N0025321Q0062 A0001.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83)

Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this amendment is to include the part number and description for each CLIN.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 5

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 09-Mar-2021

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X N0025321Q0062

X 9B. DATED (SEE ITEM 11)

05-Mar-2021

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE

RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

09-Mar-2021

CODE

NAVAL UNDERSEA WARFARE CENTER

ATTN: MURRAY LANCASTER

MURRAY.LANCASTER@NAVY.MIL

610 DOWELL ST, BLDG 206

KEYPORT WA 98345

N00253 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

N0025321Q0062

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 1449 - CONTINUATION SHEET

SUPPLIES OR SERVICES AND PRICES

CLIN 0001

The CLIN extended description has changed from:

- MASKING-PLATING MASK ID USING CUSTOMER SUPPLIED MASKING.- CADMIUM AMS-QQ-P-416

TYPE II CLASS 1 .0005" MIN., Rev: E - UNMASKING-PLATING- STYLUS BRUSH PLATE MIL-STD-865 (D

1) (CADMIUM) TO MEET THE REQUIREMENTS OF AMS-QQ-P-416 TYPE II CLASS 1 .0005" - .0007"

THICK (SELECTIVE PLATING), Rev: E (BRUSH CAD) BARE AREAS ON ENDS OF PART.VENDOR IS TO

PROVIDE ANY NECESSARY MASKING AND/OR FIXTURES REQUIRED TO ACCOMPLISH PLATING IN

ACCORDANCE WITH THIS STATEMENT OF WORK AND THE REFERENCED DRAWINGS AND

SPECIFICATIONS. CUSTOMER WILL PROVIDE WEIGHTS TO SINK PART. WEIGHTS MUST BE

ISOLATED FROM PART.Labels must be marked with Nomenclature, Contract Number and Vendor Cage

Code.Packaging must ensure no Damage to Part in Shipment.

To:

BST-1 Buoy Case, PN: 18456871 lot consists of 2 each- MASKING-PLATING MASK ID USING CUSTOMER

SUPPLIED MASKING.- CADMIUM AMS-QQ-P-416 TYPE II CLASS 1 .0005" MIN., Rev: E - UNMASKING-

PLATING- STYLUS BRUSH PLATE MIL-STD-865 (D 1) (CADMIUM) TO MEET THE REQUIREMENTS OF

AMS-QQ-P-416 TYPE II CLASS 1 .0005" - .0007" THICK (SELECTIVE PLATING), Rev: E (BRUSH CAD)

BARE AREAS ON ENDS OF PART.VENDOR IS TO PROVIDE ANY NECESSARY MASKING AND/OR

FIXTURES REQUIRED TO ACCOMPLISH PLATING IN ACCORDANCE WITH THIS STATEMENT OF

WORK AND THE REFERENCED DRAWINGS AND SPECIFICATIONS. CUSTOMER WILL PROVIDE

WEIGHTS TO SINK PART. WEIGHTS MUST BE ISOLATED FROM PART.Labels must be marked with

Nomenclature, Contract Number and Vendor Cage Code.Packaging must ensure no Damage to Part in Shipment.

CLIN 1001

1) (CADMIUM) TO MEET THE REQUIREMENTS OF AMS-QQ-P-416 TYPE II CLASS 1 .0005" - .0007"

THICK (SELECTIVE PLATING), Rev: E (BRUSH CAD) BARE AREAS ON ENDS OF PART.VENDOR IS TO

PROVIDE ANY NECESSARY MASKING AND/OR FIXTURES REQUIRED TO ACCOMPLISH PLATING IN

ACCORDANCE WITH THIS STATEMENT OF WORK AND THE REFERENCED DRAWINGS AND

SPECIFICATIONS. CUSTOMER WILL PROVIDE WEIGHTS TO SINK PART. WEIGHTS MUST BE

ISOLATED FROM PART.MATERIAL MAY BE DELIVERED TO BY GOVERNMENT PERSONNELLabels must be marked with Nomenclature, Contract Number and Vendor Cage Code.Packaging must ensure no Damage to

Part in Shipment.This is an Option Item only and in no way are purchased or guaranteed under the resulting contract. Work cannot be started or performed under the Option Item without Option Exercise by the Contracting

Officer. Options will be individually exercised in accordance with FAR Clause 52.217-7.

PLATING- STYLUS BRUSH PLATE MIL-STD-865 (D 1) (CADMIUM) TO MEET THE REQUIREMENTS OF

AMS-QQ-P-416 TYPE II CLASS 1 .0005" - .0007" THICK (SELECTIVE PLATING), Rev: E (BRUSH CAD)

BARE AREAS ON ENDS OF PART.VENDOR IS TO PROVIDE ANY NECESSARY MASKING AND/OR

FIXTURES REQUIRED TO ACCOMPLISH PLATING IN ACCORDANCE WITH THIS STATEMENT OF

WORK AND THE REFERENCED DRAWINGS AND SPECIFICATIONS. CUSTOMER WILL PROVIDE

WEIGHTS TO SINK PART. WEIGHTS MUST BE ISOLATED FROM PART.MATERIAL MAY BE

DELIVERED TO BY GOVERNMENT PERSONNELLabels must be marked with Nomenclature, Contract

Number and Vendor Cage Code.Packaging must ensure no Damage to Part in Shipment.This is an Option Item only and in no way are purchased or guaranteed under the resulting contract. Work cannot be started or performed under the Option Item without Option Exercise by the Contracting Officer. Options will be individually exercised in accordance with FAR Clause 52.217-7.

CLIN 2001

1) (CADMIUM) TO MEET THE REQUIREMENTS OF AMS-QQ-P-416 TYPE II CLASS 1 .0005" - .0007"

THICK (SELECTIVE PLATING), Rev: E (BRUSH CAD) BARE AREAS ON ENDS OF PART.VENDOR IS TO

PROVIDE ANY NECESSARY MASKING AND/OR FIXTURES REQUIRED TO ACCOMPLISH PLATING IN

ACCORDANCE WITH THIS STATEMENT OF WORK AND THE REFERENCED DRAWINGS AND

SPECIFICATIONS. CUSTOMER WILL PROVIDE WEIGHTS TO SINK PART. WEIGHTS MUST BE

ISOLATED FROM PART.MATERIAL MAY BE DELIVERED TO BY GOVERNMENT PERSONNELLabels must be marked with Nomenclature, Contract Number and Vendor Cage Code.Packaging must ensure no Damage to

Part in Shipment.This is an Option Item only and in no way are purchased or guaranteed under the resulting contract. Work cannot be started or performed under the Option Item without Option Exercise by the Contracting

PLATING- STYLUS BRUSH PLATE MIL-STD-865 (D 1) (CADMIUM) TO MEET THE REQUIREMENTS OF

AMS-QQ-P-416 TYPE II CLASS 1 .0005" - .0007" THICK (SELECTIVE PLATING), Rev: E (BRUSH CAD)

BARE AREAS ON ENDS OF PART.VENDOR IS TO PROVIDE ANY NECESSARY MASKING AND/OR

FIXTURES REQUIRED TO ACCOMPLISH PLATING IN ACCORDANCE WITH THIS STATEMENT OF

WORK AND THE REFERENCED DRAWINGS AND SPECIFICATIONS. CUSTOMER WILL PROVIDE

WEIGHTS TO SINK PART. WEIGHTS MUST BE ISOLATED FROM PART.MATERIAL MAY BE

DELIVERED TO BY GOVERNMENT PERSONNELLabels must be marked with Nomenclature, Contract

Number and Vendor Cage Code.Packaging must ensure no Damage to Part in Shipment.This is an Option Item only and in no way are purchased or guaranteed under the resulting contract. Work cannot be started or performed under the Option Item without Option Exercise by the Contracting Officer. Options will be individually exercised in

CLIN 3001

1) (CADMIUM) TO MEET THE REQUIREMENTS OF AMS-QQ-P-416 TYPE II CLASS 1 .0005" - .0007"

THICK (SELECTIVE PLATING), Rev: E (BRUSH CAD) BARE AREAS ON ENDS OF PART.VENDOR IS TO

PROVIDE ANY NECESSARY MASKING AND/OR FIXTURES REQUIRED TO ACCOMPLISH PLATING IN

ACCORDANCE WITH THIS STATEMENT OF WORK AND THE REFERENCED DRAWINGS AND

SPECIFICATIONS. CUSTOMER WILL PROVIDE WEIGHTS TO SINK PART. WEIGHTS MUST BE

ISOLATED FROM PART.MATERIAL MAY BE DELIVERED TO BY GOVERNMENT PERSONNELLabels must be marked with Nomenclature, Contract Number and Vendor Cage Code.Packaging must ensure no Damage to

Part in Shipment.This is an Option Item only and in no way are purchased or guaranteed under the resulting contract. Work cannot be started or performed under the Option Item without Option Exercise by the Contracting

PLATING- STYLUS BRUSH PLATE MIL-STD-865 (D 1) (CADMIUM) TO MEET THE REQUIREMENTS OF

AMS-QQ-P-416 TYPE II CLASS 1 .0005" - .0007" THICK (SELECTIVE PLATING), Rev: E (BRUSH CAD)

BARE AREAS ON ENDS OF PART.VENDOR IS TO PROVIDE ANY NECESSARY MASKING AND/OR

FIXTURES REQUIRED TO ACCOMPLISH PLATING IN ACCORDANCE WITH THIS STATEMENT OF

WORK AND THE REFERENCED DRAWINGS AND SPECIFICATIONS. CUSTOMER WILL PROVIDE

WEIGHTS TO SINK PART. WEIGHTS MUST BE ISOLATED FROM PART.MATERIAL MAY BE

DELIVERED TO BY GOVERNMENT PERSONNELLabels must be marked with Nomenclature, Contract

Number and Vendor Cage Code.Packaging must ensure no Damage to Part in Shipment.This is an Option Item only and in no way are purchased or guaranteed under the resulting contract. Work cannot be started or performed under the Option Item without Option Exercise by the Contracting Officer. Options will be individually exercised in

CLIN 4001

1) (CADMIUM) TO MEET THE REQUIREMENTS OF AMS-QQ-P-416 TYPE II CLASS 1 .0005" - .0007"

THICK (SELECTIVE PLATING), Rev: E (BRUSH CAD) BARE AREAS ON ENDS OF PART.VENDOR IS TO

PROVIDE ANY NECESSARY MASKING AND/OR FIXTURES REQUIRED TO ACCOMPLISH PLATING IN

ACCORDANCE WITH THIS STATEMENT OF WORK AND THE REFERENCED DRAWINGS AND

SPECIFICATIONS. CUSTOMER WILL PROVIDE WEIGHTS TO SINK PART. WEIGHTS MUST BE

ISOLATED FROM PART.MATERIAL MAY BE DELIVERED TO BY GOVERNMENT PERSONNELLabels must be marked with Nomenclature, Contract Number and Vendor Cage Code.Packaging must ensure no Damage to

Part in Shipment.This is an Option Item only and in no way are purchased or guaranteed under the resulting contract. Work cannot be started or performed under the Option Item without Option Exercise by the Contracting

PLATING- STYLUS BRUSH PLATE MIL-STD-865 (D 1) (CADMIUM) TO MEET THE REQUIREMENTS OF

AMS-QQ-P-416 TYPE II CLASS 1 .0005" - .0007" THICK (SELECTIVE PLATING), Rev: E (BRUSH CAD)

BARE AREAS ON ENDS OF PART.VENDOR IS TO PROVIDE ANY NECESSARY MASKING AND/OR

FIXTURES REQUIRED TO ACCOMPLISH PLATING IN ACCORDANCE WITH THIS STATEMENT OF

WORK AND THE REFERENCED DRAWINGS AND SPECIFICATIONS. CUSTOMER WILL PROVIDE

WEIGHTS TO SINK PART. WEIGHTS MUST BE ISOLATED FROM PART.MATERIAL MAY BE

DELIVERED TO BY GOVERNMENT PERSONNELLabels must be marked with Nomenclature, Contract

Number and Vendor Cage Code.Packaging must ensure no Damage to Part in Shipment.This is an Option Item only and in no way are purchased or guaranteed under the resulting contract. Work cannot be started or performed under the Option Item without Option Exercise by the Contracting Officer. Options will be individually exercised in

(End of Summary of Changes)