RFQ_19-Q-0168.docx

N0018319Q0168

Section A - Solicitation/Contract Form

VENDOR TO COMPLETE THE FOLLOWING:

TIN:

CAGE:

DUNS:

Vendor Point of Contact:

Vendor Phone:

Vendor Fax:

Vendor E-Mail:

Vendor shall include along with quote an invoice(s) with the same/similar items or a Published Price List.

Vendor shall include along with quote a current GSA/VA FSS Contract (Ordering Information/Terms & Conditions/Pricing) and complete the following information. (if applicable)

GSA/VA FSS Contract Number:_________________________________________

Expiration Date: Maximum Order Limitation:

Special Item Number (SIN): FSC:

NOTICE: Should the Contractor's FSS/GSA contract expires during the requested period of performance, including option years, the following information will be listed in Section A of the contract award document:

"The terms and conditions of this contract award are in accordance with your FSS/GSA contract _______________ which expires ______________. It is anticipated that your FSS/GSA contract will be renewed. At that time, the Naval Medical Center reserves the right to review the renewed contract and issue a modification, if needed, to either cancel the remaining services or revise the terms and conditions to reflect the new period of performance; however, all pricing herein are guaranteed for the entire period of performance, including option years.

VENDOR shall reference Request for Quotation (RFQ) Number N0018319Q0168 on all correspondence relating to this RFQ.

PAYMENT INFORMATION:

Invoice/Payment,, Net 30 Days

Payment in Arrears (Check One): Monthly Quarterly Semi-Annually Annually

NOTE: Payment for all supplies/services will be in arrears. Vendor may choose to invoice monthly, quarterly, semi-annually or annually. Invoice shall be submitted on or after the selected period of performance end date (i.e., if “annually” is selected, vendor will not receive payment until the end of the period of performance date). Invoice payments are made Net 30 Days upon certification in WAWF.

NOTE: Vendor will be required to provide billing electronically via the WAWF Electronic Invoicing Method per Section G of this RFQ. For additional information, a review of the following web sites may be required: https://wawf.eb.mil; http://wawftraining; Email: usn.detrick.navmedlogcomftdmd.list.nmlc-wawf@mail.mil

PROMPT PAYMENT: For Prompt Payment Act purposes, this contract is subject to the 7-calendar day constructive acceptance period.

NOTE TO BIDDERS:

Vendor required to quote as stated.

The Government will make the award based on an “All or None” determination and/or based on a “Best Value” determination.

Best Value Evaluation factors are technical capability (ability to provide items as specified), technical, and price with each factor weighted equally. In addition, priority consideration will be given to federal supply schedule holders quoting items under GSA/FSS contracts. The Government reserves the right to eliminate quotes, without discussion, that are deemed technically unacceptable. Technically unacceptable offers are not eligible for contract award.

Section B - Supplies or Services and Prices

FY19 - Annual Maintenance

FFP

Contractor shall provide annual maintenance on the items listed in the associated SubCLINS IAW the Performance Work Statement (PWS).

PURCHASE REQUEST NUMBER: N0018320RCSU103

NET AMT

0001AA

GERMICIDAL GAS STERILIZER

Manufacturer: Advanced Sterilization Products S/N: 0033101336

ECN: 107776

Customer: Main OR NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

MILSTRIP: N0018320RCSU103

PSC CD: J065

NET AMT

0001AB

CHEMICAL STERILIZER UNIT

Manufacturer: Advanced Sterilization Products S/N: 1033150448

ECN: 125628

Customer: Main OR NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

MILSTRIP: N0018320RCSU103

NET AMT

0001AC

CHEMICAL STERILIZER UNIT

Manufacturer: Advanced Sterilization Products S/N: 1033150471

ECN: 125627

Customer: Main OR NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

MILSTRIP: N0018320RCSU103

NET AMT

0001AD

GERMICIDAL GAS STERILIZER

Manufacturer: Advanced Sterilization Products S/N: 1041100150

ECN: 107775

Customer: Main OR NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

MILSTRIP: N0018320RCSU103

NET AMT

0001AE

GERMICIDAL GAS STERILIZER

Manufacturer: Advanced Sterilization Products S/N: 104110055

ECN: 120910

Customer: Main OR NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

MILSTRIP: N0018320RCSU103

NET AMT

0001AF

GERMICIDAL GAS STERILIZER

Manufacturer: Advanced Sterilization Products S/N: 1041160212

ECN: 128421

Customer: Main OR NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

MILSTRIP: N0018320RCSU103

NET AMT

0001AG

GERMICIDAL GAS STERILIZER

Manufacturer: Advanced Sterilization Products S/N: 1041160213

ECN: 128422

Customer: Main OR NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

MILSTRIP: N0018320RCSU103

NET AMT

0001AH

CHEMICAL STERILIZER UNIT

Manufacturer: Advanced Sterilization Products S/N: 5041120044

ECN: 116065

Customer: Urology NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

MILSTRIP: N0018320RCUR101

PURCHASE REQUEST NUMBER: N0018320RCUR101

NET AMT

0001AJ

CHEMICAL STERILIZER UNIT

Manufacturer: Advanced Sterilization Products S/N: 5041120045

ECN: 116066

Customer: Urology NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

MILSTRIP: N0018320RCUR101

NET AMT

0001AK

CHEMICAL STERILIZER UNIT

Manufacturer: Advanced Sterilization Products S/N: 5041120038

ECN: 116064

Customer: Urology NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

MILSTRIP: N0018320RCUR101

NET AMT

0001AL

WASHER/DECONTAMINATION UNIT

Manufacturer: Ethicon Endo-Surgery Inc.

S/N: 5041160204

ECN: 129850

Customer: Otolaryngology O/P NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

MILSTRIP: N0018320RCXC102

PURCHASE REQUEST NUMBER: N0018320RCXC102

NET AMT

0001AM

WASHER/DECONTAMINATION UNIT

Manufacturer: Ethicon Endo-Surgery Inc.

S/N: 5041160151

ECN: 129851

Customer: Otolaryngology O/P NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

MILSTRIP: N0018320RCXC102

PURCHASE REQUEST NUMBER: N0018320RCXC102

NET AMT

0001AN

WASHER/DECONTAMINATION UNIT

Manufacturer: Ethicon Endo-Surgery Inc.

S/N: 5041160385

ECN: 129852

Customer: General Surgery O/P NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

MILSTRIP: N0018320RCGS101

PURCHASE REQUEST NUMBER: N0018320RCGS101

NET AMT

0001AP

GERMICIDAL GAS STERILIZER

Manufacturer: Advanced Sterilization Products S/N: 1041140038

ECN: 120907

Customer: Ambulatory Surgery Center NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

MILSTRIP: N0018320RC9E101

PURCHASE REQUEST NUMBER: N0018320RC9E101

NET AMT

0001AQ

WASHER/DECONTAMINATION UNIT

Manufacturer: Ethicon Endo-Surgery Inc.

S/N: 5041160205

ECN: 129854

Customer: Pediatric Subspecialty NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

MILSTRIP: N0018320RCKS001

PURCHASE REQUEST NUMBER: N0018320RCKS001

NET AMT

0001AR

WASHER/DECONTAMINATION UNIT

Manufacturer: Ethicon Endo-Surgery Inc.

S/N: 5041160384

ECN: 129853

Customer: Pulmonary Clinic NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

MILSTRIP: N0018320RCPU002

PURCHASE REQUEST NUMBER: N0018320RCPU002

NET AMT

Section C - Descriptions and Specifications

PERFORMANCE WORK STATEMENT

This contract shall provide full maintenance services for the listed equipment to include any accessories. This contract shall provide for on-site corrective repairs and preventive maintenance from Monday through Friday between the hours of 0700-1900. It shall include systems, system components, and their assembly parts (i.e.: contractor responsible for total maintenance of entire system). All maintenance provisions shall apply to hardware, firmware, and software, as appropriate, unless otherwise stated. Selected vendor must provide technical assistance through telephone support 24 hours a day, 7 days per week.

1. General

a. The Contractor shall comply with HIPAA and DoD Business Associate Agreement as applicable to the performance of this contract.

b. The Contractor shall be fully qualified / authorized by the Original Equipment Manufacturer (OEM) in the repair of all equipment listed within this contract. Contractor shall maintain current qualifications throughout entire contract period. Qualification includes but not limited to the certification of all repair persons and repair facilities by the OEM as being trained / qualified to perform required repairs.

2. Scope of Work

a. The Contractor shall provide trained, experienced, English speaking personnel, labor, tools, diagnostic equipment, software, test phantoms, material, supplies, transportation, parts and equipment necessary to perform Preventive Maintenance (PM), Calibration (CAL), Safety testing (ST) and corrective maintenance.

b. The Contractor shall provide telephonic communications with the Government to discuss technical matters relating to the performance of this contract. The Contractor will provide the name and phone number of a Government point of contact within 5 business days after receipt of award. A Contractor’s systems operator will be made available to answer technical questions regarding system operations and applications.

c. Equipment listed in this contract will be maintained to meet the original equipment manufacturers (OEM’s) specifications.

d. The Contractor Point of Contact (POC). The Contractor shall provide in writing the name and telephone number of a primary and alternate English-speaking individual to act as their representative for the scheduling and coordination of service calls, and to be responsible for the coordination of the contract with the Government. The contractor shall provide contact information within 5 business days after contract award. In the event a replacement is made, the contractor shall provide the replacement’s contact information within 5 business days.

3. Government furnished property, Materials and Services.

a. The Contractor representative(s) at each site is encouraged to request a pre-maintenance inspection prior to the award of the contract. As all apparent discrepancies must be identified upon submittal of quote, any and all claims must be received within 30 days of contract award or prior to contract start whichever occurs first. All non-apparent / hidden discrepancies, must be identified no later than the first scheduled preventative maintenance. Any claims resulting from hidden defects must be received within 30 days of first scheduled preventative maintenance. Any equipment found to be inoperable during this pre-maintenance inspection would be repaired using a separate purchase order. The cost of repairs shall not exceed contractor’s normal retail rate for required repairs. The government certifies that the equipment to be maintained under this contract will be in good operating condition on the effective date of this contract. For the purpose of this contract, the clause, “good operating condition” means the conditions necessary for the equipment to function as intended without corrective maintenance. The Contractor agrees to leave the equipment in good operating condition at the expiration of this contract. During the final week of this contract, the Government will make final inspection of the equipment. Any correction of deficiencies noted during this inspection shall be resolved prior to contract end. The Government reserves the right to request the repair (at no additional cost to the Government) of items identified with latten defects after contract termination, when it has been determined that defects either are a result of contractor’s performance or should have been discovered during normal performance of work under this contract.

b. The government will be responsible for maintaining the proper environment, including utilities and site requirements necessary for the system to function properly as specified by the OEM.

c. The Government will operate the system in accordance with the instruction manual provided by the OEM.

d. The Government will not be responsible for the damage or loss due to fire, theft, accident, or other disaster of Contractor supplies, materials, or for the personal belongings brought onto Government property by Contractor’s personnel.

4. Contractor Furnished Property and Material.

a. The Contractor shall provide all service literature, reference publications, laptop computers and diagnostic software to be used by the contractor service technicians and as required for the completion of the services in accordance with this contract.

5. Replacement Parts.

a. The Contractor shall have ready access to unique and/or high mortality replacement parts. All parts supplied shall be compatible with the existing system. In the event that replacements parts are required to be shipped. Shipping shall be performed with Next Day Air at no additional cost to the Government. If Next Day is not available, then contractor shall ship by the next fastest means.

b. The Contractor shall at their expense, replace all worn or defective parts necessary to restore the equipment to 100% operational condition as specified by the OEM.

c. Contractor installed replacement parts shall become the property of the Government and the replaced malfunctioning part shall become the property of the Contractor. Replaced items shall be properly disposed of at no additional cost to the Government (contractor to pay all “environmental fees” where required).

d. Freight, postage, and storage charges associated with shipment and receipt of replacement parts, and the return of parts shall be the responsibility of the Contractor.

e. All replacement parts shall be new and certified as OEM replacement parts. In the event that new parts are not available, the COR must approve the use of rebuilt parts and sub-assemblies prior to ordering and installing. Use of rebuilt parts are allowed provided that they are warranted to be free of defects for a period of time that meets or exceeds warranties of similar replacement parts. The contractor shall specifically annotate on the final Field Service Report the use and identification of rebuilt parts and the period of warranty. When discrepancies occur, the Government will make the final determination on whether a replacement part is of equal or better quality.

f. The Contractor must include software revisions and updates (field service changes), which are required due to FDA, or manufacturer announced safety-hazard recall, to include FDA Year 2000 Compliance Directive, as part of the contract at no additional cost to the Government. Updates shall be performed as soon as possible after release, but no later than the first scheduled Preventative Maintenance Inspection after release. For any updates that have been identified as critical, or required for the proper operation of equipment by the OEM, contractor shall provide installation within 30 days of release regardless of Preventative Maintenance Schedules.

Specific Tasks.

6. Contractor Report Requirements.

a. During normal duty hours, Contracted Field Service Engineer (FSE) personnel shall check-in with the Biomedical Engineering Division upon arrival at the Government site and again prior to departure. (Biomedical Engineering located in Build-250 1st floor; 757-953-5336). The Contractor FSEs shall personally notify Biomedical Engineering (BME) of problems that result in the equipment being left disabled upon their departure. After normal duty hours, Contractor FSE’s shall notify the duty Biomedical Engineer (BME) via cell phone 757-544-4506 to provide status of service performed, including PMs and corrective maintenance.

b. The Contractor shall provide to BME a full service report within two (2) days after completion of all service performed. The service report shall include, but not be limited to: contract number, equipment description (model, serial number, equipment control number) contractor’s log number, detailed description of the service(s) performed, replacement part(s) information (part number, part value, nomenclature, unit price, manufacturer, if not OEM, and whether the part is new/used/reconditioned), the completion date and time, man-hours expended and the hourly rate normally charged for the type of service performed, model and serial numbers, and the name of the FSE performing the service. In the event that agents / sub-contractor’s are used in the performance of repairs, said agent shall be identified on the service report by company name and contact information (i.e., telephone number). Additionally contractor will be required to affix a tag on equipment upon the completion of a preventative maintenance inspection. Tag may either be a “sticker” or “hanging tag”. As a minimum the tag shall contain: the name of the contractor, technician performing inspection and date of inspection legibly printed.

7. Contractor Responsibility.

a. The Contractor shall be responsible for the repair/replacement of damaged Government owned equipment and property due to the negligence of the Contractor or his representatives. All such replacement or repair shall be at the Contractor’s expense and shall be inspected to the satisfaction of the KO or appointed representative.

8. Preventive Maintenance Services.

a. In accordance with Naval Medical Logistics Command (NAVMEDLOGCOM) Risk Assessment Criteria, preventive maintenance shall be performed one (1) time per year in accordance with the Original Equipment Manufacturers (OEM) recommendations.

b. The preventive maintenance visits shall be performed during the following month: FEBRUARY each year.

The Contractor shall schedule and complete preventive maintenance services prior to the 15th of the selected month.

c. During each scheduled preventive maintenance visit performed during the Base and each Option Year, the Contractor shall replace the steam, water and exhaust manifolds, door gaskets and other worn or defective parts as required to complete the preventive maintenance.

d. All test equipment used in the performance of this contract must be calibrated (if required / as required by manufacture of test equipment) and shall be in compliance with Joint Commission on Accreditation of Healthcare Organizations (JCAHO), Original Equipment Manufacturer (OEM) and Federal Drug Administration (FDA) standards as required by Bureau of Medicine and Surgery (BUMED) Equipment Management Manual NAVMED P-5132 (CH-1, rev.1-2008).

9. Corrective Maintenance

a. Normal Working Hour Maintenance Coverage Maintenance Coverage will be Monday through Friday, between 8:00 A.M. to 4:30 P.M. A contractor Service Tech shall respond via telephone within 2 hours after receipt of trouble call, and provide on-site service no later than the close of business (4:30 pm) on the next business day. Equipment shall be operational within 48 hours.

b. Government request for corrective maintenance will be placed by BME, to the Contractor’s POC. Corrective Maintenance shall be completed during the hours specified in the contract.

c. The Contractor shall assign a unique Log/Reference Number to each Government request for Corrective Maintenance.

d. Contractor’s response to requests for service may include telephone consultation with the equipment user/operator and a Contractor FSE. Telephone consultation shall: 1) provide instruction in determining operator error; 2) determine the most likely cause of the problem; 3) determine if resolution of the problem requires the dispatch of a FSE; and 4) identify replacement parts likely to be required in order to return the equipment to 100% operational condition as specified by the OEM.

e. Contractor’s pricing shall be inclusive of all cost including parts, labor, travel and shipping.

f. The Contractor shall have his/her own service manuals, specifications, schematic diagrams, and parts lists to assist in the evaluation/repair of all equipment included in this contract.

10. Removal of Government Property

a. Whenever the repair of equipment cannot be performed at the Government site as determined by the Contractor, the Contractor shall notify BME who will make arrangements for the Contractor to remove the item to the Contractor’s designated site. The Contractor will be required to sign a Government form accepting responsibility for the Government equipment. The Contractor shall provide a detailed description and quantities of items to be removed. Description shall include manufacturer’s serial numbers and equipment control number (ECN). In the event that items / sub-assemblies / accessories are repaired via “Repair by Replacement” a detailed description of replaced items is to be included upon return of repaired components.

b. In the event that that contractor determines the equipment must be moved to an alternate location for repair, the Contractor is responsible for transporting the equipment to the alternate location and returning the repair equipment back to the Government site.

11. Equipment Modification Upgrades

a. The Contractor shall only incorporate OEM specified modifications, alterations and upgrades. Approval shall be obtained from BME COR prior to the Contractor installation of any modification, alteration, or upgrades.

b. The Contractor shall maintain contact with the OEM to determine the requirement for field modifications and to ensure accomplishment of these modifications in accordance with the time schedule set forth by the OEM.

c. The Government shall not alter the system without prior notification to the Contractor.

d. The contractor shall provide software updates to the Government. Installation of updates will be left to the discretion of the Government. All supplied software is to be warranted current and free of defects such as viruses.

12. Service Beyond the Scope of the Contract

a. The Contractor shall immediately, but not later than 24 consecutive hours after discovery, notify BME, in writing, of the existence or the development of any defects in, or repair required to the scheduled equipment, which the Contractor considers they are not responsible for under the terms of this contract. The Contractor shall state why this existence or development is not within scope.

Contractor Unclassified Access to Federally Controlled Facilities, Sensitive Information, Information Technology (IT) Systems or Protected Health Information (Jan 2017)

Homeland Security Presidential Directive (HSPD)-12, requires government agencies to develop and implement Federal security standards for Federal employees and contractors. The Deputy Secretary of Defense Directive-Type Memorandum (DTM) 08-006 – “DoD Implementation of Homeland Security Presidential Directive – 12 (HSPD-12)” dated November 26, 2008 (or its subsequent DoD instruction) directs implementation of HSPD-12. This clause is in accordance with HSPD-12 and its implementing directives.

APPLICABILITY

This text applies to contractor employees requiring physical access to any area of a federally controlled base, facility or activity and/or requiring access to a DoN or DoD computer/network/system to perform certain unclassified sensitive duties. This clause also applies to contractor employees who access Privacy Act and Protected Health Information, provide support associated with fiduciary duties, or perform duties that have been identified as National Security Position, as advised by the command security manager. It is the responsibility of the responsible security officer of the command/facility where the work is performed to ensure compliance.

Each contractor employee providing services at a Navy Command under this contract is required to obtain a Department of Defense Common Access Card (DoD CAC). Additionally, depending on the level of computer/network access, the contract employee will require a successful investigation as detailed below.

ACCESS TO FEDERAL FACILITIES

Per HSPD-12 and implementing guidance, all contractor employees working at a federally controlled base, facility or activity under this clause will require a DoD CAC. When access to a base, facility or activity is required contractor employees shall in-process with the Command’s Security Manager upon arrival to the Command and shall out-process prior to their departure at the completion of the individual’s performance under the contract.

ACCESS TO DOD IT SYSTEMS

In accordance with SECNAV M-5510.30, contractor employees who require access to DoN or DoD networks are categorized as IT-I, IT-II, or IT-III. The IT-II level, defined in detail in SECNAV M-5510.30, includes positions which require access to information protected under the Privacy Act, to include Protected Health Information (PHI). All contractor employees under this contract who require access to Privacy Act protected information are therefore categorized no lower than IT-II. IT Levels are determined by the requiring activity’s Command Information Assurance Manager.

Contractor employees requiring privileged or IT-I level access, (when specified by the terms of the contract) require a Single Scope Background Investigation (SSBI) or T5 or T5R equivalent investigation , which is a higher level investigation than the National Agency Check with Law and Credit (NACLC)/T3/T3R described below. Due to the privileged system access, an investigation suitable for High Risk national security positions is required. Individuals who have access to system control, monitoring, or administration functions (e.g. system administrator, database administrator) require training and certification to Information Assurance Technical Level 1, and must be trained and certified on the Operating System or Computing Environment they are required to maintain.

Access to sensitive IT systems is contingent upon a favorably adjudicated background investigation. When access to IT systems is required for performance of the contractor employee’s duties, such employees shall in-process with the Navy Command’s Security Manager and Information Assurance Manager upon arrival to the Navy command and shall out-process prior to their departure at the completion of the individual’s performance under the contract. Completion and approval of a System Authorization Access Request Navy (SAAR-N) form is required for all individuals accessing Navy Information Technology resources. The decision to authorize access to a government IT system/network is inherently governmental. The contractor supervisor is not authorized to sign the SAAR-N; therefore, the government employee with knowledge of the system/network access required or the COR shall sign the SAAR-N as the “supervisor”.

The SAAR-N shall be forwarded to the Command’s Security Manager at least 30 days prior to the individual’s start date. Failure to provide the required documentation at least 30 days prior to the individual’s start date may result in delaying the individual’s start date.

When required to maintain access to required IT systems or networks, the contractor shall ensure that all employees requiring access complete annual Information Assurance (IA) training, and maintain a current requisite background investigation. The Contractor’s Security Representative shall contact the Command Security Manager for guidance when reinvestigations are required.

INTERIM ACCESS

The Command's Security Manager may authorize issuance of a DoD CAC and interim access to a DoN or DoD unclassified computer/network upon a favorable review of the investigative questionnaire and advance favorable fingerprint results. When the results of the investigation are received and a favorable determination is not made, the contractor employee working on the contract under interim access will be denied access to the computer network and this denial will not relieve the contractor of his/her responsibility to perform.

DENIAL OR TERMINATION OF ACCESS

The potential consequences of any requirement under this clause including denial or termination of physical or system access in no way relieves the contractor from the requirement to execute performance under the contract within the timeframes specified in the contract. Contractors shall plan ahead in processing their employees and subcontractor employees. The contractor shall insert this clause in all subcontracts when the subcontractor is permitted to have unclassified access to a federally controlled facility, federally-controlled information system/network and/or to government information, meaning information not authorized for public release.

CONTRACTOR’S SECURITY REPRESENTATIVE

The contractor shall designate an employee to serve as the Contractor’s Security Representative. Within three work days after contract award, the contractor shall provide to the requiring activity’s Security Manager and the Contracting Officer, in writing, the name, title, address and phone number for the Contractor’s Security Representative. The Contractor’s Security Representative shall be the primary point of contact on any security matter. The Contractor’s Security Representative shall not be replaced or removed without prior notice to the Contracting Officer and Command Security Manager.

BACKGROUND INVESTIGATION REQUIREMENTS AND SECURITY APPROVAL PROCESS FOR CONTRACTORS ASSIGNED TO NATIONAL SECURITY POSITIONS OR PERFORMING SENSITIVE DUTIES

Navy security policy requires that all positions be given a sensitivity value based on level of risk factors to ensure appropriate protective measures are applied. Contractor employees under this contract are recognized as Non-Critical Sensitive [ADP/IT-II] positions when the contract scope of work require physical access to a federally controlled base, facility or activity and/or requiring access to a DoD computer/network, to perform unclassified sensitive duties. This designation is also applied to contractor employees who access Privacy Act and Protected Health Information (PHI), provide support associated with fiduciary duties, or perform duties that have been identified as National Security Positions. At a minimum, each contractor employee must be a US citizen and have a favorably completed NACLC or T3 or T3R equivalent investigation to obtain a favorable determination for assignment to a non-critical sensitive or IT-II position. The investigation consists of a standard NAC and a FBI fingerprint check plus law enforcement checks and credit check. Each contractor employee filling a non-critical sensitive or IT-II position is required to complete:

· SF-86 Questionnaire for National Security Positions (or equivalent OPM investigative product)

· Two FD-258 Applicant Fingerprint Cards (or an electronic fingerprint submission)

· Original Signed Release Statements

Failure to provide the required documentation at least 30 days prior to the individual’s start date shall result in delaying the individual’s start date. Background investigations shall be reinitiated as required to ensure investigations remain current (not older than 10 years) throughout the contract performance period. The Contractor’s Security Representative shall contact the Command Security Manager for guidance when reinvestigations are required.

Regardless of their duties or IT access requirements ALL contractor employees shall in-process with the Command’s Security Manager upon arrival to the command and shall out-process prior to their departure at the completion of the individual’s performance under the contract. Employees requiring IT access shall also check-in and check-out with the Navy Command’s Information Assurance Manager. Completion and approval of a System Authorization Access Request Navy (SAAR-N) form is required for all individuals accessing Navy Information Technology resources. The SAAR-N shall be forwarded to the Navy Command’s Security Manager at least 30 days prior to the individual’s start date. Failure to provide the required documentation at least 30 days prior to the individual’s start date shall result in delaying the individual’s start date.

The contractor shall ensure that each contract employee requiring access to IT systems or networks complete annual Information Assurance (IA) training, and maintain a current requisite background investigation. Contractor employees shall accurately complete the required investigative forms prior to submission to the Command Security Manager. The Command’s Security Manager will review the submitted documentation for completeness prior to submitting it to the Office of Personnel Management (OPM); Potential suitability or security issues identified may render the contractor employee ineligible for the assignment. An unfavorable determination is final (subject to SF-86 appeal procedures) and such a determination does not relieve the contractor from meeting any contractual obligation under the contract. The Command’s Security Manager will forward the required forms to OPM for processing. Once the investigation is complete, the results will be forwarded by OPM to the DoD Central Adjudication Facility (CAF) for a determination.

If the contractor employee already possesses a current favorably adjudicated investigation, the contractor shall submit a Visit Authorization Request (VAR) via the Joint Personnel Adjudication System (JPAS) or a hard copy VAR directly from the contractor’s Security Representative. Although the contractor will take JPAS “Owning” role over the contractor employee, the Command will take JPAS "Servicing" role over the contractor employee during the hiring process and for the duration of assignment under that contract. The contractor shall include the IT Position Category per SECNAV M-5510.30 for each employee designated on a VAR. The VAR requires annual renewal for the duration of the employee’s performance under the contract.

Section E - Inspection and Acceptance

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

Section F - Deliveries or Performance

DELIVERY INFORMATION

30-SEP-2020

BIOMEDICAL ENGINEERING

54 LEWIS MINOR STREET

BLDG. 250

PORTSMOUTH VA 23708-2297

757-953-5336 FOB: Destination N00183

30-SEP-2020

N00183

30-SEP-2020

N00183

30-SEP-2020

N00183

30-SEP-2020

N00183

30-SEP-2020

N00183

30-SEP-2020

N00183

30-SEP-2020

N00183

30-SEP-2020

N00183

30-SEP-2020

N00183

30-SEP-2020

N00183

30-SEP-2020

N00183

30-SEP-2020

N00183

30-SEP-2020

N00183

30-SEP-2020

N00183

30-SEP-2020

N00183

CLAUSES INCORPORATED BY REFERENCE

Section G - Contract Administration Data

CLAUSES INCORPORATED BY FULL TEXT

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (DEC 2018)

(a) Definitions. As used in this clause—

“Department of Defense Activity Address Code (DoDAAC)” is a six position code that uniquely identifies a unit, activity, or organization.

“Document type” means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

“Local processing office (LPO)” is the office responsible for payment certification when payment certification is done external to the entitlement system.

“Payment request” and “receiving report” are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall—

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/.

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) Document type. The Contractor shall submit payment requests using the following document type(s):

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items—

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

______Invoice 2-in-1 Service______________________________________________________

(Contracting Officer: Insert either “Invoice 2in1” or the applicable invoice and receiving report document type(s) for fixed price line items for services.)

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial item financing, submit a commercial item financing request.

(2) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF “combo” document type to create some combinations of invoice and receiving report in one step.]

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

(*Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert “See Schedule” or “Not applicable.”) (**Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)

(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity’s WAWF point of contact.

______USN.DETRICK.NAVMEDLOGCOMFTDMD.LIST.NMLC-WAWF@MAIL.MIL__________

(Contracting Officer: Insert applicable information or “Not applicable.”)

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of clause)

Section H - Special Contract Requirements

NMCARS 5237.102-90 Enterprise-wide Contractor Manpower Reporting Application (ECMRA)

The contractor shall report contractor labor hours (including subcontractor labor hours) required for performance of services provided under this contract for the Naval Medical Center Portsmouth via a secure data collection site. Contracted services excluded from reporting are based on Product Service Codes (PSCs). The excluded PSCs are:

(1) W, Lease/Rental of Equipment;

(2) X, Lease/Rental of Facilities;

(3) Y, Construction of Structures and Facilities;

(4) S, Utilities ONLY;

(5) V, Freight and Shipping ONLY.

The contractor is required to completely fill in all required data fields using the following web address https://doncmra.nmci.navy.mil.

Reporting inputs will be for the labor executed during the period of performance during each Government fiscal year (FY), which runs October 1 through September 30. While inputs may be reported any time during the FY, all data shall be reported no later than October 31 of each calendar year. Contractors may direct questions to the help desk, linked at https://doncmra.nmci.navy.mil.

(End of Text)

Base Access (NMCP)

Commander, Navy Installations Command (CNIC), has established the Navy Commercial Access Control System (NCACS), a standardized process for granting unescorted access privileges to vendors, contractors, suppliers and service providers not otherwise entitled to the issuance of a Common Access Card (CAC) who seek access to and can provide justification to enter Navy installations and facilities. Vendors visiting Naval Medical Center Portsmouth (NMCP) may obtain daily passes directly from Naval Station Norfolk (NSN) Pass and ID office, located at NSN (Bldg CD-9), 9040 Hampton Blvd, Norfolk, Virginia, 23505, by submitting identification credentials for verification and undergoing a criminal screening/ background check. Alternatively, if the vendor so chooses, it may voluntarily elect to obtain long-term credentials through enrollment, registration, background vetting, screening, issuance of credentials, and electronic validation of credentials at its own cost through one of the designated independent contractor NCACS service providers. Credentials will be issued every five years and access privileges will be reviewed / renewed on an annual basis. The costs incurred to obtain Navy installation access of any kind are not reimbursable, and the price(s) paid for obtaining long-term NCACS credentials will not be approved as a direct cost of this contract. Further information regarding NCACS can be found at http://cnic.navy.mil/CNIC_HQ_Site/index.htm.

PRIVACY AND SECURITY OF PROTECTED HEALTH INFORMATION

1. Introduction

In accordance with DoD 6025.18-R “Department of Defense Health Information Privacy Regulation,” January 24, 2003, the Contractor meets the definition of Business Associate. Therefore, a Business Associate Agreement is required to comply with both the Health Insurance Portability and Accountability Act (HIPAA) Privacy and Security regulations. This clause serves as that agreement whereby the Business Associate agrees to abide by all applicable HIPAA Privacy and Security requirements regarding health information as defined in this clause, and in DoD 6025.18-R and DoD 8580.02, as amended. Additional requirements will be addressed when implemented.

a. Definitions. As used in this clause generally refer to the Code of Federal Regulations (CFR) definition unless a more specific provision exists in DoD 6025.18-R or DoD 8580.02.

(1) HITECH Act shall mean the Health Information Technology for Economic and Clinical Health Act included in the American Recovery and Reinvestment Act of 2009.

(2) Individual has the same meaning as the term “individual” in 45 CFR 160.103 and shall include a person who qualifies as a personal representative in accordance with 45 CFR 164.502(g).

(3) Privacy Rule means the Standards for Privacy of Individually Identifiable Health Information at 45 CFR part 160 and part 164, subparts A and E.

(4) Protected Health Information has the same meaning as the term “protected health information” in 45 CFR 160.103, limited to the information created or received by the Business Associate from or on behalf of the Government pursuant to the Contract.

(5) Electronic Protected Health Information has the same meaning as the term “electronic protected health information” in 45 CFR 160.103.

(6) Required by Law has the same meaning as the term “required by law” in 45 CFR 164.103.

(7) Secretary means the Secretary of the Department of Health and Human Services or his/her designee.

(8) Security Incident will have the same meaning as the term “security incident” in 45 CFR 164.304, limited to the information created or received by Business Associate from or on behalf of Covered Entity.

(9) Security Rule means the Health Insurance Reform: Security Standards at 45 CFR part 160, 162 and part 164, subpart C.

(10) Terms used, but not otherwise defined, in this Clause shall have the same meaning as those terms in 45 CFR 160.103, 160.502, 164.103, 164.304, and 164.501.

b. The Business Associate shall not use or further disclose Protected Health…