Amplifier_Requirement.pdf

PDF 69 KB Posted

Attached to
Intent to Sole Source an award for 10 each Empower Module Assemblies/Amplifiers Federal contract opportunity
Solicitation number
N00173-17-EB04
Issued by
Department of the Navy Secretary of the Navy Office of Naval Research

About this file

From the source

Solid State Broadband High Power Amplifier Specification for model numbers 1193-BBM2E4AKO and 1191-BBM5K8CKT

View the file

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Amplifier Requirement

LINE ITEM 1:

Electrical Specifications

Operating frequency: 20 to 1000 MHz Peak Output Power: 100 Watt minimum Gain, Small signal: 50 dB min Operating Voltage: 28 Volt typical Current consumption: 15 Amp max

Environmental Specifications

Operating Case Temperature: -40 to +85 Celsius Altitude : 30,000 feet

(MIL-STD-810F Method 500.4) Vibration/Shock: Airborne (MIL-STD-810F Method 514.5/516.5-Proc 1)

Mechanical Specifications:

Dimensions 7.0 x 4.0 x 1.2 inch RF connectors Input: Type-SMA, Female Output: Type-SMA, Female DC Interface Connector Hybrid – D-SUB 17-PIN, Male (17W2) Cooling External Heatsink Required

Note: DC INTERFACE connector has to have identical pin definition as defined in EMPOWER 1193 specification sheet. The device has to support the RS-485 serial communication protocol. Device must have identical mechanical dimensions and mounting holes as referenced EMPOWER 1193.

LINE ITEM 2:

Electrical Specifications

Operating frequency: 2500 to 6000 MHz Peak Output Power: 100 Watt minimum Gain, Small signal: 55 dB min Operating Voltage: 28 Volt typical Current consumption: 22 Amp max

Environmental Specifications

Operating Case Temperature: -40 to +85 Celsius Altitude : 30,000 feet

(MIL-STD-810F Method 500.4) Vibration/Shock: Airborne (MIL-STD-810F Method 514.5/516.5-Proc 1)

Mechanical Specifications:

Dimensions 8.0 x 6.5 x 1.0 inch RF connectors Input: Type-SMA, Female Output: Type-TNC, Female DC Interface Connector Hybrid – D-SUB 17-PIN, Male (17W2) Cooling External Heatsink Required

Note: DC INTERFACE connector has to have identical pin definition as defined in EMPOWER 1191 specification sheet. The device has to support the RS-485 serial communication protocol. Device must have identical mechanical dimensions and mounting holes as referenced EMPOWER 1191.

File details come from the government source that posted it. Updated .