SOW Oscilliscope v1.pdf

COMMERCIAL OSCILLISCOPE/TEST EQUIPTMENT

STATEMENT OF WORK

1.0 General

1.1 Introduction

The Naval Surface Warfare Center, Indian Head Division (NSWC IHD) is the Department of

Defense (DoD) Energetics Center and serves as the DoD Explosive Ordnance Disposal

Technology Program lead.

NSWC IHD provides research, development, engineering, manufacturing, test, evaluation and in-service support of energetics and energetic materials (chemicals, propellants and explosives) for ordnance, warheads, propulsion systems, pyrotechnic devices, fuzing, electronic devices, Cartridge Actuated Devices and Propellant Actuated Devices (CAD/PADs), Packaging, Handling, Storage, and Transportation (PHS&T), gun systems and special weapons for Navy, Joint Forces, and the Nation.

The NSWC IHD requires the purchase a set of the following Oscilloscopes and test equipment to support operations.

1.1.1 One (1) 4-Series Mixed Signal Oscilloscope (part# MSO44)

1.1.2 One (1) 3-Series Mixed Domain Oscilloscope (Part# MDO34)

1.2 Scope of Work

The Contractor shall be responsible for the delivery of Oscilloscopes /Test Equipment to support testing.

2.0 Applicable Document

2.1 Conflicting Document Requirements

If there are any conflicts between specifications, drawings, or requirements listed herein, the contractor shall notify the Contracting Officer (KO) and the Technical Point of Contact (TPOC), in writing for interpretation, clarification, and resolution.

3.0 Requirements

3.1 Oscilloscope Specifications

3.1.1 General

The equipment shall be equipped with multiple channels for any device lacking an integrated visual display within the unit.

Any unit that does come with a visual display must have 4 channels.

3.1.2 Sample Rates and resolution

Any device that does not have a visual display must have capability of reading up to 24 volts DC or 120 volts AC, by means of filters or different probe configurations.

Any equipment with a visual display must have a sampling rate of at least 1 GHz and up to 24 volts DC or 120 volts AC, by means of filters or different probe configurations.

3.1.2 Hazard Classification

Test equipment will not require any specifications associated with Class I, Division 1 or Class II, Division 1 environments or lower.

3.2 Inspection

The Government shall perform a visual inspection to ensure the deliverables are free of damage, or any obvious defects. Inspection shall be completed within 15 working days of receipt of all deliverables. Contractor invoicing may occur as many as 30 working days after acceptance of deliverables.

The Government shall alert the Contractor to any nonconforming deliverables within one (1) working day of identifying the nonconformity. The Contractor shall respond to with their recommended disposition on the deliverables within one (1) working day.

3.3 Warranty

All electronics shall be protected by at least a 1-year manufacturer’s warranty. The warranty shall be void if any unapproved alterations have been made to the equipment.

4.0 Deliverables

The Technical Point of Contact and Contracting Officer (KO) for this contract will approve all deliverables as specified herein.

4.1 Hardware Delivery

The Contractor shall notify the Contracting Officer 60 days in advance if the Contractor cannot meet the contract delivery schedule.

The Contractor shall be responsible for coordinating and shipping all the units below to the required destination. The packing shall prevent any damage which may occur during transit.

Table 1: Procurement Quantities

Item Year Part Number Nomenclature Qty UOI

1 Base MSO44

4 Series Mixed Signal Oscilloscope;

(4) FlexChannels with

31.25M record length, 3−year warranty, Certificate of Traceable

Calibration Standard, (Bandwidth option required)

1 EA

1.1 Base 4−PWR−BAS Basic power measurements and

analysis

1 EA

1.2 Base MSO44 4−BW−200 200 MHz Bandwidth 1 EA

2 Base THDP0200 Differential PROBE; 200 MHZ

TekVPI DIFFERENTIAL HIGH

VOLTAGE PROBE

1 EA

3 Base TCP0030A Probe, AC/DC Current; 30 Amp DC, DC TO 120 MHZ; with

TekVPI Interface; Certificate of

Traceable Calibration Standard

1 EA

4 Base 4−PRO−SERIAL−PER License; Software Bundle; Pro Serial

Decode Bundle for 4

Series MSO; Perpetual License; Node

Locked

1 Base MDO34 3−Series Mixed Domain

Oscilloscope; (4) Analog Channels, 3− year warranty, Certificate of

Traceable Calibration Standard

1 EA

2 Base 3−SA1 Spectrum analyzer input frequency range from 9 kHz to 1 GHz and capture bandwidth to 1 GHz

1 EA

2.1 Base MDO34 3−BW−200 200 MHz Bandwidth for analog

channels

1 EA

2.2 Base 3−PWR Power measurement and analysis 1 EA

2.3 Base 3−SRCOMP Computer serial triggering and

analysis (RS−232/422/485/UART)

1 EA

2.4 Base 3−SREMBD Embedded serial triggering and

analysis (I2C, SPI)

1 EA

3 Base THDP0200 Differential PROBE; 200 MHZ

TekVPI DIFFERENTIAL HIGH

VOLTAGE PROBE

1 EA

4 Base TCP0030A Probe, AC/DC Current; 30 Amp DC, DC TO 120 MHZ; with

TekVPI Interface; Certificate of

Traceable Calibration Standard

Delivery address provided below:

Trevor Muhler

Naval Surface Warfare Center Indian Head Division

4522 McMahon Road

Bldg. 116, Suite 100

Indian Head, MD 20640