N00406-24-Q-0478 SERVICE TECH.pdf

PDF 3 MB Posted

Attached to
SERVICE TECH Federal contract opportunity
Solicitation number
N0040624Q0478
Issued by
Department of the Navy Naval Supply Systems Command

About this file

This document is a solicitation (N0040624Q0478) for the procurement of REPAIR SERVICES TO ROLLS-ROYCE FOR STBD CPP SYSTEM in support of SRF SASEBO JAPAN. The Government anticipates awarding a firm, fixed price contract as a result of this solicitation. The solicitation states that only quotes from certified distributors and authorized service technicians of Rolls-Royce will be accepted, as this is a sole source requirement. The deadline for submission of questions is 4 days prior to the solicitation's closing date of 12:00 PM on 04/19/2024. The Government will award on the basis of price, unless past performance information indicates the low price may not represent best value. The solicitation includes a Performance Work Statement detailing the required on-site service to disassemble, inspect, reassemble and flush the CPP system that interfaces with the MRG.

View the file

Other files for this federal contract opportunity

Other files attached to SERVICE TECH, newest first.
File Type Posted
N6275824RCPS026 SOW.pdf PDF

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

SEE ADDENDUM

(No Collect Calls)

N0040624Q0478 10-Apr-2024

b. TELEPHONE NUMBER

360-476-4473

8. OFFER DUE DATE/LOCAL TIME

12:00 PM 19 Apr 2024

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

N004069. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

JENNIFER L. BOYLE

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

0 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

N6275824RCPS026

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED ORX

SMALL BUSINESS

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

NAVSUP FLC PUGET SOUND

467 W STREET, 2ND FLR

ATTN: JENNIFER L. BOYLE

BREMERTON WA 98314

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE 16. ADMINISTERED BY

SEE SCHEDULE

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

FAX:

TEL: 360-476-4473 SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

1,300

NAICS:

336611

X

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF46

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

N0040624Q0478

Section SF 30 - BLOCK 14 CONTINUATION PAGE

NOTICE TO INTERESTED PARTIES

1. NOTICE TO ALL OFFERORS: The Government anticipates awarding a firm, fixed price contract in response to quotes/proposals received to this solicitation. As a result, the contract's pricing will not be subject to any adjustment on the basis of the contractor's increased costs due to COVID-19 and/or inflationary causes experienced during contract performance. Because a firm, fixed price contract places the maximum risk and full responsibility for all costs and resulting profit or loss on the contractor, offerors are advised to consider these risks when pricing their quotes/proposals.

1. This solicitation is for the procurement of REPAIR SERVICES TO ROLLS-ROYCE FOR STBD CPP

SYSTEM in support of SRF SASEBO JAPAN. It is anticipated that this solicitation will result in an award of a Firm, Fixed-Price Service type contract.

2. The entire solicitation shall be filled out, signed, and returned as part of your quote. See block 8 on page 1 of the solicitation for the closing date and time.

3. The deadline for submission of questions regarding the solicitation’s terms, conditions, specifications, and/or the statement of work (SOW) / performance work statement (PWS) is 4 days prior to the solicitation’s closing date.

4. The Government will award on the basis of price unless the contracting officer is aware of past performance information related to the low price quote/offer which indicates that quote/offer may not represent best value. In that case, the Government reserves the right to consider the past performance of other quotes/offers, conduct a price, past performance tradeoff, and award to other than the lowest price quote/offer.

5. SINGLE AWARD FOR ALL ITEMS: Due to the interrelationship of supplies and/or services to be provided hereunder, the Government reserves the right to make a single award to the quoter whose quote is considered in the best interest of the government, price and other factors considered. Therefore, quoters who quote less than the entire effort specified herein may be determined to be unacceptable.

6. “EXCEPTIONS: All quoters MUST note all exceptions from the solicitation’s terms conditions, specifications, and/or the statement of work / performance work statement, if any. It will be assumed that any quote without mention of any exceptions will take no exception from all specifications, terms and conditions, clauses, or provisions within the solicitation.”

7. All questions in regards to this solicitation shall be submitted, via email, to the Purchasing Agent / Contract

Specialist (listed below):

Name: JENNIFER BOYLE Phone: 360-476-4473 Email: JENNIFER.L.BOYLE16.CIV@US.NAVY.MIL

PLEASE PROVIDE:

COMPANY NAME: __________________________________________________________

SAM CAGE CODE NUMBER: ____________________________________________

POC NAME: _______________________________________________

E-MAIL ADDRESS: ________________________________________

PHONE NUMBER: _________________________________________

LIST THE MFG AND COUNTRY OF ORIGIN:_______________________________

LIST YOUR COMPANIES SIZE: LARGE OR SMALL

CLAUSES 52.204-24, 52.204-26 & 52.209-11 MUST BE FILLED OUT

THIS IS A SOLE SOURCE REQUIREMENT TO ROLLS-ROYCE, ONLY QUOTES FROM

CERTIFIED DISTRIBUTORS AND AUTHORISED SERVICE TECHNITIONS WILL BE

ACCEPTED.

(YOUR COMPANY MUST BE REGISTERED WITH **SAM** (SYSTEM AWARD FOR

MANAGEMENT** IN ORDER TO RECEIVE A GOVERNMENT AWARD) (SAM REGISTRATION IS

FREE)

INTERNET ADDRESS FOR SAM IS: https://www.sam.gov

Government terms and conditions will be followed.

PAYMENT INFORMATION WILL BE ENTERED IN ANY RESULTING AWARD BY:

WIDE AREA WORK FLOW PAYMENT:

The contractor shall utilize the electronic invoicing upon delivery of supplies indicated herein. Invoices must be submitted electronically using Wide Area Work Flow (WAWF) – Receipt and Acceptance. The contractor shall self-register at the web site: https://wawf.eb.mil . Contractor training is available on the Internet at https://wawftrainingeb.mil . Additional support can be accessed by calling the NAVY WAWF Assistance Line:

1-866-618-5988

***NOTICE***

NOTICE TO CONTRACTORS: Information for Contractor Employees Seeking to Enter Japan

1. The following is provided for the information of contractors to the U.S. Navy whose employees need to enter Japan to perform contract requirements. The information is current as of February 2023. While the information is believed to be accurate, policies and procedures are continuing to change on a regular basis.

2. See https://www.japan.travel/en/coronavirus/ for a list of the current restrictions and COVID entry procedures.

3. All contractor personnel arriving in Japan should utilize the process outlined in the attached USFJ Instruction to ensure they are recognized as members of the civilian component under Article 1.b. of the SOFA. The process requires that a contractor contact the contracting officer for the contract on which its employee will perform in Japan prior to the employee traveling to Japan. Contact is made through the Synchronized Pre-deployment and Operational Tracker (SPOT) system. The contractor will provide information to the contracting officer about the traveling employee. Following review, the contracting officer will issue the contractor a Letter of Authorization (LOA). The incoming contractor employee will hand carry a copy of the LOA and show it to the Japanese immigration authority at the port of entry as evidence of SOFA status.

Contractors who do not have current access to SPOT should contact their contracting officer for information about accessing SPOT.

4. This memo is intended to provide current information for contractors whose employees need to enter Japan to perform contract requirements. Nothing in the memo should be understood to change the terms or conditions of an existing contract. Any such changes must be made by an authorized contracting officer.

5. This memo is intended to provide current information for contractors whose employees need to enter Japan to perform contract requirements. Nothing in the memo should be understood to change the terms or conditions of an existing contract. Any such changes must be made by an authorized contracting officer.

CONTRACTOR TRAVEL REQUIREMENTS

1. PURPOSE OF THIS MESSAGE IS TO PROVIDE GUIDANCE TO SYSCOMS, WARFARE CENTERS AND

CONTRACTING ACTIVITIES RESPONSIBLE FOR THE COORDINATION OF SHIP REPAIR AND

MODERNIZATION EFFORTS IN JAPAN. GUIDANCE ISO DOD AND INTERNATIONAL RESTRICTIONS

AS A RESULT OF COVID-19 MITIGATION ACTIONS. SRF-JRMC IS UTILIZING THE FUNCTIONALITY

OF THE REGIONAL MAINTENANCE AND MODERNIZATION COORDINATION OFFICE (RMMCO)

IDENTIFIED IN REFS (A) AND (B) TO MANAGE THESE UNIQUE TRAVEL REQUIREMENTS.

2. ANY PERSONNEL SUPPORTING SRF-JRMC MAINTENANCE AND MODERNIZATION SHALL

COMPLY WITH THE GUIDANCE PROVIDED OR RISK DENIAL OF ENTRY TO JAPAN AND/OR

COMMANDER FLEET ACTIVITIES YOKOSUKA (CFAY) OR COMMANDER FLEET ACTIVITIES SASEBO

(CFAS). DUE TO COVID-19 RESTRICTIONS, ENTRY REQUIREMENTS TO JAPAN IN SUPPORT OF

MISSION ESSENTIAL MAINTENANCE/MODERNIZATION IN WHICH SRF-JRMC SERVES AS THE

NAVAL SUPERVISORY AUTHORITY (NSA) ARE AS FOLLOWS (PRE-DEPARTURE):

A. APPROVAL MUST BE OBTAINED THROUGH AIRCRAFT AND PERSONNEL AUTOMATED

CLEARANCE SYSTEM (APACS) FOR ENTRY TO INDOPACOM AOR. (FOR SRF-JRMC SPONSORED

WORK, SEA21 WILL PROVIDE O7 APPROVAL. ALL OTHER SPONSORS WILL OBTAIN O7 LEVEL

APPROVAL VIA THEIR COC). HTTPS:APACS.MILCLOUD.MIL

B. PERSONNEL MUST HAVE A VALID PASSPORT FOR THE INTENDED PERIOD OF STAY IN

JAPAN.

C. PERSONNEL MUST CONTACT THE SRF-JRMC YOKOSUKA OR SASEBO RMMCO OFFICE AT

DIST-RMMCO-YOKOSUKA@SRF.NAVY.MIL OR DIST-RMMCO-SASEBO@SRF.NAVY.MIL,

RESPECTIVELY, FOR ARRIVAL PREPARATIONS AND VERIFICATION OF REQUIREMENTS.

D. A PRE-DEPARTURE HEALTH SCREENING OF ALL TRAVELERS WILL BE ACCOMPLISHED

ICW RMMCO PRIOR TO BEING PERMITTED TO COMMENCE TRAVEL.

E. UPON RMMCO VERIFICATION ALL TRAVEL REQUIREMENTS ARE MET, SRF-JRMC WILL

ISSUE A SERIALIZED GOVERNMENT OF JAPAN (GOJ) APPROVAL LETTER TO ACCOMPANY ALL

OTHER REQUIRED DOCUMENTS. THESE DOCUMENTS WILL BE PRESENTED TO JAPANESE

IMMIGRATION OFFICIALS UPON ARRIVAL AT PORT OF ENTRY. CURRENT AUTHORIZED PORT OF

ENTRIES INCLUDE COMMERCIAL AIRPORTS AT TOKYO (NRT OR HND) AND MILAIR VIA YOKOTA

AND OTHER LOCATIONS APPROVED BY C7F OR CPF.

3. UPON COMMENCING TRAVEL, THE FOLLOWING POST-DEPARTURE REQUIREMENTS ARE IN

EFFECT:

A. TRANSPORTATION FROM THE PORT OF ENTRY TO CFAY OR CFAS WILL BE COORDINATED

THROUGH THE RMMCO OFFICE. RMMCO OFFICE WILL PROVIDE GOVERNMENT

TRANSPORTATION INFORMATION ONLY. TRANSPORTATION WILL BE VIA GOVERNMENT

TRANSPORTATION AND SHALL NOT INCLUDE USE OF PUBLIC TRANSPORTATION BETWEEN PORT

OF ENTRY AND LOCAL ROM LOCATION. IT IS THE TRAVELER?S RESPONSIBILITY TO ARRANGE

GOVERNMENT TRANSPORTATION FROM PORT OF ENTRY TO CFAY OR CFAS.

1. COMMON ACCESS CARD (IF GOVERNMENT EMPLOYEE)

2. REGISTRATION IN DBIDS. INDICATION AS MISSION ESSENTIAL BASED ON HPCON LEVEL.

3. VISIT REQUEST VIA JPAS.

4. GOVERNMENT ORDERS (IF GOVERNMENT EMPLOYEE) OR LETTER OF IDENTIFICATION (IF

CONTRACTOR EMPLOYEE). THESE DOCUMENTS SHOULD INDICATE MISSION ESSENTIAL NATURE

OF WORK.

5. SATISFACTORY DAILY HEALTH SCREEN.

B. COMMENCE WORK THROUGH WORK COMPLETION PERIOD. DAILY HEALTH SCREENINGS WILL

BE REQUIRED TO BE CONDUCTED BY EACH TRAVELERS ONSITE LEAD AND REPORTED TO THE

RMMCO OFFICE. ADDITIONAL SCREENINGS BY BASE/SHIP PERSONNEL ARE LIKELY AND MAY

INCLUDE TEMPERATURE CHECKS. IF AT ANY TIME A TRAVELER SHOWS INDICATIONS OF ILI,

THEY SHOULD RETURN/REMAIN AT THEIR TEMPORARY LODGING AND REPORT STATUS TO

RMMCO. UPON COMPLETION OF WORK, TRAVELERS SHALL REPORT AND CHECKOUT WITH THE

RMMCO OFFICE TO FACILITATE GOVERNMENT TRANSPORTATION AS WELL AS ANY ADDITIONAL

PERMISSIONS REQUIRED FOR EXITING.

4. ADDITIONAL REQUIREMENTS:

A. IAW REF A, AITS ARE REQUIRED TO START RMMCO CHECK-IN PROCESS PRIOR TO

ARRIVAL IN JAPAN. RMMCO YOKOSUKA POCS ARE MARIA HIDALGO AND RICHARD PETERS, DSN

(315)243-0994, EMAIL: DIST-RMMCO-YOKOSUKA@SRF.NAVY.MIL. RMMCO SASEBO POCS ARE

THOMAS BUCK AND LEONARDERIC MANALO,

DSN (315)252-6602/2805, EMAIL: DIST-RMMCO-SASEBO@SRF.NAVY.MIL

B. IAW REF C, COUNTRY CLEARANCE REQUESTS ARE TO BE SUBMITTED A MINIMUM OF 30

DAYS PRIOR TO TRAVEL.

C. ANY VISITOR/TRAVELER ENTERING CFAY/CFAS IS SUBJECT TO DEBARMENT FROM BASE

AND REVOCATION OF VISIT CLEARANCE IF FOUND IN VIOLATION OF ROM AND OR SHELTER IN

PLACE REQUIREMENTS. VISITORS SUPPORTING SRF-JRMC MAINTENANCE REQUIREMENTS ARE

EXPECTED TO LIMIT TRAVEL TO THE MINIMUM REQUIRED BETWEEN THEIR LODGING FACILITY

TO THE WORK SITE AND RETURN. STOPS FOR SELF-CARE ITEMS AND FOOD PERMITTED WITHIN

REASON AND WITH PROPER SOCIAL DISTANCING PROTOCOLS FOLLOWED.

ROLLS-ROYCE TERMS & CONDITIONS

52.212-4 CONTRACT TERMS AND CONDITIONS-- COMMERCIAL ITEMS (OCT 2018)

(a) Inspection/Acceptance. The Contractor shall only tender for acceptance those items that conform to the requirements of this contract. The Government reserves the right to inspect or test any supplies or services that have been tendered for acceptance. The Government may require repair or replacement of nonconforming supplies or reperformance of nonconforming services at no increase in contract price. If repair/replacement or reperformance will not correct the defects or is not possible, the Government may seek an equitable price reduction or adequate consideration for acceptance of nonconforming supplies or services. The Government must exercise its post-acceptance rights (1) Within 30 days after the defect was discovered or should have been discovered; and (2) before any substantial change occurs in the condition of the item, unless the change is due to the defect in the item.

(b) Assignment. The Contractor or its assignee may assign its rights to receive payment due as a result of performance of this contract to a bank, trust company, or other financing institution, including any Federal lending agency in accordance with the Assignment of Claims Act (31 U.S.C. 3727). However, when a third party makes payment (e.g., use of the Governmentwide commercial purchase card), the Contractor may not assign its rights to receive payment under this contract.

(c) Changes. Changes in the terms and conditions of this contract may be made only by written agreement of the parties.

(d) Disputes. This contract is subject to 41 U.S.C. chapter 71, Contract Disputes'', as amended (41 U.S.C. 601-613).

Failure of the parties to this contract to reach agreement on any request for equitable adjustment, claim, appeal or action arising under or relating to this contract shall be a dispute to be resolved in accordance with the clause at FAR 52.233-1, Disputes, which is incorporated herein by reference. The Contractor shall proceed diligently with performance of this contract, pending final resolution of any dispute arising under the contract.

(e) Definitions. The clause at FAR 52.202-1, Definitions, is incorporated herein by reference.

(f) Excusable delays. The Contractor shall be liable for default unless nonperformance is caused by an occurrence beyond the reasonable control of the Contractor and without its fault or negligence such as, acts of God or the public enemy, acts of the Government in either its sovereign or contractual capacity, fires, floods, epidemics, quarantine restrictions, strikes, unusually severe weather, and delays of common carriers. The Contractor shall notify the Contracting Officer in writing as soon as it is reasonably possible after the commencement or any excusable delay, setting forth the full particulars in connection therewith, shall remedy such occurrence with all reasonable dispatch and shall promptly give written notice to the Contracting Officer of the cessation of such occurrence.

(g) Invoice.

(1) The Contractor shall submit an original invoice and three copies (or electronic invoice, if authorized) to the address designated in the contract to receive invoices. An invoice must include--

(i) Name and address of the Contractor;

(ii) Invoice date and number;

(iii) Contract number, line item number and, if applicable, the order number;

(iv) Description, quantity, unit of measure, unit price and extended price of the items delivered;

(v) Shipping number and date of shipment, including the bill of lading number and weight of shipment if shipped on Government bill of lading;

(vi) Terms of any discount for prompt payment offered;

(vii) Name and address of official to whom payment is to be sent;

(viii) Name, title, and phone number of person to notify in event of defective invoice; and

(ix) Taxpayer Identification Number (TIN). The Contractor shall include its TIN on the invoice only if required elsewhere in this contract.

(x) Electronic funds transfer (EFT) banking information.

(A) The Contractor shall include EFT banking information on the invoice only if required elsewhere in this contract.

(B) If EFT banking information is not required to be on the invoice, in order for the invoice to be a proper invoice, the Contractor shall have submitted correct EFT banking information in accordance with the applicable solicitation provision, contract clause (e.g., 52.232-33, Payment by Electronic Funds Transfer—System for Award Management, or 52.232-34, Payment by Electronic Funds Transfer--Other Than System for Award Management), or applicable agency procedures.

(C) EFT banking information is not required if the Government waived the requirement to pay by EFT.

(2) Invoices will be handled in accordance with the Prompt Payment Act (31 U.S.C. 3903) and Office of Management and Budget (OMB) prompt payment regulations at 5 CFR part 1315.

(h) Patent indemnity. The Contractor shall indemnify the Government and its officers, employees and agents against liability, including costs, for actual or alleged direct or contributory infringement of, or inducement to infringe, any United States or foreign patent, trademark or copyright, arising out of the performance of this contract, provided the Contractor is reasonably notified of such claims and proceedings.

(i) Payment.--

(1) Items accepted. Payment shall be made for items accepted by the Government that have been delivered to the delivery destinations set forth in this contract.

(2) Prompt payment. The Government will make payment in accordance with the Prompt Payment Act (31 U.S.C.

3903) and prompt payment regulations at 5 CFR part 1315.

(3) Electronic Funds Transfer (EFT). If the Government makes payment by EFT, see 52.212-5(b) for the appropriate EFT clause.

(4) Discount. In connection with any discount offered for early payment, time shall be computed from the date of the invoice. For the purpose of computing the discount earned, payment shall be considered to have been made on the date which appears on the payment check or the specified payment date if an electronic funds transfer payment is made.

(5) Overpayments. If the Contractor becomes aware of a duplicate contract financing or invoice payment or that the Government has otherwise overpaid on a contract financing or invoice payment, the Contractor shall--

(i) Remit the overpayment amount to the payment office cited in the contract along with a description of the overpayment including the--

(A) Circumstances of the overpayment (e.g., duplicate payment, erroneous payment, liquidation errors, date(s) of overpayment);

(B) Affected contract number and delivery order number, if applicable;

(C) Affected line item or subline item, if applicable; and

(D) Contractor point of contact.

(ii) Provide a copy of the remittance and supporting documentation to the Contracting Officer.

(6) Interest.

(i) All amounts that become payable by the Contractor to the Government under this contract shall bear simple interest from the date due until paid unless paid within 30 days of becoming due. The interest rate shall be the interest rate established by the Secretary of the Treasury as provided in 41 U.S.C.

7109, which is applicable to the period in which the amount becomes due, as provided in (i)(6)(v) of this clause, and then at the rate applicable for each six-month period as fixed by the Secretary until the amount is paid.

(ii) The Government may issue a demand for payment to the Contractor upon finding a debt is due under the contract.

(iii) Final decisions. The Contracting Officer will issue a final decision as required by 33.211 if--

(A) The Contracting Officer and the Contractor are unable to reach agreement on the existence or amount of a debt within 30 days;

(B) The Contractor fails to liquidate a debt previously demanded by the Contracting Officer within the timeline specified in the demand for payment unless the amounts were not repaid because the Contractor has requested an installment payment agreement; or

(C) The Contractor requests a deferment of collection on a debt previously demanded by the Contracting Officer (see 32.607-2).

(iv) If a demand for payment was previously issued for the debt, the demand for payment included in the final decision shall identify the same due date as the original demand for payment.

(v) Amounts shall be due at the earliest of the following dates:

(A) The date fixed under this contract.

(B) The date of the first written demand for payment, including any demand for payment resulting from a default termination.

(vi) The interest charge shall be computed for the actual number of calendar days involved beginning on the due date and ending on--

(A) The date on which the designated office receives payment from the Contractor;

(B) The date of issuance of a Government check to the Contractor from which an amount otherwise payable has been withheld as a credit against the contract debt; or

(C) The date on which an amount withheld and applied to the contract debt would otherwise have become payable to the Contractor.

(vii) The interest charge made under this clause may be reduced under the procedures prescribed in 32.608-2 of the Federal Acquisition Regulation in effect on the date of this contract.

(j) Risk of loss. Unless the contract specifically provides otherwise, risk of loss or damage to the supplies provided under this contract shall remain with the Contractor until, and shall pass to the Government upon:

(1) Delivery of the supplies to a carrier, if transportation is f.o.b. origin; or

(2) Delivery of the supplies to the Government at the destination specified in the contract, if transportation is f.o.b.

destination.

(k) Taxes. The contract price includes all applicable Federal, State, and local taxes and duties.

(l) Termination for the Government's convenience. The Government reserves the right to terminate this contract, or any part hereof, for its sole convenience. In the event of such termination, the Contractor shall immediately stop all work hereunder and shall immediately cause any and all of its suppliers and subcontractors to cease work. Subject to the terms of this contract, the Contractor shall be paid a percentage of the contract price reflecting the percentage of the work performed prior to the notice of termination, plus reasonable charges the Contractor can demonstrate to the satisfaction of the Government using its standard record keeping system, have resulted from the termination. The Contractor shall not be required to comply with the cost accounting standards or contract cost principles for this purpose. This paragraph does not give the Government any right to audit the Contractor's records. The Contractor shall not be paid for any work performed or costs incurred which reasonably could have been avoided.

(m) Termination for cause. The Government may terminate this contract, or any part hereof, for cause in the event of any default by the Contractor, or if the Contractor fails to comply with any contract terms and conditions, or fails to provide the Government, upon request, with adequate assurances of future performance. In the event of termination for cause, the Government shall not be liable to the Contractor for any amount for supplies or services not accepted, and the Contractor shall be liable to the Government for any and all rights and remedies provided by law. If it is determined that the Government improperly terminated this contract for default, such termination shall be deemed a termination for convenience.

(n) Title. Unless specified elsewhere in this contract, title to items furnished under this contract shall pass to the Government upon acceptance, regardless of when or where the Government takes physical possession.

(o) Warranty. (a) For Parts manufactured by Seller, Seller warrants that at time of delivery each Part shall be free from any defects in material and workmanship. The Buyer shall promptly notify Seller of any defect that occurs during the period of this warranty and make the Parts available for correction. The obligation of Seller and the remedy of Buyer is limited to the replacement or repair of any Part or Parts, at the Seller’s discretion, which are claimed by Buyer to have been defective, and this obligation shall expire at the end of six (6) months from the date the Part is put into service, but in no event later than twelve (12) months from the date of delivery of the Part. The warranty period of any such repaired or replaced component of Part shall be the unexpired portion of the warranty on the component of Part replaced. (b) For Parts not manufactured by Seller (furnished by Seller at the request of Buyer), the obligation of the Seller is limited to the warranty offered by the manufacturer of the Part. (c) Seller has fulfilled its obligation to repair or replace a defective part under this warranty when it delivers to the Buyer a duly repaired or replaced Part. Seller shall not be responsible for removal, replacement or loss of use of Government equipment or systems.

(p) Limitation of liability.

(q) Other compliances. The Contractor shall comply with all applicable Federal, State and local laws, executive orders, rules and regulations applicable to its performance under this contract.

(r) Compliance with laws unique to Government contracts. The Contractor agrees to comply with 31 U.S.C. 1352 relating to limitations on the use of appropriated funds to influence certain Federal contracts; 18 U.S.C. 431 relating to officials not to benefit; 40 U.S.C. chapter 37, Contract Work Hours and Safety Standards; 41 U.S.C.

chapter 87, Kickbacks; 41 U.S.C. 4712 and 10 U.S.C. 2409 relating to whistleblower protections; 49 U.S.C. 40118, Fly American; and 41 U.S.C. chapter 21 relating to procurement integrity.

(s) Order of precedence. Any inconsistencies in this solicitation or contract shall be resolved by giving precedence in the following order: (1) the schedule of supplies/services; (2) The Assignments, Disputes, Limitation of Liability, Payments, Invoice, Other Compliances, and Compliance with Laws Unique to Government Contracts paragraphs of this clause. (3) the clause at 52.212-5; (4) addenda to this solicitation or contract, including any license agreements for computer software; (5) solicitation provisions if this is a solicitation; (6) other paragraphs of this clause; (7) the Standard Form 1449; (8) other documents, exhibits, and attachments; and (9) the specification.

(t) Reserved.

(u) Unauthorized Obligations.

(1) Except as stated in paragraph (u)(2) of this clause, when any supply or service acquired under this contract is subject to any End User License Agreement (EULA), Terms of Service (TOS), or similar legal instrument or agreement, that includes any clause requiring the Government to indemnify the Contractor or any person or entity for damages, costs, fees, or any other loss or liability that would create an Anti-Deficiency Act violation (31 U.S.C.

1341), the following shall govern:

(i) Any such clause is unenforceable against the Government.

(ii) Neither the Government nor any Government authorized end user shall be deemed to have agreed to such clause by virtue of it appearing in the EULA, TOS, or similar legal instrument or agreement. If the EULA, TOS, or similar legal instrument or agreement is invoked through an ``I agree'' click box or other comparable mechanism (e.g., ``click-wrap'' or ``browse-wrap'' agreements), execution does not bind the Government or any Government authorized end user to such clause.

(iii) Any such clause is deemed to be stricken from the EULA, TOS, or similar legal instrument or agreement.

(2) Paragraph (u)(1) of this clause does not apply to indemnification by the Government that is expressly authorized by statute and specifically authorized under applicable agency regulations and procedures.

(v) Incorporation by reference. The Contractor's representations and certifications, including those completed electronically via the System for Award Management (SAM), are incorporated by reference into the contract.

(w) Limitation of Liability- EXCEPT AS OTHERWISE PROVIDED IN FAR 52.246-23 LIMITATION OF LIABILITY AND FAR 52.246-24 LIMITATION OF LIABILITY-HIGH VALUE ITEMS, THE WARRANTY, OBLIGATIONS AND LIABILITIES OF SELLER AND THE RIGHTS AND REMEDIES OF BUYER SET

FORTH IN THIS AGREEMENT ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES,

OBLIGATIONS, OR LIABILITIES, EXPRESS OR IMPLIED ARISING BY LAW, IN CONTRACT, TORT (INCLUDING NEGLIGENCE OR STRICT LIABILITY) OR OTHERWISE, INCLUDING BUT NOT LIMITED TO (i) ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, WORKMANLIKE SERVICE OR ANY WARRANTY IMPLIED THROUGH COURSE OF PERFORMANCE, COURSE OF DEALING, OR USAGE OF TRADE OR (ii) CLAIMS ARISING OUT OF THE NEGLIGENCE OF SELLER OR SELLER’S SUPPLIERS OR (iii) ANY OTHER CLAIM ARISING OUT OF, CONNECTED WITH, OR RESULTING FROM THE DESIGN, MANUFACTURE, SALE, OR USE OF THE PARTS, ANY

COMPONENT THEREOF, AND SERVICES DELIVERED OR RENDERED HEREUNDER OR OTHERWISE.

Except as otherwise provided by an express warranty, Seller will not be liable to the Government for indirect, consequential or incidental damages resulting from any defect or deficiencies in accepted items, including but not limited to, any costs for removal, replacement or loss of use of Government equipment or systems. In no event shall the liability of Seller arising hereunder exceed one hundred percent (100%) of the total price of the Delivery Order that gives rise to the claim.

(x) Quotations and Orders Unless otherwise indicated, quotations are valid for thirty (30) days from the date of quotation.

Buyer’s order and acceptance of a quotation shall be confirmed by Buyer by means of a written order or acknowledgement (“Purchase Order”).

A Purchase Order that has been accepted by Seller is binding.

(y) Prices Prices are as specified in Seller’s quotation. Unless otherwise stated in the quotation, prices include standard commercial packaging.

(z) Delivery Seller shall deliver the Parts to Buyer Free on Board (destination) (FOB Destination) (Incoterms 2010).

Partial deliveries shall be permitted. If Buyer or the carrier refuses delivery or delays shipment or acceptance, the Parts may be stored according to Seller’s direction, as agent, at Buyer’s risk and expense.

(aa) Use of Reconditioned Material Parts manufactured by Seller may include materials that are newly manufactured.

(ab) Other Provisions Any illustrations, catalogues or other material provided by the Seller are for reference only and are not to be relied upon by the Buyer as containing any representations, warranties or indemnities, and they shall be treated as confidential and shall not be disclosed to a third party without Seller’s written consent.

(ac) No Waiver The failure of either party to enforce any provision of these terms and conditions shall not be construed as a waiver of such provision or the right thereafter to enforce each and every provision. No waiver by either party, express or implied, of any breach of these terms and conditions shall be construed as a waiver of any other breach of such term or condition.

(ad) Entire Agreement This Purchase Order supersedes all prior agreements, arrangements and understandings between the parties and constitutes the entire agreement between the parties relating to the subject matter hereof. Buyer warrants to Seller that it has not been induced to enter into this Purchase Order by any prior oral representation (whether innocently or negligently made) except as specifically contained herein.

(ae) Severability If any provision of this Purchase Order is held by any competent authority to be invalid or unenforceable in whole or in part, the validity of the other provisions of this Purchase Order and the remainder of the provisions in question shall not be affected and shall be enforced to the fullest extent permitted by law.

(End of Clause)

PERFORMANCE OF WORK STATEMENT

Section SF 1449 - CONTINUATION SHEET

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Each

ON SITE SERVICE FOR STBD CPP SYSTEM

FFP

OEM to provide on-site service for STBD CPP System.

Period of performance: 12 July 2024 - 30 August 2024

OEM oversite to assist in the disassemble, inspection, reassembly and sibsequent lube oil system flush of the CPP System that interfaces with the MRG.

See statement of work for full description of work to be performed.

Sole Source: Rolls-Royce FOB: Destination

BRAND NAME/SOLE SOURCE: SS

MILSTRIP: N6275824RCPS026

PURCHASE REQUEST NUMBER: N6275824RCPS026

PSC CD: J999

NET AMT

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government Destination Government

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 POP 12-JUL-2024 TO

30-AUG-2024

N/A N/A

FOB: Destination

CLAUSES INCORPORATED BY REFERENCE

52.204-2 Security Requirements MAR 2021 52.204-7 System for Award Management OCT 2018 52.204-9 Personal Identity Verification of Contractor Personnel JAN 2011 52.204-13 System for Award Management Maintenance OCT 2018 52.204-16 Commercial and Government Entity Code Reporting AUG 2020 52.204-17 Ownership or Control of Offeror AUG 2020 52.204-18 Commercial and Government Entity Code Maintenance AUG 2020 52.204-19 Incorporation by Reference of Representations and

Certifications.

DEC 2014

52.204-22 Alternative Line Item Proposal JAN 2017 52.204-24 Representation Regarding Certain Telecommunications and

Video Surveillance Services or Equipment

NOV 2021

52.209-2 Prohibition on Contracting with Inverted Domestic Corporations--Representation

NOV 2015

52.212-1 Instructions to Offerors--Commercial Products and Commercial Services

SEP 2023

52.212-3 Alt I Offeror Representations and Certifications--Commercial Products and Commercial Services (FEB 2024) Alternate I

FEB 2024

52.212-4 Contract Terms and Conditions--Commercial Products and Commercial Services

NOV 2023

52.222-22 Previous Contracts And Compliance Reports FEB 1999 52.223-5 Pollution Prevention and Right-to-Know Information MAY 2011 52.225-25 Prohibition on Contracting with Entities Engaging in Certain

Activities or Transactions Relating to Iran-- Representation and Certifications.

JUN 2020

52.228-3 Worker's Compensation Insurance (Defense Base Act) JUL 2014 52.237-2 Protection Of Government Buildings, Equipment, And

Vegetation

APR 1984

52.247-34 F.O.B. Destination NOV 1991 252.203-7000 Requirements Relating to Compensation of Former DoD

Officials

SEP 2011

252.203-7002 Requirement to Inform Employees of Whistleblower Rights DEC 2022 252.203-7005 Representation Relating to Compensation of Former DoD

Officials

SEP 2022

252.204-7003 Control Of Government Personnel Work Product APR 1992 252.204-7008 Compliance With Safeguarding Covered Defense Information

Controls

OCT 2016

252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting

JAN 2023

252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support

JAN 2023

252.204-7016 Covered Defense Telecommunications Equipment or Services -- Representation

DEC 2019

252.204-7017 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services -- Representation

MAY 2021

252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services

JAN 2023

252.204-7019 Notice of NIST SP 800-171 DoD Assessment Requirements NOV 2023

252.204-7020 NIST SP 800-171 DoD Assessment Requirements NOV 2023 252.211-7003 Item Unique Identification and Valuation JAN 2023 252.222-7002 Compliance With Local Labor Laws (Overseas) JUN 1997 252.223-7006 Prohibition On Storage, Treatment, and Disposal of Toxic or

Hazardous Materials

SEP 2014

252.225-7041 Correspondence in English JUN 1997 252.225-7042 Authorization to Perform APR 2003 252.225-7043 Antiterrorism/Force Protection Policy for Defense

Contractors Outside the United States

JUN 2015

252.225-7048 Export-Controlled Items JUN 2013 252.225-7055 Representation Regarding Business Operations with the

Maduro Regime

MAY 2022

252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime

JAN 2023

252.232-7008 Assignment of Claims (Overseas) JUN 1997 252.232-7010 Levies on Contract Payments DEC 2006 252.233-7001 Choice of Law (Overseas) JUN 1997 252.243-7001 Pricing Of Contract Modifications DEC 1991 252.244-7000 Subcontracts for Commercial Products or Commercial

Services

NOV 2023

252.246-7003 Notification of Potential Safety Issues JAN 2023 252.247-7023 Transportation of Supplies by Sea JAN 2023

CLAUSES INCORPORATED BY FULL TEXT

52.203-18 PROHIBITION ON CONTRACTING WITH ENTITIES THAT REQUIRE CERTAIN INTERNAL

CONFIDENTIALITY AGREEMENTS OR STATEMENTS--REPRESENTATION (JAN 2017)

(a) Definition. As used in this provision-- Internal confidentiality agreement or statement, subcontract, and subcontractor, are defined in the clause at 52.203- 19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements.

(b) In accordance with section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions), Government agencies are not permitted to use funds appropriated (or otherwise made available) for contracts with an entity that requires employees or subcontractors of such entity seeking to report waste, fraud, or abuse to sign internal confidentiality agreements or statements prohibiting or otherwise restricting such employees or subcontractors from lawfully reporting such waste, fraud, or abuse to a designated investigative or law enforcement representative of a Federal department or agency authorized to receive such information.

(c) The prohibition in paragraph (b) of this provision does not contravene requirements applicable to Standard Form 312, (Classified Information Nondisclosure Agreement), Form 4414 (Sensitive Compartmented Information Nondisclosure Agreement), or any other form issued by a Federal department or agency governing the nondisclosure of classified information.

(d) Representation. By submission of its offer, the Offeror represents that it will not require its employees or subcontractors to sign or comply with internal confidentiality agreements or statements prohibiting or otherwise restricting such employees or subcontractors from lawfully reporting waste, fraud, or abuse related to the performance of a Government contract to a designated investigative or law enforcement representative of a Federal department or agency authorized to receive such information (e.g., agency Office of the Inspector General).

(End of provision)

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR

EXECUTIVE ORDERS--COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (FEB 2024)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L.

113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities (DEC 2023) (Section 1634 of Pub. L. 115-91).

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (NOV 2021) (Section 889(a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (NOV 2015).

(5) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (MAR 2023) (31 U.S.C. 3903 and 10 U.S.C. 3801).

(6) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(7) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services: [Contracting Officer check as appropriate.]

___ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (JUN 2020), with Alternate I (NOV 2021) (41 U.S.C. 4704 and 10 U.S.C. 4655).

___ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (NOV 2021) (41 U.S.C. 3509).

___ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (JUN 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

___ (4) 52.203-17, Contractor Employee Whistleblower Rights (NOV 2023) (41 U.S.C. 4712); this clause does not apply to contracts of DoD, NASA, the Coast Guard, or applicable elements of the intelligence community--see FAR 3.900(a).

XXX (5) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (JUN 2020) (Pub. L.

109-282) (31 U.S.C. 6101 note).

___ (6) [Reserved]

___ (7) 52.204-14, Service Contract Reporting Requirements (OCT 2016) (Pub. L. 111-117, section 743 of Div.

C).

___ (8) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (OCT 2016) (Pub.

L. 111-117, section 743 of Div. C).

XXX (9) 52.204-27, Prohibition on a ByteDance Covered Application (JUN 2023) (Section 102 of Division R of Pub. L. 117-328).

___ (10) 52.204-28, Federal Acquisition Supply Chain Security Act Orders--Federal Supply Schedules, Governmentwide Acquisition Contracts, and Multi-Agency Contracts. (DEC 2023) (Pub. L. 115-390, title II).

___ (11)(i) 52.204-30, Federal Acquisition Supply Chain Security Act Orders--Prohibition. (DEC 2023) (Pub. L.

115-390, title II).

___ (ii) Alternate I (DEC 2023) of 52.204-30.

XXX (12) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (NOV 2021) (31 U.S.C. 6101 note).

___ (13) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (OCT 2018) (41 U.S.C. 2313).

____ (14) [Reserved]

____ (15) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (OCT 2022) (15 U.S.C. 657a).

____ (16) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (OCT 2022) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

____ (17) [Reserved]

____ (18)(i) 52.219-6, Notice of Total Small Business Set-Aside (NOV 2020) (15 U.S.C. 644).

____ (ii) Alternate I (MAR 2020) of 52.219-6.

____ (19)(i) 52.219-7, Notice of Partial Small Business Set-Aside (NOV 2020) (15 U.S.C. 644).

____ (ii) Alternate I (MAR 2020) of 52.219-7.

____ (20) 52.219-8, Utilization of Small Business Concerns (FEB 2024) (15 U.S.C. 637(d)(2) and (3)).

____ (21)(i) 52.219-9, Small Business Subcontracting Plan (SEP 2023) (15 U.S.C. 637(d)(4)).

____ (ii) Alternate I (NOV 2016) of 52.219-9.

____ (iii) Alternate II (NOV 2016) of 52.219-9.

____ (iv) Alternate III (JUN 2020) of 52.219-9.

____ (v) Alternate IV (SEP 2023) of 52.219-9.

____ (22) (i) 52.219-13, Notice of Set-Aside of Orders (MAR 2020) (15 U.S.C. 644(r)).

____ (ii) Alternate I (MAR 2020) of 52.219-13.

____ (23) 52.219-14, Limitations on Subcontracting (OCT 2022) (15 U.S.C. 657s).

____ (24) 52.219-16, Liquidated Damages—Subcontracting Plan (SEP 2021) (15 U.S.C. 637(d)(4)(F)(i)).

____ (25) 52.219-27, Notice of Set-Aside for, or Sole-Source Award to, Service-Disabled Veteran-Owned Small Business (SDVOSB) Concerns Eligible Under the SDVOSB Program (FEB 2024) (15 U.S.C. 657f).

____ (26) (i) 52.219-28, Post-Award Small Business Program Rerepresentation (FEB 2024) (15 U.S.C. 632(a)(2)).

____ (ii) Alternate I (MAR 2020) of 52.219-28.

____ (27) 52.219-29, Notice of Set-Aside for, or Sole-Source Award to, Economically Disadvantaged Women- Owned Small Business Concerns (OCT 2022) (15 U.S.C. 637(m)).

____ (28) 52.219-30, Notice of Set-Aside for, or Sole-Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (OCT 2022) (15 U.S.C. 637(m)).

____ (29) 52.219-32, Orders Issued Directly Under Small Business Reserves (MAR 2020) (15 U.S.C. 644(r)).

____ (30) 52.219-33, Nonmanufacturer Rule (SEP 2021) (15 U.S.C. 657s).

XXX (31) 52.222-3, Convict Labor (JUN 2003) (E.O. 11755).

XXX (32) 52.222-19, Child Labor--Cooperation with Authorities and Remedies (FEB 2024) (E.O. 13126).

XXX (33) 52.222-21, Prohibition of Segregated Facilities (APR 2015).

XXX (34)(i) 52.222-26, Equal Opportunity (SEP 2016) (E.O. 11246).

____ (ii) Alternate I (FEB 1999) of 52.222-26.

____ (35)(i) 52.222-35, Equal Opportunity for Veterans (JUN 2020) (38 U.S.C. 4212).

____ (ii) Alternate I (JUL 2014) of 52.222-35.

XXX (36)(i) 52.222-36, Equal Opportunity for Workers with Disabilities (JUN 2020) (29 U.S.C. 793).

____ (ii) Alternate I (JUL 2014) of 52.222-36.

____ (37) 52.222-37, Employment Reports on Veterans (JUN 2020) (38 U.S.C. 4212).

____ (38) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (DEC 2010) (E.O.

13496).

XXX (39)(i) 52.222-50, Combating Trafficking in Persons (NOV 2021) (22 U.S.C. chapter 78 and E.O. 13627).

XXX (ii) Alternate I (MAR 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

____ (40) 52.222-54, Employment Eligibility Verification (MAY 2022). (E. O. 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial products or commercial services as prescribed in FAR 22.1803.)

____ (41)(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–Designated Items (MAY 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

____ (ii) Alternate I (MAY 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

____ (42) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (JUN 2016) (E.O. 13693).

____ (43) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners

(JUN 2016) (E.O. 13693).

____ (44)(i) 52.223-13, Acquisition of EPEAT® Registered Imaging Equipment (JUN 2014) (E.O.s 13423 and 13514).

____ (ii) Alternate I (OCT 2015) of 52.223-13.

____ (45)(i) 52.223-14, Acquisition of EPEAT® Registered Televisions (JUN 2014) (E.O.s 13423 and 13514).

____ (ii) Alternate I (JUN 2014) of 52.223-14.

____ (46) 52.223-15, Energy Efficiency in Energy-Consuming Products (MAY 2020) (42 U.S.C. 8259b).

____ (47)(i) 52.223-16, Acquisition of EPEAT®-Registered Personal Computer Products (OCT 2015) (E.O.s 13423 and 13514).

____ (ii) Alternate I (JUN 2014) of 52.223-16.

XXX (48) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (JUN 2020) (E.O.

13513).

____ (49) 52.223-20, Aerosols (JUN 2016) (E.O. 13693).

____ (50) 52.223-21, Foams (JUN 2016) (E.O. 13693).

____ (51)(i) 52.224-3, Privacy Training (JAN 2017) (5 U.S.C. 552a).

____ (ii) Alternate I (JAN 2017) of 52.224-3.

____ (52) (i) 52.225-1, Buy American--Supplies (OCT 2022) (41 U.S.C. chapter 83).

____ (ii) Alternate I (OCT 2022) of 52.225-1.

____ (53)(i) 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (NOV 2023) (19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, 19 U.S.C.

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .