8593648E-form 16.docx
DOCX document 30 KB Posted
- Attached to
- CKU-8 HARDWARE Federal contract opportunity
- Solicitation number
- N00174-16-T-0059
About this file
Not Listed
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| 8593648 REV E Block.pdf | ||
| 8593693 REV F TUBE TELESCOPING.pdf | ||
| 8593642 REV E RING STOP.pdf | ||
| 8593695F-form16.doc | DOC document | |
| 8593689F-form16.doc | DOC document | |
| N00174-16-T-0059.docx | DOCX document | |
| 8593693F-form16.doc | DOC document | |
| 8593642E-form16.doc | DOC document | |
| 8593699 REV D CAP.pdf | ||
| 8593700 REV C TRUNNION.pdf | ||
| 8593656 REV E Plug.pdf | ||
| Form 36 Drawing SpecificationsREV1-16T0059.pdf | ||
| 8593699D-form16.doc | DOC document | |
| 8593657F-form16.doc | DOC document | |
| 8593695 REV F TUBE INSIDE.pdf | ||
| 8593656E-form 16.docx | DOCX document | |
| 8593644D-form 16.docx | DOCX document | |
| 8593657 REV F PIN FIRING.pdf | ||
| 8593644 REV D Latch.pdf | ||
| 8593689 REV F TUBE OUTSIDE.pdf | ||
| 8593700C-form16.doc | DOC document |
Show all 21
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PROCUREMENT DEPARTMENT FORM 16
Revised 8/28/08 Page 1 of 2
QUALITY ASSURANCE REQUIREMENTS
Note: This form as completed by the customer shall be incorporated into the solicitation/contractual award document.
Inspection:
[ ] Inspection and Acceptance at Source
[X] Inspection and Acceptance at Destination
[ ] Initial Inspection at Source with Final Inspection and Acceptance at Destination
| [X] Inspection Timeframe: |
| 45 |
| days. |
Certifications:
Certifications are required for the following:
| One Copy of these certs must accompany the parts upon delivery. The Container holding these documents must be legibly marked as such. |
| One Copy of these certs must be forwarded to: |
Lashawn Bowman Fax 301 744 4828
Part Name: Block Part Number: 8593648 Revision: E Certificate of Analysis
Certificate of Compliance
Material: In accordance with drawing notes 2,3, or 4
X
Hardness Test:
Hydro Test:
Heat Treat:
Welding:
Magnetic Particle Inspection:
Ultrasonic Inspection:
Radiographic Inspection:
Dye Penetrant Inspection:
Plating: Anodize per note 6
X
Protective Finish:
Other
Attachment ( ) Procurement Department Form 16 Revised 8/28/08 Page 2 of 2
| Note: Customer is to select the Special Clause(s) below as applicable. The selected clause(s) |
| shall be incorporated into the solicitation/contractual award document. |
Special Clauses:
[ ] IHD 45 – SAMPLING OF RECEIVED MATERIAL – ORDNANCE MATERIAL AND ORDNANCE COMPONENTS (NAVSEA/IHD) FEB 2000
| a. |
| When the Indian Head Division, Naval Sea Systems Command, Indian Head, Maryland, receipt inspects Ordnance material or Ordnance components under this contract for Naval rockets or missiles, the following sampling procedures will be used: |
MIL-STD-1916
Level V for Critical Dimensions
Level II N<200 Level III N>200 for majors
Level I N<100 Level II N>100 for minors
| b. |
| In all cases, the acceptance number will be zero (0), the entire lot will be rejected for any defect. |
| c. |
| Notwithstanding the above, the Indian Head Division, Naval Sea Systems Command, Indian Head, Maryland, may at its discretion, accept a defect on a waiver on a case-by-case basis. |
[X ] IHD 46 – SAMPLING OF RECEIVED MATERIAL – MANRATED MATERIAL (NAVSEA/IHD) FEB 2000
| a. |
| When the Indian Head Division, Naval Sea Systems Command, Indian Head, Maryland, receipt inspects man-rated material under this contract for rockets, catapults, cartridge actuated devices and their components, the following sampling procedures will be used: |
MIL-STD-1916
Level VI for Critical Dimensions
Level II N<200 Level III N >200 for majors
Level I N<100 Level II N>100 for minors
| b. |
| In all cases, the acceptance number will be zero (0), the entire lot will be rejected for any defect. |
| c. |
| Notwithstanding the above, the Indian Head Division, Naval Sea Systems Command, Indian Head, Maryland, may at its discretion, accept a defect on a waiver on a case-by-case basis |
Attachment ( )
File details come from the government source that posted it. Updated .