N0018320Q0062.docx

N0018320Q0062

Section A - Solicitation/Contract Form

Administrative Data

VENDOR TO COMPLETE THE FOLLOWING:

COMPANY NAME: ______________________

Vendor POC: ____________________

Vendor email: _________________________________

Naval Medical Center Portsmouth, VA Acquisition Office

Product/Services for: Naval Medical Center Portsmouth VA

Vendor to reference RFQ Number: N0018320Q0062 on all inquiries.

PAYMENT INFORMATION; MAKE A SELECTION AS TO HOW THE MAINTENANCE WOULD BE INVOICED

Payment in Arrears (Check One): Monthly Quarterly _ Semi-Annually Annually *Please ensure that quoted price matches the choice above

PROMPT PAYMENT

For Prompt Payment Act Purposes, this contract is:

Subject to the 7-calender day constructive acceptance period.

Note: Vendor will be required to provide billing electronically via the WAWF Electronic Invoicing Method. For additional information, a review of the following web sites may be required: websites: https://wawf.eb.mil or http://wawftraining Email: usn.detrick.navmedlogcomftdmd.list.nmlc-wawf@mail.mil

DISCOUNTS

The vendor's initial response to this RFQ should reflect the Vendors' best price including all allowable discounts that are available to the Federal Government. Please identify all discounts that are being offered as part of the vendor's quote submission. The government does not intend to go out for a best and final offer.

“AVAILABILITY OF FUNDS. Pursuant to Section I, Availability of Funds (FAR 52.232-18), of the contract, funds are not presently available for this contract. The Government’s obligation under this contract is contingent upon the availability of appropriated funds from which payment for contract purposes can be made. No legal liability on the part of the Government for any payment may arise until funds are made available to the Contracting Officer for this contract and until the Contractor receives notice of such availability, to be confirmed in writing to the Contracting Officer.”

Section B - Supplies or Services and Prices

Maintenance; Tissue Processor

FFP

MANUFACTURER: SAKURA FINETEK USA

MODEL: V1P5AB1

SERIAL NUMBER: 52140314

DEPARTMENT: HISTOLOGY LAB

ECN: 061075

FOB: Destination

PURCHASE REQUEST NUMBER: N0018321RCMR062

PSC CD: J065

NET AMT

Maintenance; Tissue Processor

MANUFACTURER: SAKURA FINETEK USA

MODEL: 5214

SERIAL NUMBER: 52140431

DEPARTMENT: HISTOLOGY LAB

ECN: 068080

FOB: Destination

NET AMT

Maintenance; Cover Slipping Machine

MANUFACTURER: SAKURA FINETEK USA

MODEL: 4742

SERIAL NUMBER: 474004220308

DEPARTMENT: HISTOLOGY LAB

ECN: 100330

FOB: Destination

NET AMT

Maintenance; Cover Slipping Machine

MANUFACTURER: SAKURA FINETEK USA

MODEL: 4742

SERIAL NUMBER: 474004230308

DEPARTMENT: CYTOLOGY LAB

ECN: 100331

FOB: Destination

NET AMT

Maintenance; Cover Slipping Machine

MANUFACTURER: SAKURA FINETEK USA

MODEL: 4742

SERIAL NUMBER: 474004240308

DEPARTMENT: CYTOLOGY LAB

ECN: 100332

FOB: Destination

NET AMT

Maintenance; Cover Slipping Machine

MANUFACTURER: SAKURA FINETEK USA

MODEL: TISSUETEKFILMA1

SERIAL NUMBER: 474009220114

DEPARTMENT: HISTOLOGY LAB

ECN: 121131

FOB: Destination

NET AMT

Maintenance; Slide Stainer

MANUFACTURER: SAKURA FINETEK USA

MODEL: 6130

SERIAL NUMBER: 613007710412

DEPARTMENT: HISTOLOGY LAB

ECN: 116079

FOB: Destination

NET AMT

Maintenance; Slide Stainer

MANUFACTURER: SAKURA FINETEK USA

MODEL: 6130

SERIAL NUMBER: 613007720412

DEPARTMENT: HISTOLOGY LAB

ECN: 116080

FOB: Destination

NET AMT

FFP

MANUFACTURER: SAKURA FINETEK USA

MODEL: V1P5AB1

SERIAL NUMBER: 52140314

DEPARTMENT: HISTOLOGY LAB

ECN: 061075

FOB: Destination

NET AMT

FFP

MANUFACTURER: SAKURA FINETEK USA

MODEL: 5214

SERIAL NUMBER: 52140431

DEPARTMENT: HISTOLOGY LAB

ECN: 068080

NET AMT

FFP

MANUFACTURER: SAKURA FINETEK USA

MODEL: 4742

SERIAL NUMBER: 474004220308

DEPARTMENT: HISTOLOGY LAB

ECN: 100330

NET AMT

FFP

MANUFACTURER: SAKURA FINETEK USA

MODEL: 4742

SERIAL NUMBER: 474004230308

DEPARTMENT: CYTOLOGY LAB

ECN: 100331

NET AMT

FFP

MANUFACTURER: SAKURA FINETEK USA

MODEL: 4742

SERIAL NUMBER: 474004240308

DEPARTMENT: CYTOLOGY LAB

ECN: 100332

NET AMT

FFP

MANUFACTURER: SAKURA FINETEK USA

MODEL: TISSUETEKFILMA1

SERIAL NUMBER: 474009220114

DEPARTMENT: HISTOLOGY LAB

ECN: 121131

NET AMT

FFP

MANUFACTURER: SAKURA FINETEK USA

MODEL: 6130

SERIAL NUMBER: 613007710412

DEPARTMENT: HISTOLOGY LAB

ECN: 116079

NET AMT

FFP

MANUFACTURER: SAKURA FINETEK USA

MODEL: 6130

SERIAL NUMBER: 613007720412

DEPARTMENT: HISTOLOGY LAB

ECN: 116080

NET AMT

FFP

MANUFACTURER: SAKURA FINETEK USA

MODEL: V1P5AB1

SERIAL NUMBER: 52140314

DEPARTMENT: HISTOLOGY LAB

ECN: 061075

NET AMT

FFP

MANUFACTURER: SAKURA FINETEK USA

MODEL: 5214

SERIAL NUMBER: 52140431

DEPARTMENT: HISTOLOGY LAB

ECN: 068080

NET AMT

FFP

MANUFACTURER: SAKURA FINETEK USA

MODEL: 4742

SERIAL NUMBER: 474004220308

DEPARTMENT: HISTOLOGY LAB

ECN: 100330

NET AMT

FFP

MANUFACTURER: SAKURA FINETEK USA

MODEL: 4742

SERIAL NUMBER: 474004230308

DEPARTMENT: CYTOLOGY LAB

ECN: 100331

NET AMT

FFP

MANUFACTURER: SAKURA FINETEK USA

MODEL: 4742

SERIAL NUMBER: 474004240308

DEPARTMENT: CYTOLOGY LAB

ECN: 100332

NET AMT

FFP

MANUFACTURER: SAKURA FINETEK USA

MODEL: TISSUETEKFILMA1

SERIAL NUMBER: 474009220114

DEPARTMENT: HISTOLOGY LAB

ECN: 121131

NET AMT

FFP

MANUFACTURER: SAKURA FINETEK USA

MODEL: 6130

SERIAL NUMBER: 613007710412

DEPARTMENT: HISTOLOGY LAB

ECN: 116079

NET AMT

FFP

MANUFACTURER: SAKURA FINETEK USA

MODEL: 6130

SERIAL NUMBER: 613007720412

DEPARTMENT: HISTOLOGY LAB

ECN: 116080

NET AMT

FFP

MANUFACTURER: SAKURA FINETEK USA

MODEL: V1P5AB1

SERIAL NUMBER: 52140314

DEPARTMENT: HISTOLOGY LAB

ECN: 061075

NET AMT

FFP

MANUFACTURER: SAKURA FINETEK USA

MODEL: 5214

SERIAL NUMBER: 52140431

DEPARTMENT: HISTOLOGY LAB

ECN: 068080

NET AMT

FFP

MANUFACTURER: SAKURA FINETEK USA

MODEL: 4742

SERIAL NUMBER: 474004220308

DEPARTMENT: HISTOLOGY LAB

ECN: 100330

NET AMT

FFP

MANUFACTURER: SAKURA FINETEK USA

MODEL: 4742

SERIAL NUMBER: 474004230308

DEPARTMENT: CYTOLOGY LAB

ECN: 100331

NET AMT

FFP

MANUFACTURER: SAKURA FINETEK USA

MODEL: 4742

SERIAL NUMBER: 474004240308

DEPARTMENT: CYTOLOGY LAB

ECN: 100332

NET AMT

FFP

MANUFACTURER: SAKURA FINETEK USA

MODEL: TISSUETEKFILMA1

SERIAL NUMBER: 474009220114

DEPARTMENT: HISTOLOGY LAB

ECN: 121131

NET AMT

FFP

MANUFACTURER: SAKURA FINETEK USA

MODEL: 6130

SERIAL NUMBER: 613007710412

DEPARTMENT: HISTOLOGY LAB

ECN: 116079

NET AMT

FFP

MANUFACTURER: SAKURA FINETEK USA

MODEL: 6130

SERIAL NUMBER: 613007720412

DEPARTMENT: HISTOLOGY LAB

ECN: 116080

NET AMT

FFP

MANUFACTURER: SAKURA FINETEK USA

MODEL: V1P5AB1

SERIAL NUMBER: 52140314

DEPARTMENT: HISTOLOGY LAB

ECN: 061075

NET AMT

FFP

MANUFACTURER: SAKURA FINETEK USA

MODEL: 5214

SERIAL NUMBER: 52140431

DEPARTMENT: HISTOLOGY LAB

ECN: 068080

NET AMT

FFP

MANUFACTURER: SAKURA FINETEK USA

MODEL: 4742

SERIAL NUMBER: 474004220308

DEPARTMENT: HISTOLOGY LAB

ECN: 100330

NET AMT

FFP

MANUFACTURER: SAKURA FINETEK USA

MODEL: 4742

SERIAL NUMBER: 474004230308

DEPARTMENT: CYTOLOGY LAB

ECN: 100331

NET AMT

FFP

MANUFACTURER: SAKURA FINETEK USA

MODEL: 4742

SERIAL NUMBER: 474004240308

DEPARTMENT: CYTOLOGY LAB

ECN: 100332

NET AMT

FFP

MANUFACTURER: SAKURA FINETEK USA

MODEL: TISSUETEKFILMA1

SERIAL NUMBER: 474009220114

DEPARTMENT: HISTOLOGY LAB

ECN: 121131

NET AMT

FFP

MANUFACTURER: SAKURA FINETEK USA

MODEL: 6130

SERIAL NUMBER: 613007710412

DEPARTMENT: HISTOLOGY LAB

ECN: 116079

NET AMT

FFP

MANUFACTURER: SAKURA FINETEK USA

MODEL: 6130

SERIAL NUMBER: 613007720412

DEPARTMENT: HISTOLOGY LAB

ECN: 116080

FOB: Destination

NET AMT

Section C - Descriptions and Specifications

PERFORMANCE WORK STATEMENT (PWS)

Maintenance Services for Biomed Dept.-Naval Medical Center Portsmouth

PART 1

SCOPE OF WORK

1. GENERAL: This is a non-personal services contract to provide full contract support immediately upon award of a resulting order. The Government shall not exercise any supervision or control over the contract service providers performing the services herein. Such contract service providers shall be accountable solely to the Contractor who, in turn is responsible to the Government.

1.1 Description of Services/Introduction: The contractor shall provide all personnel, equipment, supplies, facilities, transportation, tools, materials, supervision, and other items and non-personal services necessary to provide full maintenance support for the items listed in Section B and all support items / components as defined in this PWS except for those items specified as government furnished property and services. The contractor shall perform to the standards in this contract.

1.2 Background: The Government shall maintain the right to seek proof of qualification prior to award and anytime during contract period of performance. Additionally contractor must have ready access to parts inventory of OEM replacement parts.

1.3 Objectives: Equipment listed in this contract will be maintained to meet the original equipment manufacturer’s (OEM) specifications.

1.4 Scope: This contract shall provide for maintenance services which include on-site corrective repairs, normal working hour coverage (8:00 A.M. to 4:30 P.M. Monday through Friday excluding Federal holidays); emergency service and routine preventive maintenance services to Department of Defense owned equipment, as listed on the: DD Form 1155 “Order for Supplies or Services”. It shall include all systems, subsystem components, and assemblies, (i.e.: contractor responsible for total maintenance of entire system). All maintenance provisions shall apply to hardware, firmware, and software, as appropriate, unless otherwise stated.

1.5 Period of Performance: The period of performance shall be for one (1) base year plus four (4) option years.

GENERAL INFORMATION

1.6 Quality Control The contractor shall develop and maintain an effective QCP to ensure services are performed in accordance with this PWS. The contractor shall develop and implement procedures to identify, prevent, and ensure non-recurrence of defective services. The contractor’s quality control program is the means by which the contractor assures that the work performance complies with the contract requirements of the contract. [The QCP is to be delivered, within 30 days after contract award or with the contractor’s proposal if it is an evaluation factor, three copies of a comprehensive written QCP shall be submitted to the Contracting Officer (KO) and Contracting Officer Representative (COR) within 5 working days when changes are made thereafter.] After acceptance of the QSP the contractor shall receive the KO’s acceptance in writing of any proposed change to the QC system.

1.7 Quality Assurance: The government shall evaluate the contractor’s performance under this contract in accordance with the Quality Assurance Surveillance Plan (QASP). This plan is primarily focused on what the Government must do to ensure that the contractor has performed in accordance with the performance standards. It defines how the performance standards will be applied, the frequency of surveillance, and the minimum acceptable defect rate(s).

1.8 Recognized Holidays:

1.9 Hours of Operation: The contractor is responsible for conducting business, between the hours of 8:00 A.M. to 4:30 P.M., Monday thru Friday except Federal holidays or when the Government facility is closed due to local or national emergencies, administrative closings, or similar Government directed facility closings. The Contractor must at all times maintain an adequate workforce for the uninterrupted performance of all tasks defined within this PWS when the Government facility is not closed for the above reasons. When hiring personnel, the Contractor shall keep in mind that the stability and continuity of the workforce are essential.

1.10 Place of Performance: The work to be performed under this contract will be at a government facility.

1.11 Type of Contract: The government will award a FFP Contract.

1.12 PHYSICAL Security: The contractor shall be responsible for safeguarding all government equipment, information and property provided for contractor use. At the close of each work period, government facilities, equipment, and materials shall be secured.

1.13 Key Control The Contractor shall establish and implement methods of making sure all keys/key cards issued to the Contractor by the Government are not lost or misplaced and are not used by unauthorized persons. NOTE: All references to keys include key cards. No keys issued to the Contractor by the Government shall be duplicated. The Contractor shall develop procedures covering key control that shall be included in the QCP. Such procedures shall include turn-in of any issued keys by personnel who no longer require access to locked areas. The Contractor shall immediately report any occurrences of lost or duplicate keys/key cards to the KO.

1.13.01 In the event keys, other than master keys, are lost or duplicated, the Contractor shall, upon direction of the Contracting Officer, re-key or replace the affected lock or locks; however, the Government, at its option, may replace the affected lock or locks or perform re-keying. When the replacement of locks or re-keying is performed by the Government, the total cost of re-keying or the replacement of the lock or locks shall be deducted from the monthly payment due the Contractor. In the event a master key is lost or duplicated, all locks and keys for that system shall be replaced by the Government and the total cost deducted from the monthly payment due the Contractor.

1.13.02 The Contractor shall prohibit the use of Government issued keys/key cards by any persons other than the Contractor’s employees. The Contractor shall prohibit the opening of locked areas by Contractor employees to permit entrance of persons other than Contractor employees engaged in the performance of assigned work in those areas, or personnel authorized entrance by the Contracting Officer.

1.13.02.1.1 Lock Combinations The Contractor shall establish and implement methods of ensuring that all lock combinations are not revealed to unauthorized persons. The Contractor shall ensure that lock combinations are changed when personnel having access to the combinations no longer have a need to know such combinations. These procedures shall be included in the Contractor’s QCP

1.14 Special Qualifications: The contractor is responsible for ensuring all employees possess and maintain current Information Assurance Technician (IAT) Level I professional certification during the execution of this contract.

1.14.01 The Contractor shall provide trained, experienced, English speaking personnel, labor, tools, diagnostic equipment, software, test phantoms, material, supplies, transportation, parts and equipment necessary to perform Preventive Maintenance (PM), Calibration (CAL), Safety testing (ST) and corrective maintenance.

1.14.02 The Contractor shall provide telephonic communications with the Government to discuss technical matters relating to the performance of this contract. A systems operator will be made available to answer technical questions regarding system operations and applications.

1.14.03 The Contractor Point of Contact (POC). Service calls shall be placed 24 hours a day, 7 days a week by calling a vendor supplied toll free response center. Qualified service reps are required to make a “best effort” to call back within 4-hours during normal business hours (8am – 5pm CST / Monday – Friday excluding Federal Holidays) to schedule service visit.

1.15 Contracting Officer Representative (COR): The COR will be identified by COR Appointment letter. The COR monitors all technical aspects of the contract and assists in contract administration. The COR is authorized to perform the following functions: assure that the Contractor performs the technical requirements of the contract: perform inspections necessary in connection with contract performance: maintain written and oral communications with the Contractor concerning technical aspects of the contract: issue written interpretations of technical requirements; including Government drawings; designs; specifications; monitor Contractor's performance and notify both the KO and Contractor of any deficiencies; coordinate availability of government furnished property, and provide site entry of Contractor personnel. A letter of designation issued to the COR, a copy of which is sent to the Contractor, states the responsibilities and limitations of the COR, especially with regard to changes in cost or price, estimates or changes in delivery dates. The COR is not authorized to change any of the terms and conditions of the contract

1.16 Identification of Contractor Employees: All contract personnel attending meetings, answering Government telephones, and working in other situations where their contractor status is not obvious to third parties are required to identify themselves as such to avoid creating an impression in the minds of members of the public that they are Government officials. They must also ensure that all documents or reports produced by contractors are suitably marked as contractor products or that contractor participation is appropriately disclosed.

1.16.01 Contractors shall wear identifying badges at all times when conducting business inside a government facility.

1.16.02 To obtain a gate pass, refer to http://dbids.dmdc.mil/#!/register

1.17 Contractor Travel : Contractor will be required to travel CONUS during the performance of this contract to attend meetings, conferences, and training. The contractor may be required to travel to off-site training locations and to ship training aids to these locations in support of this PWS. Contractor will be authorized travel expenses consistent with the substantive provisions of the Joint Travel Regulation (JTR) and the limitation of funds specified in this contract. All travel requires Government approval/authorization and notification to the COR.

1.18 Other Direct Costs: This category includes travel, reproduction, and shipping expenses associated with training activities and visits to contractor facilities.

1.19 Data Rights : The Government has unlimited rights to all documents/material produced under this contract. All documents and materials, to include the source codes of any software, produced under this contract shall be Government owned and are the property of the Government with all rights and privileges of ownership/copyright belonging exclusively to the Government. These documents and materials may not be used or sold by the contractor without written permission from the KO. All materials supplied to the Government shall be the sole property of the Government and may not be used for any other purpose. This right does not abrogate any other Government rights.

1.20 Organizational Conflict of Interest : It is the contractor’s responsibility to notify the KO of any potential Organizational Conflict of Interest (OCI). In the event that an OCI exist the contractor shall propose a Mitigation plan that shall be reviewed and accepted by the KO prior to continuance of the work that presents an OCI. Should the proposed Mitigation Plan is not accepted by the KO, the Government may terminate this contract, disqualify the Contractor from subsequent contractual efforts, and pursue any remedies as may be permitted by the law or this contract.

PART 2

DEFINITIONS & ACRONYMS

DEFINITIONS AND ACRONYMS:

DEFINITIONS

CONTRACTOR. A supplier or vendor awarded a contract to provide specific supplies or service to the government. The term used in this contract refers to the prime.

CONTRACTING OFFICER (KO). A person with authority to enter into, administer, and/or terminate contracts, and make related determinations and findings on behalf of the government. This is the only individual who can legally bind the government.

CONTRACTING OFFICER'S REPRESENTATIVE (COR). An employee of the U.S. Government appointed by the contracting officer to administer the contract. Such appointment shall be in writing and shall state the scope of authority and limitations. This individual has authority to provide technical direction to the Contractor as long as that direction is within the scope of the contract, does not constitute a change, and has no funding implications. This individual does NOT have authority to change the terms and conditions of the contract.

DEFECTIVE SERVICE. A service output that does not meet the standard of performance associated with the Performance Work Statement.

DELIVERABLE. Anything that can be physically delivered, but may include non-manufactured things such as meeting minutes or reports.

KEY PERSONNEL. Contractor personnel that are evaluated in a source selection process and that may be required to be used in the performance of a contract by the Key Personnel listed in the PWS. When key personnel are used as an evaluation factor in best value procurement, an offer can be rejected if it does not have a firm commitment from the persons that are listed in the proposal.

PHYSICAL SECURITY. Actions that prevent the loss or damage of Government property.

QUALITY ASSURANCE. The government procedures to verify that services being performed by the Contractor are performed according to acceptable standards.

QUALITY ASSURANCE SURVEILLANCE PLAN (QASP). An organized written document specifying the surveillance methodology to be used for surveillance of contractor performance.

QUALITY CONTROL. All necessary measures taken by the Contractor to assure that the quality of an end product or service meet contract requirements.

SUBCONTRACTOR. One that enters into a contract with a prime contractor. The Government does not have privity of contract with the subcontractor.

WORK DAY. The number of hours per day the Contractor provides services in accordance with the contract.

WORK WEEK. Monday through Friday, unless specified otherwise.

ACRONYMS:

PART 3

GOVERNMENT FURNISHED PROPERTY, EQUIPMENT, AND SERVICES

GOVERNMENT FURNISHED ITEMS AND SERVICES:

The government will be responsible for maintaining the proper environment, including utilities and site requirements necessary for the system to function properly as specified by the OEM.

The Government will operate the system in accordance with the instruction manual provided by the OEM.

PART 4.0

4 CONTRACTOR FURNISHED ITEMS AND SPECIFIC TASKS

4.1 Government furnished property, Materials and Services.

The Contractor representative(s) at each site is encouraged to request a pre-maintenance inspection prior to the onset of the contract. As all apparent discrepancies must be identified upon submittal of quote, any and all claims must be received within 30 days of contract award or prior to contract start whichever occurs first. All non-apparent / hidden discrepancies must be identified no later than the first scheduled preventative maintenance. Any claims resulting from hidden defects must be received within 30 days of first scheduled preventative maintenance. Any equipment found to be inoperable during this pre-maintenance inspection would be repaired using a separate purchase order. The cost of repairs shall not exceed contractor’s normal retail rate for required repairs. The government certifies that the equipment to be maintained under this contract will be in good operating condition on the effective date of this contract. For the purpose of this contract, the clause, “good operating condition” means the conditions necessary for the equipment to function as intended without corrective maintenance. The Contractor agrees to leave the equipment in good operating condition at the expiration of this contract. During the final week of this contract, the Government will make final inspection of the equipment. Any correction of deficiencies noted during this inspection shall be resolved prior to contract end. The Government reserves the right to request the repair (at no additional cost to the Government) of items identified with latten defects after contract termination, when it has been determined that defects either are a result of contractor’s performance or should have been discovered during normal performance of work under this contract.

4.1.2 The Government will not be responsible for the damage or loss due to fire, theft, accident, or other disaster of Contractor supplies, materials, or for the personal belongings brought onto Government property by Contractor’s personnel.

4.2 Contractor Furnished Property and Material.

The Contractor shall provide all service literature, reference publications, laptop computers and diagnostic software to be used by the contractor service technicians and as required for the completion of the services in accordance with this contract.

4.2.1 Replacement Parts.

The Contractor shall have ready access to unique and/or high mortality replacement parts. All parts supplied shall be compatible with the existing system. In the event that replacements parts are required to be shipped. Shipping shall be performed in the fastest reasonable means possible (i.e., next day air) at no additional cost to the Government.

4.2.2 The Contractor shall at their expense, replace all worn or defective parts necessary to restore the equipment to 100% operational condition as specified by the OEM. Vendor is not responsible for consumable items.

4.2.3 Contractor installed replacement parts shall become the property of the Government and the replaced malfunctioning part shall become the property of the Contractor. Replaced items shall be properly disposed of at no additional cost to the Government (contractor to pay all “environmental fees” where required).

4.2.4 Freight, postage, and storage charges associated with shipment and receipt of replacement parts, and the return of parts shall be the responsibility of the Contractor.

4.2.5 All replacement parts shall be new and certified as OEM replacement parts. In the event that new parts are not available, rebuilt parts and sub-assemblies are allowed provided that they are warranted to be free of defects for a period of time that meets or exceeds warranties of similar replacement parts. The contractor shall specifically annotate on the final Field Service report the use and identification of rebuilt parts and the period of warranty. When discrepancies occur, the Government will make the final determination on whether a replacement part is of equal or better quality. Replacement parts must maintain the integrity of system / equipment certification to include compliance with any UL, AMA, JACHO, Manufactures Certifications or any other certifications as they apply.

4.2.6 The Contractor must include software revisions and updates (field service changes), which are required due to FDA, or manufacturer announced safety-hazard recall, to include FDA Year 2000 Compliance Directive, as part of the contract at no additional cost to the Government. Updates shall be performed as soon as possible after release, but no later than the first scheduled Preventative Maintenance Inspection after release. For any updates that have been identified as critical, or required for the proper operation of equipment by the OEM, contractor shall provide installation within 30 days of release regardless of Preventative Maintenance Schedules.

4.2.7 The Contractor shall at their expense, replace all worn or defective parts necessary to restore the equipment to 100% operational condition as specified by the OEM. Vendor is not responsible for consumable items.

4.2.8 Contractor installed replacement parts shall become the property of the Government and the replaced malfunctioning part shall become the property of the Contractor. Replaced items shall be properly disposed of at no additional cost to the Government (contractor to pay all “environmental fees” where required).

4.2.9 Freight, postage, and storage charges associated with shipment and receipt of replacement parts, and the return of parts shall be the responsibility of the Contractor.

4.2.10 All replacement parts shall be new and certified as OEM replacement parts. In the event that new parts are not available, rebuilt parts and sub-assemblies are allowed provided that they are warranted to be free of defects for a period of time that meets or exceeds warranties of similar replacement parts. The contractor shall specifically annotate on the final Field Service report the use and identification of rebuilt parts and the period of warranty. When discrepancies occur, the Government will make the final determination on whether a replacement part is of equal or better quality. Replacement parts must maintain the integrity of system / equipment certification to include compliance with any UL, AMA, JACHO, Manufactures Certifications or any other certifications as they apply.

4.2.11 The Contractor must include software revisions and updates (field service changes), which are required due to FDA, or manufacturer announced safety-hazard recall, to include FDA Year 2000 Compliance Directive, as part of the contract at no additional cost to the Government. Updates shall be performed as soon as possible after release, but no later than the first scheduled Preventative Maintenance Inspection after release. For any updates that have been identified as critical, or required for the proper operation of equipment by the OEM, contractor shall provide installation within 30 days of release regardless of Preventative Maintenance Schedules.

4.3 Contractor Report Requirements.

During normal duty hours, Contracted Field Service Engineer (FSE) personnel shall check-in with the Biomedical Engineering Division upon arrival at the Government site and again prior to departure. (Biomedical Engineering located in Build-250 1st floor; 757-953-5336). The Contractor FSEs shall personally notify Biomedical Engineering (BME) of problems that result in the equipment being left disabled upon their departure. After normal duty hours, Contractor FSE’s shall notify the Officer of the Day Desk (Bldg 2, 2nd Floor) and the systems operator designated by BME.

4.3.1 The Contractor shall provide to BME a full service report within two (2) days after completion of all service performed. The service report shall include, but not be limited to: contract number, equipment description (model, serial number, equipment control number) contractor’s log number, detailed description of the service(s) performed, replacement part(s) information (part number, part value, nomenclature, unit price, manufacturer, if not OEM, and whether the part is new/used/reconditioned), the completion date and time, man-hours expended, model and serial numbers, and the name of the FSE performing the service. In the event that agents / sub-contractors are used in the performance of repairs, said agent shall be identified on the service report by company name and contact information (i.e., telephone number). Additionally contractor will be required to affix a tag on equipment upon the completion of a preventative maintenance inspection. Tag may either be a “sticker” or “hanging tag”. As a minimum the tag shall contain: the name of the contractor, technician performing inspection and date of inspection legibly printed.

4.4 Contractor Responsibility.

4.4.1 The Contractor shall be responsible for the repair/replacement of damaged Government owned equipment and property due to the negligence of the Contractor or his representatives. All such replacement or repair shall be at the Contractor’s expense and shall be inspected to the satisfaction of the KO or appointed representative.

4.5 Preventive Maintenance Services.

4.5.1 In accordance with Naval Medical Logistics Command (NAVMEDLOGCOM) Risk Assessment Criteria, preventive maintenance shall be performed once a year in accordance with the Original Equipment Manufacturers (OEM) recommendations.

4.5.2 (The Government Fiscal Year runs: October through September). The Contractor shall make a best effort to schedule and complete preventive maintenance services prior to the 15th of the selected month, but no later than the last day of the month.

AS REQUESTED BY BIOMED

4.5.3 All test equipment used in the performance of this contract must be calibrated (if required / as required by manufacture of test equipment) and shall be in compliance with Joint Commission on Accreditation of Healthcare Organizations (JCAHO), Original Equipment Manufacturer (OEM) and Federal Drug Administration (FDA) standards as required.

4.6 Corrective Maintenance.

4.6.1 Normal working hour maintenance coverage will be Monday through Friday, between 8:00 A.M. to 4:30 P.M. A contractor Service Tech shall respond via telephone within 4 hours after receipt of trouble call, and make a best effort to provide on-site service no later than the close of business (4:30 pm) on the next business day. Vendor is to make a best effort to have all equipment operational within 72 hours of initial on-site response.

4.6.2 In the event that emergency service outside the normal working hours are required by the Government, additional work shall be billable to the Government at published commercial rates, and negotiated and approved by a Contracting Officer prior to services rendered.

4.6.3 Government request for corrective maintenance will be placed by BME, to the Contractor’s POC. Corrective Maintenance shall be completed during the hours specified in the contract.

4.6.4 The Contractor shall assign a unique Log/Reference Number to each Government request for corrective Maintenance.

4.6.5 Contractor’s response to requests for service may include telephone consultation with the equipment user/operator and a Contractor FSE. Telephone consultation shall: 1) provide instruction in determining operator error; 2) to determine the most likely cause of the problem; 3) to determine if resolution of the problem requires the dispatch of a FSE; and 4) to identify replacement parts likely to be required in order to return the equipment to 100% operational condition as specified by the OEM.

4.6.6 Contractor’s pricing shall be inclusive of all cost including parts, labor, travel and shipping, unless otherwise indicated. Any/all exclusions are listed as follows:

No Exclusions

4.6.7 The Contractor shall have his/her own service manuals, specifications, schematic diagrams, and parts lists to assist in the evaluation/repair of all equipment included in this contract.

4.7 Removal of Government Property.

4.7.1 Whenever the repair of equipment cannot be performed at the Government site as determined by the Contractor, the Contractor shall notify BME who will make arrangements for the Contractor to remove the item to the Contractor’s designated site. The Contractor may be required to sign a Government form accepting responsibility for the Government equipment. The Contractor shall provide a detailed description of removed items. For associated items / accessories, contractor to provide a detailed description and quantities of items to be removed. Description to include as a minimum manufacturers serial numbers and equipment control number (ECN) of all equipment / items removed. In the event that items / sub-assemblies / accessories are repaired via “Repair by Replacement” a detailed description of replaced items is to be included upon return of repaired components.

4.7.2 All charges resulting from a Contractor determined requirement to transport Government owned property, covered by this contract, to and from an alternate repair location shall be the responsibility of the Contractor.

4.8 Equipment Modification Upgrades.

4.8.1 The Contractor shall only incorporate OEM specified modifications, alterations and upgrades. Approval shall be obtained from BME prior to the Contractor installation of any modification, alteration, or upgrades.

4.8.2 The Contractor shall maintain contact with the OEM to determine the requirement for field modifications and to ensure accomplishment of these modifications in accordance with the time schedule set forth by the OEM.

4.8.3 The Government shall not alter the system without prior notification to the Contractor.

4.8.4 The contractor at no additional cost shall provide software updates to the Government. Installation of updates will be left to the discretion of the Government. All supplied software is to be warranted current and free of defects such as viruses.

4.9 Service beyond the Scope of the Contract.

4.9.1 The Contractor shall immediately, but not later than 24 consecutive hours after discovery, notify BME, in writing, of the existence or the development of any defects in, or repair required to the scheduled equipment, which the Contractor considers they are not responsible for under the terms of this contract.

4.9.2 At the same time of the notification, the Contractor shall furnish BME with written estimate of the cost to make the necessary repairs. Repairs considered by the Contracting Officer to be outside the scope of this contract shall not be covered under this contract, but shall be ordered under a separate purchase order.

PART 5

APPLICABLE PUBLICATIONS

5 APPLICABLE PUBLICATIONS (CURRENT EDITIONS)

5.4 The Contractor must abide by all applicable regulations, publications, manuals, and local policies and procedures.

PART 6

ATTACHMENT/TECHNICAL EXHIBIT LISTING

6 Attachment List:

6.4 Attachment 1– Quality Assurance Surveillance Plan (QASP)

Contractor Unclassified Access to Federally Controlled Facilities, Sensitive Information, Information Technology (IT) Systems or Protected Health Information (Jan 2017)

Homeland Security Presidential Directive (HSPD)-12, requires government agencies to develop and implement Federal security standards for Federal employees and contractors. The Deputy Secretary of Defense Directive-Type Memorandum (DTM) 08-006 – “DoD Implementation of Homeland Security Presidential Directive – 12 (HSPD-12)” dated November 26, 2008 (or its subsequent DoD instruction) directs implementation of HSPD-12. This clause is in accordance with HSPD-12 and its implementing directives.

APPLICABILITY

This text applies to contractor employees requiring physical access to any area of a federally controlled base, facility or activity and/or requiring access to a DoN or DoD computer/network/system to perform certain unclassified sensitive duties. This clause also applies to contractor employees who access Privacy Act and Protected Health Information, provide support associated with fiduciary duties, or perform duties that have been identified as National Security Position, as advised by the command security manager. It is the responsibility of the responsible security officer of the command/facility where the work is performed to ensure compliance.

Each contractor employee providing services at a Navy Command under this contract is required to obtain a Department of Defense Common Access Card (DoD CAC). Additionally, depending on the level of computer/network access, the contract employee will require a successful investigation as detailed below.

ACCESS TO FEDERAL FACILITIES

Per HSPD-12 and implementing guidance, all contractor employees working at a federally controlled base, facility or activity under this clause will require a DoD CAC. When access to a base, facility or activity is required contractor employees shall in-process with the Command’s Security Manager upon arrival to the Command and shall out-process prior to their departure at the completion of the individual’s performance under the contract.

ACCESS TO DOD IT SYSTEMS

In accordance with SECNAV M-5510.30, contractor employees who require access to DoN or DoD networks are categorized as IT-I, IT-II, or IT-III. The IT-II level, defined in detail in SECNAV M-5510.30, includes positions which require access to information protected under the Privacy Act, to include Protected Health Information (PHI). All contractor employees under this contract who require access to Privacy Act protected information are therefore categorized no lower than IT-II. IT Levels are determined by the requiring activity’s Command Information Assurance Manager.

Contractor employees requiring privileged or IT-I level access, (when specified by the terms of the contract) require a Single Scope Background Investigation (SSBI) or T5 or T5R equivalent investigation , which is a higher level investigation than the National Agency Check with Law and Credit (NACLC)/T3/T3R described below. Due to the privileged system access, an investigation suitable for High Risk national security positions is required. Individuals who have access to system control, monitoring, or administration functions (e.g. system administrator, database administrator) require training and certification to Information Assurance Technical Level 1, and must be trained and certified on the Operating System or Computing Environment they are required to maintain.

Access to sensitive IT systems is contingent upon a favorably adjudicated background investigation. When access to IT systems is required for performance of the contractor employee’s duties, such employees shall in-process with the Navy Command’s Security Manager and Information Assurance Manager upon arrival to the Navy command and shall out-process prior to their departure at the completion of the individual’s performance under the contract. Completion and approval of a System Authorization Access Request Navy (SAAR-N) form is required for all individuals accessing Navy Information Technology resources. The decision to authorize access to a government IT system/network is inherently governmental. The contractor supervisor is not authorized to sign the SAAR-N; therefore, the government employee with knowledge of the system/network access required or the COR shall sign the SAAR-N as the “supervisor”.

The SAAR-N shall be forwarded to the Command’s Security Manager at least 30 days prior to the individual’s start date. Failure to provide the required documentation at least 30 days prior to the individual’s start date may result in delaying the individual’s start date.

When required to maintain access to required IT systems or networks, the contractor shall ensure that all employees requiring access complete annual Information Assurance (IA) training, and maintain a current requisite background investigation. The Contractor’s Security Representative shall contact the Command Security Manager for guidance when reinvestigations are required.

INTERIM ACCESS

The Command's Security Manager may authorize issuance of a DoD CAC and interim access to a DoN or DoD unclassified computer/network upon a favorable review of the investigative questionnaire and advance favorable fingerprint results. When the results of the investigation are received and a favorable determination is not made, the contractor employee working on the contract under interim access will be denied access to the computer network and this denial will not relieve the contractor of his/her responsibility to perform.

DENIAL OR TERMINATION OF ACCESS

The potential consequences of any requirement under this clause including denial or termination of physical or system access in no way relieves the contractor from the requirement to execute performance under the contract within the timeframes specified in the contract. Contractors shall plan ahead in processing their employees and subcontractor employees. The contractor shall insert this clause in all subcontracts when the subcontractor is permitted to have unclassified access to a federally controlled facility, federally-controlled information system/network and/or to government information, meaning information not authorized for public release.

CONTRACTOR’S SECURITY REPRESENTATIVE

The contractor shall designate an employee to serve as the Contractor’s Security Representative. Within three work days after contract award, the contractor shall provide to the requiring activity’s Security Manager and the Contracting Officer, in writing, the name, title, address and phone number for the Contractor’s Security Representative. The Contractor’s Security Representative shall be the primary point of contact on any security matter. The Contractor’s Security Representative shall not be replaced or removed without prior notice to the Contracting Officer and Command Security Manager.

BACKGROUND INVESTIGATION REQUIREMENTS AND SECURITY APPROVAL PROCESS FOR CONTRACTORS ASSIGNED TO NATIONAL SECURITY POSITIONS OR PERFORMING SENSITIVE DUTIES

Navy security policy requires that all positions be given a sensitivity value based on level of risk factors to ensure appropriate protective measures are applied. Contractor employees under this contract are recognized as Non-Critical Sensitive [ADP/IT-II] positions when the contract scope of work require physical access to a federally controlled base, facility or activity and/or requiring access to a DoD computer/network, to perform unclassified sensitive duties.