "working day" excludes weekends and U.S. Federal holidays.) If, as so computed, the offered delivery date is later than the required delivery date, the offer will be considered nonresponsive and rejected.

(End of clause)

52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS--COMMERCIAL ITEMS (NOV 2017) ALTERNATE I (OCT 2014)

The offeror shall complete only paragraphs (b) of this provision if the Offeror has completed the annual representations and certification electronically via the System for Award Management (SAM) Web site located at https://www.sam.gov/portal . If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (u) of this provision.

(a) Definitions. As used in this provision-- “Economically disadvantaged women-owned small business (EDWOSB) concern” means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business eligible under the WOSB Program.

“Forced or indentured child labor” means all work or service—

(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or

(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.

“Highest-level owner” means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.

“Immediate owner” means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: Ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.

“Inverted domestic corporation,” means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c).

“Manufactured end product” means any end product in product and service codes (PSCs) 1000-9999, except—

(1) PSC 5510, Lumber and Related Basic Wood Materials;

(2) Product or Service Group (PSG) 87, Agricultural Supplies;

(3) PSG 88, Live Animals;

(4) PSG 89, Subsistence;

(5) PSC 9410, Crude Grades of Plant Materials;

(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) PSC 9610, Ores;

(9) PSC 9620, Minerals, Natural and Synthetic; and

(10) PSC 9630, Additive Metal Materials.

“Place of manufacture” means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

“Restricted business operations” means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate—

(1) Are conducted under contract directly and exclusively with the regional government of southern Sudan;

(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization;

(3) Consist of providing goods or services to marginalized populations of Sudan;

(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;

(5) Consist of providing goods or services that are used only to promote health or education; or

(6) Have been voluntarily suspended.

“Sensitive technology”—

(1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically—

(i) To restrict the free flow of unbiased information in Iran; or

(ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and

(2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)).

“Service-disabled veteran-owned small business concern”—

(1) Means a small business concern—

(i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and

(ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran.

(2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16).

“Small business concern” means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR Part 121 and size standards in this solicitation.

“Small disadvantaged business concern, consistent with 13 CFR 124.1002,” means a small business concern under the size standard applicable to the acquisition, that--

(1) Is at least 51 percent unconditionally and directly owned (as defined at 13 CFR 124.105) by--

(i) One or more socially disadvantaged (as defined at 13 CFR 124.103) and economically disadvantaged (as defined at 13 CFR 124.104) individuals who are citizens of the United States; and

(ii) Each individual claiming economic disadvantage has a net worth not exceeding $750,000 after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2); and

(2) The management and daily business operations of which are controlled (as defined at 13.CFR 124.106) by individuals, who meet the criteria in paragraphs (1)(i) and (ii) of this definition.

“Subsidiary” means an entity in which more than 50 percent of the entity is owned—

(1) Directly by a parent corporation; or

(2) Through another subsidiary of a parent corporation.

“Veteran-owned small business concern” means a small business concern—

(1) Not less than 51 percent of which is owned by one or more veterans(as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and

(2) The management and daily business operations of which are controlled by one or more veterans.

“Women-owned business concern” means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of the its stock is owned by one or more women; and whose management and daily business operations are controlled by one or more women.

“Women-owned small business concern” means a small business concern --

(1) That is at least 51 percent owned by one or more women or, in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and

(2) Whose management and daily business operations are controlled by one or more women.

“Women-owned small business (WOSB) concern eligible under the WOSB Program (in accordance with 13 CFR part 127),” means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States.

(b)

(1) Annual Representations and Certifications. Any changes provided by the offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications posted on the SAMwebsite.

(2) The offeror has completed the annual representations and certifications electronically via the SAM website accessed through https://www.acquisition.gov. After reviewing the SAM database information, the offeror verifies by submission of this offer that the representation and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications—Commercial Items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs ___ . [Offeror to identify the applicable paragraphs at (c) through (u) of this provision that the offeror has completed for the purposes of this solicitation only, if any. These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer. Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted electronically on SAM.]

(c) Offerors must complete the following representations when the resulting contract is to be performed in the United States or its outlying areas. Check all that apply.

(1) Small business concern. The offeror represents as part of its offer that it [ ___ ] is, [ ___ ] is not a small business concern.

(2) Veteran-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents as part of its offer that it [ ___ ] is, [ ___ ] is not a veteran-owned small business concern.

(3) Service-disabled veteran-owned small business concern. [Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.] The offeror represents as part of its offer that it [ ___ ] is, [ ___ ] is not a service-disabled veteran-owned small business concern.

(4) Small disadvantaged business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.]The offeror represents that it [ ___ ] is, [ ___ ] is not, a small disadvantaged business concern as defined in 13 CFR 124.1002.

(5) Women-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.]The offeror represents that it [ ___ ] is, [ ___ ] is not a women-owned small business concern.

Note: Complete paragraphs (c)(8) and (c)(9) only if this solicitation is expected to exceed the simplified acquisition threshold.

(6) WOSB concern eligible under the WOSB Program. [Complete only if the offeror represented itself as a women-owned small business concern in paragraph (c)(5) of this provision.] The offeror represents that—

(i) It [ ___ ] is, [ ___ ] is not a WOSB concern eligible under the WOSB Program, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and

(ii) It [ ___ ] is, [ ___ ] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(6)(i) of this provision is accurate for each WOSB concern eligible under the WOSB Program participating in the joint venture. [The offeror shall enter the name or names of the WOSB concern eligible under the WOSB Program and other small businesses that are participating in the joint venture: ___ .] Each WOSB concern eligible under the WOSB Program participating in the joint venture shall submit a separate signed copy of the WOSB representation.

(7) Economically disadvantaged women-owned small business (EDWOSB) concern. [Complete only if the offeror represented itself as a WOSB concern eligible under the WOSB Program in (c)(6) of this provision.] The offeror represents that—

(i) It [ ___ ] is, [ ___ ] is not an EDWOSB concern, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and

(ii) It [ ___ ] is, [ ___ ] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(7)(i) of this provision is accurate for each EDWOSB concern participating in the joint venture. [The offeror shall enter the name or names of the EDWOSB concern and other small businesses that are participating in the joint venture: ___ .] Each EDWOSB concern participating in the joint venture shall submit a separate signed copy of the EDWOSB representation.

(8) Women-owned business concern (other than small business concern). [Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it [ ___ ] is, a women-owned business concern.

(9) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price:

(10) HUBZone small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, as part of its offer, that--

(i) It [ ___ ] is, [ ___ ] is not a HUBZone small business concern listed, on the date of this representation, on the List of Qualified HUBZone Small Business Concerns maintained by the Small Business Administration, and no material changes in ownership and control, principal office, or HUBZone employee percentage have occurred since it was certified in accordance with 13 CFR part 126; and

(ii) It [ ___ ] is, [ ___ ] is not a HUBZone joint venture that complies with the requirements of 13 CFR part 126, and the representation in paragraph (c)(10)(i) of this provision is accurate for each HUBZone small business concern participating in the HUBZone joint venture. [The offeror shall enter the names of each of the HUBZone small business concerns participating in the HUBZone joint venture: ___ .] Each HUBZone small business concern participating in the HUBZone joint venture shall submit a separate signed copy of the HUBZone representation.

(11) (Complete if the offeror has represented itself as disadvantaged in paragraph (c)(4) of this provision.)

[The offeror shall check the category in which its ownership falls]:

___ Black American.

___ Hispanic American.

___ Native American (American Indians, Eskimos, Aleuts, or Native Hawaiians).

___ Asian-Pacific American (persons with origins from Burma, Thailand, Malaysia, Indonesia, Singapore, Brunei, Japan, China, Taiwan, Laos, Cambodia (Kampuchea), Vietnam, Korea, The Philippines, Republic of Palau, Republic of the Marshall Islands, Federated States of Micronesia, the Commonwealth of the Northern Mariana Islands, Guam, Samoa, Macao, Hong Kong, Fiji, Tonga, Kiribati, Tuvalu, or Nauru).

___ Subcontinent Asian (Asian-Indian) American (persons with origins from India, Pakistan, Bangladesh, Sri Lanka, Bhutan, the Maldives Islands, or Nepal).

___ Individual/concern, other than one of the preceding.

(d) Representations required to implement provisions of Executive Order 11246 --

(1) Previous contracts and compliance. The offeror represents that --

(i) It [ ___ ] has, [ ___ ] has not, participated in a previous contract or subcontract subject to the Equal Opportunity clause of this solicitation; and

(ii) It [ ___ ] has, [ ___ ] has not, filed all required compliance reports.

(2) Affirmative Action Compliance. The offeror represents that --

(i) It [ ___ ] has developed and has on file, [ ___ ] has not developed and does not have on file, at each establishment, affirmative action programs required by rules and regulations of the Secretary of Labor (41 CFR parts 60-1 and 60-2), or

(ii) It [ ___ ] has not previously had contracts subject to the written affirmative action programs requirement of the rules and regulations of the Secretary of Labor.

(e) Certification Regarding Payments to Influence Federal Transactions (31 U.S.C. 1352). (Applies only if the contract is expected to exceed $150,000.) By submission of its offer, the offeror certifies to the best of its knowledge and belief that no Federal appropriated funds have been paid or will be paid to any person for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or employee of Congress or an employee of a Member of Congress on his or her behalf in connection with the award of any resultant contract. If any registrants under the Lobbying Disclosure Act of 1995 have made a lobbying contact on behalf of the offeror with respect to this contract, the offeror shall complete and submit, with its offer, OMB Standard Form LLL, Disclosure of Lobbying Activities, to provide the name of the registrants. The offeror need not report regularly employed officers or employees of the offeror to whom payments of reasonable compensation were made.

(f) Buy American Certificate. (Applies only if the clause at Federal Acquisition Regulation (FAR) 52.225-1, Buy American – Supplies, is included in this solicitation.)

(1) The offeror certifies that each end product, except those listed in paragraph (f)(2) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of “domestic end product.” The terms “commercially available off-the-shelf (COTS) item,” “component,” “domestic end product,” “end product,” “foreign end product,” and “United States” are defined in the clause of this solicitation entitled “Buy American—Supplies.”

(2) Foreign End Products:

[List as necessary]

(3) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25.

(g)

(1) Buy American -- Free Trade Agreements -- Israeli Trade Act Certificate. (Applies only if the clause at FAR 52.225-3, Buy American -- Free Trade Agreements -- Israeli Trade Act, is included in this solicitation.)

(i) The offeror certifies that each end product, except those listed in paragraph (g)(1)(ii) or (g)(1)(iii) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The terms “Bahrainian, Moroccan, Omani, Panamanian, or Peruvian end product,” “commercially available off-the-shelf (COTS) item,” “component,” “domestic end product,” “end product,” “foreign end product,” “Free Trade Agreement country,” “Free Trade Agreement country end product,” “Israeli end product,” and “United States” are defined in the clause of this solicitation entitled “Buy American--Free Trade Agreements--Israeli Trade Act.”

(ii) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahrainian, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled “Buy American—Free Trade Agreements—Israeli Trade Act”:

Free Trade Agreement Country End Products (Other than Bahrainian, Moroccan, Omani, Panamanian, or Peruvian End Products) or Israeli End Products:

(iii) The offeror shall list those supplies that are foreign end products (other than those listed in paragraph (g)(1)(ii) or this provision) as defined in the clause of this solicitation entitled “Buy American—Free Trade Agreements—Israeli Trade Act.” The offeror shall list as other foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of “domestic end product.”

Other Foreign End Products:

(iv) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25.

(2) Buy American—Free Trade Agreements—Israeli Trade Act Certificate, Alternate I. If Alternate I to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision:

(g)(1)(ii) The offeror certifies that the following supplies are Canadian end products as defined in the clause of this solicitation entitled “Buy American—Free Trade Agreements—Israeli Trade Act”:

Canadian End Products:

Line Item No.:

[List as necessary]

(3) Buy American—Free Trade Agreements—Israeli Trade Act Certificate, Alternate II. If Alternate II to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision:

(g)(1)(ii) The offeror certifies that the following supplies are Canadian end products or Israeli end products as defined in the clause of this solicitation entitled “Buy American--Free Trade Agreements--Israeli Trade Act'':

Canadian or Israeli End Products:

(4) Buy American—Free Trade Agreements—Israeli Trade Act Certificate, Alternate III. If Alternate III to the clause at 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision:

(g)(1)(ii) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahrainian, Korean, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled “Buy American—Free Trade Agreements—Israeli Trade Act”:

Free Trade Agreement Country End Products (Other than Bahrainian, Korean, Moroccan, Omani, Panamanian, or Peruvian End Products) or Israeli End Products:

(5) Trade Agreements Certificate. (Applies only if the clause at FAR 52.225-5, Trade Agreements, is included in this solicitation.)

(i) The offeror certifies that each end product, except those listed in paragraph (g)(5)(ii) of this provision, is a U.S.-made or designated country end product as defined in the clause of this solicitation entitled “Trade Agreements.”

(ii) The offeror shall list as other end products those end products that are not U.S.-made or designated country end products.

Other End Products

(iii) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. For line items covered by the WTO GPA, the Government will evaluate offers of U.S.-made or designated country end products without regard to the restrictions of the Buy American statute. The Government will consider for award only offers of U.S.-made or designated country end products unless the Contracting Officer determines that there are no offers for such products or that the offers for such products are insufficient to fulfill the requirements of the solicitation.

(h) Certification Regarding Responsibility Matters (Executive Order 12689). (Applies only if the contract value is expected to exceed the simplified acquisition threshold.) The offeror certifies, to the best of its knowledge and belief, that the offeror and/or any of its principals--

(1) [ ___ ] Are, [ ___ ] are not presently debarred, suspended, proposed for debarment, or declared ineligible for the award of contracts by any Federal…