0702-16_(SAP_18-061)_-_Switch_Matrix_-_SOW_Rev1.docx
DOCX document 19 KB Posted
- Attached to
- 8 X 8 Switch Matrix Federal contract opportunity
- Solicitation number
- N0017818Q0218
About this file
Statement of Work
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| 0702-16_N0017818Q0218_SF18.docx | DOCX document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
RF SWITCH MATRIX ENGINEERING (NRE) SUPPORT
STATEMENT OF WORK (SOW)
1.0 BACKGROUND
The Naval Surface Warfare Center Dahlgren Division Dam Neck Activity (NSWCDD DNA) has been tasked by the Naval Cyber Warfare Development Group, Suitland to procure hardware and software engineering technical support to provide system enhancements for the AN/USQ-149(V)2 CLUSTER SNOOP and AN/ULR-22(V)3 RUTHLESS RAVEN Carry On Equipment (COE) systems in order to resolve obsolescence and system integration issues. This Statement of Work (SOW) describes efforts for the procurement of the non-recurring engineering support to modify an existing control interface in model RCT0043 RF Switch Matrix/Up Converter unit to incorporate the legacy SA-118 RF Switch Matrix control capability to support the control and operation from existing COE systems and to include an Ethernet based control capability.
2.0 APPLICABLE DOCUMENTS
Original Equipment Manufacturer (OEM) Specifications
3.0 REQUIREMENTS
The Contractor shall provide support for the modification of the existing control interface of the RCT0043 RF Switch Matrix/Up Converter as follows:
| 3.1 | The Contractor shall add an additional interface to support the legacy SA-118 Switch Matrix controls. |
| 3.2 | The Contractor shall add an additional interface to support a 10/100 base-T Ethernet control interface for adding new technology using industry standard Ethernet communications. |
| 3.3 | The Contractor shall ensure the new design would be compatible with both the SA-118 Switch Controls and industry standard Ethernet communications. |
| 3.4 | The Contractor shall add an SA-118 connector and an Ethernet RJ-45 connector to the rear panel of the RCT0043 RF Switch Matrix/Up Converter. |
| 3.5 | The Contractor shall add a new circuit board to the RCT0043 RF Switch Matrix/Up Converter to buffer, decode, and multiplex the selected interface to the internal Switch Controls. |
| 3.6 | The Contractor shall maintain asynchronous control of the legacy SA-118 interface. |
| 3.7 | The Contractor shall fully test the assembled new control interface using an in-house test bed and acceptance test procedures to ensure full and proper operation. |
| 3.8 | The Contractor shall coordinate with the TPOC to receive the government furnished property and to complete all work under this SOW. |
| 3.9 | The Contractor shall ship the modified RCT0043 RF Switch Matrix/Up Converter interface control card, part number RPL0245, to the technical point of contract (TPOC) listed below after completion of all work. |
| 4.0 | DELIVERABLES |
The Contractor shall provide data in accordance with CDRL A001.
5.0 GOVERNMENT-FURNISHED PROPERTY/MATERIAL/INFORMATION (GFP/GFM/GFI)
The Government will provide a quantity of one (1) each RPU-100 Receiver Processor Unit, S/N 002 or equivalent, valued at approximately $100,000 for testing and validation, to be delivered at an agreed to time.
6.0 SECURITY
All work to be performed under this contract is unclassified.
7.0 TECHNICAL POINT OF CONTACT
Michael T. Haag
NSWCDD DNA/R11
1922 Regulus Avenue, Virginia Beach, VA 23461 Phone: (757-492-6097) Email: michael.t.haag@navy.mil
File details come from the government source that posted it.