List of Specifications.pdf

List of Specifications Audio Visual Technology Refresh

United States Fleet Forces Command (USFFC) Norfolk, Virginia

As a branch of the USFFC N6 Communication and Information Systems Directorate, the N612 mission is to provide useful state of the art Information Technology services. This mission is integral in support of the Strategic Priorities of the USFF: Readiness Output, Enterprise Management / Alignment, Execute Combatant Commander Demand, Capabilities / CONOPS and Workforce Character and Professionalism. The intended goal is to provide reliable state of the art Audio Visual (AV) and Video Teleconferencing (VTC) systems that will provide service well into the future and integrate remote, net centric asset management and control of these systems.

This requirement is for the procurement of AV equipment for technical refresh integration for multiple audio visual and video teleconferencing spaces as part of the N6 life cycle maintenance plan. The contractor shall provide all listed items and quantities specified below. All products shall be new, unopened, in their original box. No labor/installation is required.

1. REQUIREMENTS:

1.1 Quantity 50: (Vertiv-Cybex SCM145H) KVM switch Four Input / Two Output

1.1.1 Input Ports: (4) HDMI 1.4

1.1.2 Output Ports: (2) HDMI 1.4

1.1.3 Video Resolution: 4K UHD 3840 x 2160 @ 30 Hz

1.1.4 Power Supply: Internal

1.1.5 Input Power: 35W (100V-240V AC)

1.1.6 Weight: 3 Ibs

1.2 Quantity 100: (Vertiv-Cybex CBL0113) KVM switch Cable connections

1.2.1 Cable length / Minimum 6’

1.2.2 Supports HDMI 1.4

1.2.3 USB A/B

1.3 Quantity 14: (Christie Digital SUHD753-L) 75” secure flat panel display

1.3.1 Direct Lit LED Backlight technology

1.3.2 Native resolution: UHD 3840 x 2160 (16:9)

1.3.3 No built in radios / RF capability of any type

1.3.4 TAA Compliant

1.3.5 Display orientation: Landscape or Portrait

1.3.6 LED lifespan • 50,000 hours to 50% brightness

1.3.7 Contrast Ratio: 1200:1

1.3.8 Pixel pitch: 0.429 x 0.429mm

1.3.9 Nominal bezel size: 21mm x 13mm

1.3.10 Inputs: 2 x HDMI (Ver 2.0, HDCP 2.2) • DisplayPort (Ver 1.2a, HDCP 1.3, supports a UHD signal at 30Hz only) • VGA • YPbPr • USB 3.0 • 2 x USB 2.0

1.3.11 Brightness (Typical): 600nits

1.3.12 Runtime 24 hours / 7 days a week

1.3.13 Embedded processing: only via OPS slot

1.3.14 VESA 600 x 400mm, M6

1.3.15 Warranty: Three years parts and labor limited warranty

1.3.16 Operating voltage: 100 – 240 VAC 50/60Hz

1.3.17 Power Consumption: 218 Watts typical

1.3.18 Size: (L x W x H): 66.3 x 38.1 x 2.8"

1.3.19 Weight: 80.5 lbs.

1.4 Quantity 4: (BRG 6610C) 5 Zone digital clock.

1.4.1 OCXOA oscillator accurate to .06 seconds per year

1.4.2 1.8”, 2.5” or 4.0” red bar segment LEDs for displaying time* (blue & green optional)

1.4.3 1.2” or 2.0” red 15 character alpha numeric dot matrix LEDs for displaying zone names* (blue, green & yellow optional)

1.4.4 Zone flipping feature that allows up to 16 zones in a single clock

1.4.5 12 or 24 hour format

1.4.6 DST and time zone offsets supported

1.4.7 PC Interface: USB Interface

1.4.8 IR remote control standard or optional RF remote

1.4.9 Black brushed Aluminum frame

1.4.10 Multiple cord lengths available

1.4.11 US, British, Australian or European plugs

1.4.12 100-240 VAC. 50-60 cycle power

1.5 Quantity 5: (Legrand Chief Display Mount XTM1U-G) Fusion wall tilt display mount.

1.5.1 Lateral Shift: 17.4”

1.5.2 Manual Height Adjustment: 1”

1.5.3 Minimum Depth: 2”

1.5.4 Mounting Pattern Compatibility: 100 X 100 X 600

1.5.5 Shipping Weight: 19.37 Ibs.

1.5.6 Typical Screen Size: 42” – 86”

1.5.7 Wall Stud Compatibility In: 16” – 32”

1.5.8 Weight Capacity: 200 Ibs.

1.5.9 Orientation: Landscape

1.6 Quantity 2: (Cisco CS-CODEC-PLUS-K9) Codec Plus – TAA, NO RADIO

1.6.1 Software compatibility

1.6.1.1 Cisco Collaboration Endpoint Software Version 9.0 or later, or Cisco

Webex Room OS

1.6.2 Bandwidth

1.6.2.1 Up to 6 Mbps point-to-point

1.6.3 Minimum bandwidth for resolution/frame rate H.264

1.6.3.1 720p30 from 768 kbps

1.6.3.2 720p60 from 1152 kbps

1.6.3.3 1080p30 from 1472 kbps

1.6.3.4 1080p60 from 2560 kbps

1.6.4 Firewall traversal

1.6.4.1 Cisco Expressway™ technology

1.6.4.2 H.460.18, H.460.19 firewall traversal

1.6.5 Video standards

1.6.5.1 H.264, H.265, and H.263 for TANDBERG™ MXP interoperability only

1.6.6 Video inputs

1.6.6.1 One HDMI input supports formats up to maximum 1080p60

1.6.6.2 Two HDMI inputs support formats up to maximum 4K (3840 x 2160) at

30 fps including HD1080p60

1.6.6.3 Extended Display Identification Data (EDID)

1.6.6.4 Consumer Electronics Control (CEC) 2.0

1.6.7 Video outputs

1.6.7.1 Two HDMI outputs support formats up to 3840 x 2160p60 (4Kp60)

1.6.7.2 Consumer Electronics Control (CEC) 2.0

1.6.8 Encode and decode

1.6.8.1 Main video: Full HD 1080p60

1.6.8.2 Presentation channel: UHD 4K 2160p5, including 1080p30 and 720p60

1.6.9 Audio standards

1.6.9.1 G.711, G.722, G.722.1, G.729, AAC-LD, and Opus

1.6.10 Audio features

1.6.10.1 High-quality 20 kHz audio

1.6.10.2 Subwoofer line out for Quad Camera

1.6.10.3 Prepared for inductive loop (line out)

1.6.10.4 Automatic Gain Control (AGC)

1.6.10.5 Automatic noise reduction

1.6.10.6 Active lip synchronization

1.6.11 Audio inputs

1.6.11.1 Three microphones, 4-pin mini-jack

1.6.11.2 Embedded audio on two HDMI inputs

1.6.12 Audio outputs

1.6.12.1 1 line out mini-jack (stereo) (Codec Plus)

1.6.12.2 1 RCA output for subwoofer (Quad Camera)

1.6.12.3 Embedded audio on one HDMI output

1.6.12.4 HDMI input #1 supports Audio Return Channel (ARC): Audio output to

Quad Camera

1.6.13 Speakers (Quad Camera)

1.6.13.1 High-quality speakers

1.6.13.2 Frequency response: 70 Hz to 20 kHz

1.6.13.3 Max output level SPL 90dB

1.6.14 Speaker tracking (Quad Camera, SpeakerTrack 60)

1.6.14.1 6-element microphone array for accurate speaker tracking

1.6.15 Dual stream

1.6.15.1 H.239 (H.323) dual stream

1.6.15.2 Binary Floor Control Protocol (BFCP) (SIP) dual stream

1.6.15.3 Support resolutions up to 3840 x 2160p5 (4Kp5),1080p30 and 720p60

1.6.16 MultiSite features (embedded multipoint) (optional upgrade)

1.6.16.1 Adaptive SIP/H.323 MultiSite ◦ 3-way resolution up to 1080p30 + content up to 4Kp5 ◦ 4-way resolution up to 720p30 + content up to 4Kp5

1.6.16.2 Full individual audio and video transcoding

1.6.16.3 H.323/SIP/VoIP in the same conference

1.6.16.4 Support for presentation (H.239/BFCP) from any participant at resolutions up to 3840 x 2160p5

1.6.16.5 Best Impression (automatic continuous presence layouts)

1.6.16.6 Encryption and dual stream from any site

1.6.17 Protocols

1.6.17.1 H.323

1.6.17.2 SIP

1.6.17.3 Cisco Webex

1.6.18 Embedded encryption

1.6.18.1 H.323 and SIP point-to-point

1.6.18.2 Standards-based: H.235 v3 and Advanced Encryption Standard (AES)

1.6.18.3 Automatic key generation and exchange

1.6.19 IP network features

1.6.19.1 DNS lookup for service configuration

1.6.19.2 Differentiated services (Quality of Service [QoS])

1.6.19.3 IP-adaptive bandwidth management (including flow control)

1.6.19.4 Automatic gatekeeper discovery

1.6.19.5 Dynamic playout and lip-sync buffering

1.6.19.6 H.245 Dual-Tone Multi-Frequency (DTMF) tones in H.323

1.6.19.7 RFC 4733 DTMF tones in SIP

1.6.19.8 Date and time support using Network Time Protocol (NTP)

1.6.19.9 Uniform Resource Identifier (URI) dialing

1.6.19.10 Dynamic Host Configuration Protocol (DHCP)

1.6.19.11 802.1X network authentication

1.6.19.12 802.1Q Virtual LAN

1.6.19.13 802.1p [QoS and Class of Service (CoS)]

1.6.19.14 Cisco Media Assure and Clear Path, including packet loss-based down speeding

1.6.20 Call control

1.6.20.1 Cisco Unified Communications Manager (CUCM) ◦ Native registration

CUCM ◦ Requires CUCM Version 10.5.2 or later with device pack Room Kit Plus

1.6.20.2 Cisco Expressway ◦ Native registration with Expressway

1.6.20.3 Cisco WebEx

1.6.20.4 Third-party H.323 Gatekeepers and standards-based SIP proxies

1.6.21 IPv6 network support

1.6.21.1 Single call stack support for both H.323 and SIP

1.6.21.2 Dual-stack IPv4 and IPv6 for DHCP, SSH, HTTP, HTTPS, DNS, DiffServ

1.6.21.3 Support for both static and automatic IP configuration (stateless address auto configuration)

1.6.22 Security features

1.6.22.1 Management using HTTPS and SSH

1.6.22.2 IP administration password

1.6.22.3 Password to access administration features on Touch 10 controller

1.6.22.4 Disable IP services

1.6.22.5 Network settings protection Certificate management

1.6.22.6 Certificate Authority Proxy Function (CAPF) support for additional security

1.6.22.7 Manufacturer-Installed Certificates (MIC)

1.6.22.8 Locally Significant Certificates (LSC)

1.6.22.9 X.509 Digital Certificates (DER encoded binary); both DER and Base-64 formats are acceptable for the client and server certificates; certificates with a key size of 1024, 2048, and 4096 are supported Other interfaces

1.6.22.10 USB 2.0 port, uUSB, factory reset pinhole Network interfaces Codec Plus

1.6.22.11 1 Ethernet (RJ-45) 10/100/1000 for LAN

1.6.22.12 1 Ethernet (RJ-45) 10/100/1000 for direct pairing with camera (camera control)

1.6.22.13 1 Ethernet (RJ-45) 10/100/1000 with PoE, for direct pairing with

Touch 10

1.6.22.14 Wi-Fi 802.11a/b/g/n/ac 2.4 GHz and 5 GHz for LAN

1.6.22.15 2x2 multiple input and multiple output (MIMO) Power supplies (2)

1.6.22.16 100 to 240 VAC, 50/60 Hz, 12V DC input

1.6.22.17 Average 20 W, peak 70W

1.6.23 Dimensions:

1.6.23.1 Width: 14.1 in. (35.9 cm)

1.6.23.2 Height: 1.7 in. (4.3 cm)

1.6.23.3 Depth: 5.6 in. (14.3 cm)

1.6.23.4 Weight: 3.9 lb. (1.77 kg)

1.7 Quantity 2: (Middle Atlantic LBP1A) 10 Pack cable lacing bar

1.7.1 Straight “L” shaped cable lacing bar

1.8 Quantity 2: (Middle Atlantic LBP4A) 10 Pack cable lacing bar

1.8.1 4” offset “L” shaped cable lacing bar

1.9 Quantity 2: (Middle Atlantic PHBL-1) 10 Pack Flat blank panel

1.9.1 PHBL Series lightweight 11-gauge aluminum design makes every PHBL series blank panel easy to machine.

1.10 Quantity 2: (Middle Atlantic BR1) 10 Pack Brush grommet cable pass plate

1.10.1 Brush grommet panel

1.11 Quantity 5: (Vaddio 535-2000-244) Wall mount for camera

1.11.1 Heavy steel construction

1.11.2 Withstand up to 20Ibs.

1.12 Quantity 10: (Liberty 24-4P-L6SH-BLK or equivalent) 1000 Foot Black Shielded Cat6 cable spool

1.12.1 23AWG Solid Bare Copper Conductors

1.12.2 Core of 4 twisted pairs with an overall foil shield

1.12.3 Riser rated Lead-Free PVC Jacketing

1.12.4 3rd Party Certified to ANSI/TIA-568 Category 6 Standard

1.12.5 NEC CMR, CEC CMR FT4, RoHS/REACH Compliant

1.13 Quantity 3: (Liberty 24-4P-L6SH-WHT or equivalent) 1000 Foot White Shielded Cat6 cable

1.13.1 23AWG Solid Bare Copper Conductors

1.13.2 Core of 4 twisted pairs with an overall foil shield

1.13.3 Riser rated Lead-Free PVC Jacketing

1.13.4 3rd Party Certified to ANSI/TIA-568 Category 6 Standard

1.13.5 NEC CMR, CEC CMR FT4, RoHS/REACH Compliant

1.14 Quantity 3: (Liberty 24-4P-L6-EN-BLK or equivalent) 1000 Foot Black Unshielded Cat6 cable

1.14.1 23AWG Solid Bare Copper Conductors

1.14.2 HDPE, high-density polyethylene insulation

1.14.3 Color striping on white conductors

1.14.4 Varying lay twisted pairs cabled on a common axis

1.14.5 Ripcord under the jacket

1.14.6 FR-PVC, flame rated polyvinyl chloride jacket

1.14.7 Tested to 550 MHz with a positive ACR spec to 550 MHz

1.14.8 3rd Party Certified to ANSI/TIA-568 Category 6 Standard

1.14.9 NEC CMR, CEC CMR FT4, RoHS/REACH Compliant

1.15 Quantity 2: (Liberty 22-4C-PSH-BLK-BX or equivalent) 1000 Foot Black 22 AWG 4-Conductor cable

1.15.1 Stranded annealed bare copper conductors

1.15.2 Plenum rated PVC alloy insulation

1.15.3 Twisted, shielded

1.15.4 Plenum rated PVC jacket

1.15.5 UL 444, UL 13 CMP rated for the US and Canada

1.15.6 Standard package 1000 foot spool

1.16 Quantity 10: (Liberty BOOT-L-BLK or equivalent) 50 Pack RJ45 snag free connector strain relief boot

1.16.1 Push over boot strain relief for standard RJ45 plugs

1.16.2 Snag Free design covers the release latch

1.16.3 Category 6 and 6A F/UTP up to 0.295" OD

1.16.4 50-Pc Bags, 1 each is a full bag.

1.17 Quantity 10: (Liberty 606190 or equivalent) 100 Count Rj45 Cat6A 10Gig Shielded Connector

1.17.1 Specifically made for terminating Cat6A/10Gig cable

1.17.2 8P8C RJ45 male plug format

1.17.3 Category 6/6A rated for large OD shielded cables

1.17.4 Maximum cable diameter 8.5mm/0.335"

1.17.5 Maximum insulated conductor OD 1.35mm/0.053"

1.17.6 UL Certified

1.17.7 Unbreakable bags of 100 connectors

1.18 Quantity 2: (Liberty 12516 or equivalent) Tele-TitanXg Cat6A Crimp Tool

1.18.1 Specifically made for terminating Cat6A/10Gig connectors

1.18.2 Linear action vertical crimp force

1.18.3 Minimal force required for a perfect crimp

1.19 Quantity 125: (Crestron DM-NVX-363) 4K60 4:4:4 HDR Network AV Encoder/Decoder

1.19.1 Video Resolutions: Up to 4096x2160@60Hz (DCI 4K60); 4:4:4 color sampling;

HDR10, HDR10+, Dolby Vision, and Deep Color support

1.19.2 Audio formats: Multichannel (up to 8-channel LPCM or encoded HBR 7.1 surround sound), 2-channel LPCM11

1.19.3 Bit Rates: Encoder: Fixed (200 to 950 Mbps - user specified)5, Adaptive (dependent on input resolution of the stream), or Variable (less than 150 Mbps to maximum of 750 Mbps, dependent on content and input resolution of the stream) Decoder: Based on the stream received from the encoder

1.19.4 Streaming Protocols: RTP, SDP

1.19.5 Input Signal Types: HDMI with HDR10, HDR10+, Dolby Vision, Deep Color, and

4K60 4:4:4 support1, 12 (Dual-Mode DisplayPort™ interface and DVI compatible13)

1.19.6 Output Signal Types: HDMI with HDR10, HDR10+, Dolby Vision, Deep Color, and

4K60 4:4:4 support1 (DVI compatible13)

1.19.7 Switcher: 2x1 in decoder mode (HDMI, Stream), manual or auto-switching, breakaway audio7, Crestron QuickSwitch HD™ technology

1.19.8 Scaler: 4K60 4:4:4 video scaler with motion-adaptive deinterlacing, intelligent frame rate conversion, Deep Color support, HDR10, HDR10+, and Dolby Vision support, widescreen format selection (zoom, stretch, maintain aspect-ratio, or 1:1), video wall processing up to 8 wide x 8 high

1.19.9 Audio Input: HDMI (Dual-Mode DisplayPort interface compatible13), analog stereo

1.19.10 Audio Output: HDMI (multichannel pass-through), analog stereo (2-channel down mix)

1.19.11 Audio Format: Stereo 2-channel

1.19.12 Ethernet: Auto-switching, auto-negotiating, auto-discovery, full/half duplex, TCP/IP, UDP/IP, CIP, DHCP, SSL, TLS, SSH, SFTP (SSH File Transfer Protocol), IEEE 802.1X, IPv4 only or both IPv4 and IPv6, Active Directory authentication, variable Multicast TTL, HTTPS web browser setup and control, Crestron 3-Series or later control system integration

1.19.13 RS-232: 2-way device control and monitoring up to 115.2k baud with hardware and software handshaking via control system

1.19.14 POE+: IEEE 802.3at Type 2 Class 4 (25.5 W) compliant;

Compatible with Crestron DM-PSU-ULTRA-MIDSPAN, PoE+ compliant Ethernet switch, or third-party IEEE 802.3at compliant PSE15

1.19.15 Power Consumption: 22W

1.20 Quantity 6: (Crestron TS-1070-GV-B-S) 10.1 in. Tabletop Touch Screen, Government Version, Black Smooth

1.20.1 10.1 in. (257 mm) widescreen active-matrix color display and 1920 x 1200 WUXGA display resolution

1.20.2 Capacitive touch screen display

1.20.3 Custom-programmable virtual control buttons

1.20.4 Supports Crestron HTML5 and Smart Graphics® software custom user projects

1.20.5 H.265, H.264, or MJPEG streaming video display

1.20.6 Single wire Ethernet connection with PoE or PoE+ power

1.20.7 USB 2.0 port for room availability accessories

1.20.8 Enterprise grade security and authentication

1.20.9 Web, cloud, or device-based configuration

1.20.10 No microphone, Bluetooth® communications beacon, and Wi-Fi® network connectivity to comply with government applications demanding extra privacy and security.

1.21 Quantity 10: (Audio Technica AT8699R) Microphone Desktop Base

1.21.1 XLR connection base for microphone insert.

1.21.2 Desktop base

1.22 Quantity 10: (Audio Technica ES925C12/XLR) Gooseneck microphone with LED

1.22.1 Element: Fixed-charge back plate, permanently polarized condenser

1.22.2 Polar Pattern: Cardioid pattern

1.22.3 Frequency Response: 30-20,000 Hz

1.22.4 Open Circuit Sensitivity: -40 dB (10.0 mV) re 1V at 1 Pa

1.22.5 Maximum Input Sound Level: 140 dB

1.23 Quantity 15: (Shure ANI4IN-BLOCK) Audio Network Interface Dante

1.23.1 Element: Fixed-charge back plate, permanently polarized condenser

1.23.2 Single Ethernet port carries Dante audio, power (PoE – class 0)

1.23.3 LEDs indicate device status and audio signal

1.23.4 Control strings for third-party preset controllers including Crestron® and AMX®

1.23.5 4 Band C/S PEQ on every channel

1.23.6 Provides channel summing to combine input signals and send them over a single

Dante™ channel

1.23.7 Browser-based software control for all device parameters, per input channel:

Preamp gain Mute control Digital gain Polarity control Phantom power

1.23.8 1/3 Rack unit wide

1.23.9 Chassis ground screw (BLOCK version only) provides common chassis ground for multiple inputs

1.24 Quantity 2: (MSE Audio IPD-TSB2.0) Dante enabled Sound Bar

1.24.1 Material: Acrylic, two sided

1.24.2 Depth: 2.5 in / 63.5 mm - (1.5 in where the Soundbar meets the TV)

1.24.3 Height: 6.75 in / 171.45 mm

1.24.4 Width Diameter: 43 in 1092.2 mm

1.24.5 Sound Input: Rj45 Ethernet Port

1.24.6 Recommended Power: PoE, PoE+, 40W PoE, 24V Barrel Connector

1.24.7 Network Type: High Pass 12dB per octave, 2nd order

1.24.8 Tweeter Driver: (2) .75" Silk Soft Dome

1.24.9 Woofer Driver: (4) 3" Polypropylene Cones, (4) 3" Bass Radiators w/NBR Surround

1.25 Quantity 10: (MSE Audio IPD-RS82-EZ-WH) Dante enabled Speaker

1.25.1 Source Input: Rj45 Ethernet Port

1.25.2 Coverage Angle: 107°

1.25.3 Frequency Response: 80 Hz – 22kHz

1.25.4 Max SPL: 110 dB

1.26 Quantity 7: (Biamp Tesira Forte DAN VT) Digital Signal Processor

1.26.1 32 x 32 channels of digital audio networking via the Dante protocol

1.26.2 AES67-enabled Dante endpoints

1.26.3 12 mic/line level inputs with AEC, 8 mic/line level output

1.26.4 Gigabit Ethernet port

1.26.5 Up to 8 channels of configurable USB audio

1.26.6 RS-232 serial port

1.26.7 Rack mountable (1RU

1.26.8 Supports port authentication via IEEE 802.1X

1.26.9 SIP VoIP interface via a RJ-45 connector

1.26.10 Frequency Response: 20Hz to 20kHz, +4dBu output:

1.26.11 THD+N (22Hz to 22kHz): 0dB gain, +4dBu input:54dB gain, -50dBu input:

1.26.12 EIN: (no weighting, 22Hz to 22kHz):

1.26.13 Dynamic Range: (in presence of signal) 22Hz to 22kHz, 0dB

1.26.14 Input Impedance: (balanced):

1.26.15 Output Impedance: (balanced):

1.26.16 Input Gain Range: (6dB steps)

1.27 Quantity 2: (Extron DXP 1616 HD 4K PLUS 60-1497-21) Digital and Analog Multi-Plane

Modular Matrix Switcher

1.27.1 Supports computer and video resolutions up to 4K/60 @ 4:4:4

1.27.2 Supported HDMI 2.0 specification features include data rates up to 18 Gbps, HDR, Deep Color up to 12-bit, 3D, HD lossless audio formats, and CEC control

1.27.3 HDMI audio de-embedding with digital S/PDIF and analog stereo audio outputs

1.27.4 HDCP authentication and signal presence LED indicators — Front panel LED indicators for signal presence and HDCP authentication provide real time feedback and monitoring of key performance parameters.

1.27.5 Audio breakaway — Provides the capability to break an analog audio signal away from its corresponding video signal and route to audio output 2. The 4x2, 16x8, and 16x16 models allow routing of analog audio signals to any audio output.

1.27.6 RS-232 control port — Using serial commands, the matrix switcher can be integrated into a control system. Extron products use the SIS™ – Simple Instruction Set command protocol, a set of basic ASCII code commands that allow for quick and easy programing.

1.27.7 JITC Certified — Successfully completed interoperability and information assurance testing for use in government applications and other mission-critical environments.

1.28 Quantity 50: (Extron HDMI HD/6 26-754-06) 6’ HDMI Premium High Speed Optical Cables – Plenum

1.28.1 HDMI: Up to 4K (4096x2160) @ 60 Hz, UHD (3840x2160) @ 60 Hz 8-bit color depth, max. 18.0 Gbps data rate

1.28.2 Power Consumption: 225mW

1.28.3 Connector Type: 1 male type A HDMI to 1 male type A HDMI

1.28.4 Frame Rate: 24, 25, 30, 50, or 60 fps

1.28.5 Chroma Sampling: 4:4:4, 4:2:2, or 4:2:0

1.28.6 Signal Type: HDMI 2.0b, HDCP 2.3, HDR

1.29 Quantity 250: (Extron HDMI PRO P/75 26-754-12) 12’ HDMI Premium High Speed Optical

Cables – Plenum

1.29.1 HDMI: Up to 4K (4096x2160) @ 60 Hz, UHD (3840x2160) @ 60 Hz

8-bit color depth, max. 18.0 Gbps data rate

1.29.2 Power Consumption: 225mW

1.29.3 Connector Type: 1 male type A HDMI to 1 male type A HDMI

1.29.4 Frame Rate: 24, 25, 30, 50, or 60 fps

1.29.5 Chroma Sampling: 4:4:4, 4:2:2, or 4:2:0

1.29.6 Signal Type: HDMI 2.0b, HDCP 2.3, HDR

1.30 Quantity 25: (Extron HDMI PRO P/35 26-726-35) 35’ HDMI Premium High Speed Optical Cables

– Plenum

1.30.1 HDMI: Up to 4K (4096x2160) @ 60 Hz, UHD (3840x2160) @ 60 Hz

8-bit color depth, max. 18.0 Gbps data rate

1.30.2 Power Consumption: 225mW

1.30.3 Connector Type: 1 male type A HDMI to 1 male type A HDMI

1.30.4 Frame Rate: 24, 25, 30, 50, or 60 fps

1.30.5 Chroma Sampling: 4:4:4, 4:2:2, or 4:2:0

1.30.6 Signal Type: HDMI 2.0b, HDCP 2.3, HDR

1.31 Quantity 25: (Extron HDMI PRO P/50 26-726-50) 50’ HDMI Premium High Speed Optical Cables

1.31.1 HDMI: Up to 4K (4096x2160) @ 60 Hz, UHD (3840x2160) @ 60 Hz 8-bit color depth, max. 18.0 Gbps data rate

1.31.2 Power Consumption: 225mW

1.31.3 Connector Type: 1 male type A HDMI to 1 male type A HDMI

1.31.4 Frame Rate: 24, 25, 30, 50, or 60 fps

1.31.5 Chroma Sampling: 4:4:4, 4:2:2, or 4:2:0

1.31.6 Signal Type: HDMI 2.0b, HDCP 2.3, HDR

1.32 Quantity 10: (Extron HDMI PRO P/75 26-726-75) 75’ HDMI Premium High Speed Optical Cables

1.32.1 HDMI: Up to 4K (4096x2160) @ 60 Hz, UHD (3840x2160) @ 60 Hz

8-bit color depth, max. 18.0 Gbps data rate

1.32.2 Power Consumption: 225mW

1.32.3 Connector Type: 1 male type A HDMI to 1 male type A HDMI

1.32.4 Frame Rate: 24, 25, 30, 50, or 60 fps

1.32.5 Chroma Sampling: 4:4:4, 4:2:2, or 4:2:0

1.32.6 Signal Type: HDMI 2.0b, HDCP 2.3, HDR

1.33 Quantity 50: (Extron 26-713-01) DisplayPort M-HDMI F Active, 6"

1.33.1 Dongle DisplayPort Male connector to Female HDMI 6” adaptor dongle.

1.33.2 Provides connectivity between DisplayPort sources and HDMI displays and peripherals

1.33.3 Provides active conversion of DisplayPort signals to HDMI

1.33.4 Supports resolutions up to 4K/60 @ 4:4:4 with data rates up to 18 Gbps

1.33.5 Complies with VESA Interoperability Guidelines

1.33.6 HDCP compliant

1.33.7 Passes EDID information from HDMI display to the source

1.34 Quantity 50: (Extron 70-103-16) XLR and RJ-45 Barrel Plate

1.34.1 One XLR-3-Pin to solder cups-Neutrik

1.34.2 One RJ-45 Barrel – CAT 5e

2. PLACE OF DELIVERY

USFFC HQ Shipping and Receiving, BLDG NH-35

PH: 757-836-1777

MARK FOR: Tony Wallace N612, Suite 250 1562 Mitscher Ave Norfolk VA, 23551

3. REQUIRED DELIVERY DATE

12 Weeks ARO

4. TECHNICAL POINT OF CONTACT

Mr. Tony Wallace antonio.c.wallace3.civ@us.navy.mil (757)836-2733