Attachment1.Specifications.pdf

Solicitation Number: N00173-19-Q-AL01 Attachment 1

ATTACHMENT 1

Critical Specifications

1. Ka-band Synthesized Frequency Up-converter (no inversion)

Interface Requirements:

Input Interface Specification: SMA (50 ohms) Input Frequency: 70±18 MHz Return Loss: 26 dB {min} No Damage Power: +15 dBm {min} Output Interface Specification: 2.92mm (50 ohms) Output Frequency: 30-31 GHz in 1 kHz steps Return Loss: 20 dB {min} LO Leakage: -75 dB {min} P1dB: +15 dBm {min} Ext. Frequency Ref. (10 MHz) drives Ultra-low Phase Noise Int. Ref.

Phase Noise: 1.8 ° RMS

Transfer Requirements:

Gain: 30-35 dB Gain Slope: 0.03 dB/MHz {max} Gain Adjustment: 30 dB in 0.2 dB steps AM/PM Conversion: 0.03 °/MHz {max @ 0 dBm} Noise Figure: 18 dB {max} Image Rejection: 80 dB {min} Amplitude Response:

±0.02 dB Group Delay:

Linear: 0.03 ns/MHz {max} Parabolic 0.01 ns/MHz² {max} Ripple 1 ns(p-p) {max} Spurious Outputs:

Signal Related: -60 dBc {min} Signal Independent: -70 dBc {min} IMD (IP3) [Two Signals @ 0 dBm]: 50 dBc (+25 dBm IP3 pt.)

Remote Ethernet Interface: HTTP/Web-server, SNMP 1.0 config, Telnet Access Noise Power Density: -124 dB/Hz {max}

2. Ka-band Synthesized Frequency Down-converter (no inversion)

Input Interface Specification: 2.92mm (50 ohms) Input Frequency: 30-31 GHz in 1 kHz steps Return Loss: 17 dB {min} LO Leakage: -80 dB {min} P1dB: +15 dBm {min} Output Interface Specification: SMA (50 ohms) Output Frequency: 70±18 MHz Return Loss: 26 dB {min} No Damage Power: +15 dBm {min}

Gain: 43-48 dB Gain Slope: 0.03 dB/MHz {max} Gain Adjustment: 30 dB in 0.2 dB steps AM/PM Conversion: 0.03 °/MHz {max @ 0 dBm} Noise Figure: 18 dB {max} Image Rejection: 80 dB {min} Amplitude Response:

±0.02 dB Group Delay:

Linear: 0.03 ns/MHz {max} Parabolic 0.01 ns/MHz² {max} Ripple 1 ns(p-p) {max} Spurious Outputs:

Signal Related: -60 dBc {min} Signal Independent: -75 dBc {min} IMD (IP3) [Two Signals @ 0 dBm]: 60 dBc (+30 dBm IP3 pt.)

Phase Noise Requirement Reference Performance Calculation (1.8 ° RMS):

Carrier Frequency 3.10E+10 Hz Ref. Frequency 1.00E+07

Offset (Hz) 10 100 1000 10000 100000 300000 1000000 2000000 L(f) in dBc -56.0 -71.0 -84.0 -86.0 -91.0 -91.0 -113.0 -113.0 Change/decade -15.0 -13.0 -2.0 -5.0 0.0 -42.1 0.0 N/A Partial Result 0.432456 0.417654 1667.131 432.4555 200000 8.2579E-19 1000000 Contribution 3.44E-05 1.32E-05 2.64E-05 0.000109 0.0001589 7.2732E-05 5.012E-06

1.659 deg RMS Jitter = 148.7 fs RMS

3. Ka-band Synthesized Frequency Up-converter (no inversion)

Input Interface Specification: SMA (50 ohms) Input Frequency: 70±18 MHz Return Loss: 26 dB {min} No Damage Power: +15 dBm {min} Output Interface Specification: 2.92mm (50 ohms) Output Frequency: 35750-36250 MHz in 1 kHz steps Return Loss: 14 dB {min} LO Leakage: -75 dB {min} P1dB: -5 dBm {min}

Gain: 25-30 dB Gain Slope: 0.03 dB/MHz {max} Gain Adjustment: 30 dB in 0.2 dB steps AM/PM Conversion: 0.03 °/MHz {max @ 0 dBm} Noise Figure: 25 dB {max} Image Rejection: 80 dB {min} Amplitude Response:

±0.02 dB Group Delay:

Linear: 0.03 ns/MHz {max} Parabolic 0.01 ns/MHz² {max} Ripple 1 ns(p-p) {max} Spurious Outputs:

Signal Related: -60 dBc {min} Signal Independent: -65 dBc {min} IMD (IP3) [Two Signals @ 0 dBm]: 50 dBc (+25 dBm IP3 pt.)

Noise Power Density: -124 dB/Hz {max}

4. Ka-band Synthesized Frequency Down-converter (no inversion)

Interface Requirements:

Input Interface Specification: 2.92mm (50 ohms) Input Frequency: 35750-36250 MHz in 1 kHz steps Return Loss: 14 dB {min} LO Leakage: -80 dB {min} P1dB: +10 dBm {min} Output Interface Specification: SMA (50 ohms) Output Frequency: 70±18 MHz Return Loss: 26 dB {min} No Damage Power: +15 dBm {min}

Gain: 43-48 dB Gain Slope: 0.03 dB/MHz {max} Gain Adjustment: 30 dB in 0.2 dB steps AM/PM Conversion: 0.03 °/MHz {max @ 0 dBm} Noise Figure: 16 dB {max} Image Rejection: 80 dB {min} Amplitude Response:

±0.02 dB Group Delay:

Linear: 0.03 ns/MHz {max} Parabolic 0.01 ns/MHz² {max} Ripple 1 ns(p-p) {max} Spurious Outputs:

Signal Related: -60 dBc {min} Signal Independent: -65 dBc {min} IMD (IP3) [Two Signals @ 0 dBm]: 60 dBc (+30 dBm IP3 pt.)

Phase Noise Requirement Reference Performance Calculation (1.8 ° RMS):

Carrier Frequency 3.60E+10 Hz Ref. Frequency 1.00E+07

Offset (Hz) 10 50 100 1000 10000 300000 1000000 2000000 L(f) in dBc -43.0 -68.0 -85.0 -88.0 -90.0 -96.0 -115.0 -115.0 Change/decade -35.8 -56.5 -3.0 -2.0 -4.1 -36.3 0.0 N/A Partial Result 0.001012 2.63E-09 143.9624 1667.131 2611.3431 1.3663E-15 1000000 Contribution 0.000191 1.64E-06 1.81E-06 1.05E-05 0.0001101 2.7411E-05 3.162E-06

1.507 deg RMS Jitter = 116.3 fs RMS