18Q0197Specs.docx

Upconverter Specs

2 REQUIREMENTS

2.1 Reference Electrical Requirements

2.1.1 Frequency: 10 MHz

2.1.2 Input Level: -5 to +5 dBm

2.1.3 Input VSWR: 1.4:1

2.1.4 Input Impedance: 50Ω

2.1.5 Phase Noise: <-120 dBc/Hz @ 10 Hz Offset, max <-140 dBc/Hz @ 100 Hz Offset, max <-150 dBc/Hz @ 1 KHz Offset, max <-155 dBc/Hz @ 10 KHz Offset, max 2.1.6 Input: Muxed with L-Band, or separate input.

2.1.7 Insertion Loss: J1 – J2, 1.0 dB, (10 MHz reference)

2.2 IF Input Electrical Specifications

2.2.1 Frequency: 950-1950 MHz

2.2.2 Input (No Damage): +10 dBm

2.2.3 Input Impedance: 50Ω

2.2.4 Input VSWR: 1.5:1

2.3 RF Output Electrical Requirements

2.3.1 Frequency: 26.00 to 27.00 GHz

2.3.2 Output Power, P1dB: 0 dBm, min

2.3.3 Output Impedance: 50Ω

2.3.4 Output VSWR: 1.8:1 max

2.3.5 Spurious (In-Band): -60 dBc, max (signal at -20 dBm out)

2.3.6 Two Tone IMD: -55 dBc (-20 dBm/Tone output, 20 MHz Apart, 0 dB Gain)

2.3.7 LO Frequency: 25.05 GHz

2.3.8 LO Leakage: -85 dBm, max

2.3.9 Image Level [LO-IF]: -60 dBc, max

2.3.10 Second Harmonics LO+2IF: -60 dBc (-20dBm output)

2.3.11 Phase Noise:

OFFSET TYP (dBc/Hz) MAX (dBc/Hz) 10 Hz -33 -32 100 Hz -63 -62 1 KHz -82 -77 10 KHz -92 -87 100 KHz -100 -97 1 MHz -120 -113 ≥10 MHz -130 -123 The max values indicate performance over temperature and variation in reference input power. Unit to meet continuous phase noise mask as described by the MAX points.

2.3.12 Output Noise Power Density: -145 dBm/Hz, MAX

2.4 Gain Specifications

2.4.1 Conversion Gain: +0 dB ±2 dB

2.4.2 Gain Adjust Range: NA

2.4.3 Gain Flatness, per 40 MHz: ±0.25 dB, MAX (-15 dBm Input, 0 dB Gain)

2.4.4 Gain Flatness, Full band: ±.75 dB, MAX (-15 dBm Input, 0 dB Gain)

2.4.5 Gain Variation vs. Temp: ±1.5 dB (-20˚C to +70˚C)

2.4.6 Gain Variation, Constant Temp: ±0.25 dB/24 Hrs.

3 I/O SPECIFICATIONS

3.1 Lock Detect: +5V Logic

3.2 Gain Adjust: NA

3.3 Supply Voltage: +8 VDC, ±0.5V

3.4 Current: 775 mA TYP, 850 mA MAX

4 MECHANICAL SPECIFICATIONS

4.1 Overall Dimensions: 2.5” x 3.5” x 0.6” (BUC) 0.52” x 1.63” x .32” (Filter)

4.2 Housing: Aluminum Alloy

4.4 Finish: Electroless Nickel

4.5 Connectors RF Input: Female SMA RF output: Female 2.92 mm DC: Filtered Feed-Thru Lock Detect: Filtered Feed-Thru GND: Ground Lug

5 ENVIRONMENTAL SPECIFICATIONS

5.1 Operating Temperature Range: -30°C to +80°C, Case

5.2 Storage Temperature Range: -50°C to +105°C

5.2.1 Altitude: 16,000 feet

5.2.2 Humidity: 0 to 95% non-condensing

5.2.3 Vibration (Survival): 5 G’s RMS, 10 to 2000 Hz

5.2.4 Mechanical Shock (Survival): 15 g/15 ms (half sine wave