ProtoLaser_3D_LDS_System__-_SOW.pdf

PROTOLASER 3D LASER DIRECT STRUCTURING (LDS) SYSTEM SUPPORT

STATEMENT OF WORK

1.0 BACKGROUND

The Naval Surface Warfare Center, Dahlgren Division (NSWCDD), Cyber Warfare Engineering Division A40, Cyber Research and

Engineering Branch (A41), System Security Engineering (SSE)

Laboratory Group designs Cyber Security solutions because many commercially available solutions do not adequately meet the security concerns of our sponsor Programs. The A41 SSE Lab

Group requires one (1) ProtoLaser 3D Laser Direct Structuring

(LDS) System. The intended use of the LPKF-LDS® system is to produce customized hardware prototypes which provide innovative

Cyber Security solutions for current and future Navy programs.

Specifically, the LPKF-LDS® system will enable the SSE Group to develop, design, and prototype 3-dimensional Molded Interconnect

Devices (MID). These devices and the technique use to create them could be used to create defensive Cyber sensors, enable retrofit of existing systems, provide repeatable manufacturing, provide integration of circuits and enclosures reducing the number of configuration items, provide more design flexibility, and reduce production time.

2.0 APPLICABLE DOCUMENTS

LPKF-LDS® System Specifications

3.0 REQUIREMENTS

3.1 The contractor shall provide one (1) ProtoLaser 3D LDS

System, manufactured by LPKF Laser & Electronics, as follows:

Item Number Description Quantity

10032807

ProtoLaser 3D Laser structuring system for

LDS based molded interconnect devices

(MID). Laser wavelength 1070 nm (IR), max.

laser power 5W, Spot size 50 um, laser frequency 10-200 kHz, max. scan area

(x/y/z) 4” x 4” x 1”, max. part size 12” x

12” x 2”. Includes vision system, CircuitPro 3D software and control PC

(mouse, keyboard and monitor not included).

124391 Vacuum: Dust extraction unit for ProtoLaser

S/U/U3/3D/ML1100, 1800, 2000, D104.

10029743

LPKF ProtoPaint - 2-component LDS lacquer to coat plastic components that are manufactured from non-LDS-grade resin (e.g.

3D printed prototypes). Includes 6 aerosol spray cans 200ml each with LPKF ProtoPaint and 20 Ultradur B4520 test plaques.

10029184

LPKF ProtoPlate LDS laboratory system

(110V) for currentless metalization of laser activated LDS plastic material and laser activated LPKF ProtoPaint

10018379

LPKF ProtoPlate Chemistry - 9 sets electroless Cu plating chemicals for LPKF

ProtoPlate system. For laboratory use only.

3.2 The contactor shall ensure all items are packaged safely

and shipped to the Technical Point of Contact (TPOC) listed in section 5.0 at NSWCDD located in Dahlgren, Virginia.

3.3 The contractor shall provide installation of the system

once inspection and acceptance by the Government is complete;

3.4 The contractor shall provide training on the system for up to eight (8) Government personnel onsite at the NSWCDD once installation is complete.

3.5 The contractor shall coordinate with the TPOC to schedule the installation of the new LPKF-LDS® system and the on-site training.

4.0 GOVERNMENT FURNISHED INFORMATION

4.1 The government will coordinate with the contractor on the date and time for installation once the LPKF-LDS® system is delivered and accepted by the government.

4.2 The government will provide access to the installation and location for the work to be performed.

5.0 TECHNICAL POINT OF CONTACT

Beth Peed

A41/NSWCDD

Building 1450

Phone: (540) 653-1842

Email: elizabeth.peed@navy.mil mailto:elizabeth.peed@navy.mil