21Q0136_sol_0001.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The reason for this amendment is to extend the closing date to June 16, 2021, update information w ithin the Statement of Work and change the delivery address to reflect SAIC. Vendors are required to sign the admendment form. All other terms and conditions remain the same.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 6

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 02-Jun-2021

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X N0016421Q0136

X 9B. DATED (SEE ITEM 11)

20-May-2021

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

02-Jun-2021

CODE

NAVAL SURFACE WARFARE CENTER CRANE DIV

M. HELTON (812-854-1832)

BLDG 3373

300 HWY 361

CRANE IN 47522-5001

N00164 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

N0016421Q0136

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SECTION SF30 - SF 30 CONTINUATION SHEET

SUMMARY OF CHANGES

SECTION SAP - SAP CONTINUATION SHEET

The required response date/time has changed from 27-May-2021 04:00 PM to 16-Jun-2021 04:00 PM.

The following Delivery Schedule item for CLIN 0001 has been changed from:

DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

26-OCT-2021 1 NAVAL SURFACE WARFARE CENTER

CRANE DIV

M/F: SCOTT HENDERSON (BLDG 41 NE)

BLDG 41 SE CENTRAL RECEIVING

300 HWY 361

CRANE IN 47522-5001

812-854-2546 FOB: Destination

N00164

To:

DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

26-OCT-2021 1 EAST GATE BUSINESS & TECHNOLOGY

(SAIC)

ANDREW FIGG

3290 16TH STREET

BEDFORD IN 47421-3516

Q95443

The following Delivery Schedule item for CLIN 0002 has been changed from:

CAGE

1 yr. ADC 1 NAVAL SURFACE WARFARE CENTER

CRANE DIV

M/F: SCOTT HENDERSON (BLDG 41 NE)

BLDG 41 SE CENTRAL RECEIVING

300 HWY 361

CRANE IN 47522-5001

812-854-2546

N00164

To:

CAGE

1 yr. ADC 1 EAST GATE BUSINESS & TECHNOLOGY

(SAIC)

ANDREW FIGG

3290 16TH STREET

BEDFORD IN 47421-3516

Q95443

The following have been modified:

STATEMENT OF WORK

Naval Surface Warfare Center Crane Division

STATEMENT OF WORK (SOW)

FOR THE

PRODUCTION ACOUSTIC PRESSURE VESSEL

March 22, 2021

DISTRIBUTION STATEMENT D: Distribution authorized to the Department of Defense and U.S. DoD Contractors only (Administrative or Operational Use). Date of determination November 2009. Other requests for this document shall be referred to NSWC Crane Code GXP.

Prepared by Naval Surface Warfare Center Crane Division

Undersea Sensors Guidance Navigation and Control Division Undersea Sensors Management Branch (Code GXPS)

Crane, IN 47522

1.0 SCOPE:

This Statement of Work (SOW) sets forth the requirements for procurement and delivery of an Acoustic Pressure Vessel for acoustic testing of the TR-343 Transducer, AN/SQS-53C Hull Mounted Sonar Array Subsystem, AN/SQQ-89(V) Anti-Submarine Warfare (ASW) System.

The TR-343 Transducer Program is under the cognizance of PMS4013, Hull Sensor Systems, with Naval Surface Warfare Center (NSWC) Crane Division serving as the Acquisition Engineering Agent (AEA) and In-Service Engineering Agent (ISEA).

1.1 Background.

The TR-343 Transducer is part of the AN/SQS-53C Hull Mounted Sonar Array, which is a component of the AN/SQQ-89(V) ASW System. The AN/SQQ-89(V) is a fully integrated Surface Ship Undersea Warfare (USW) combat system with the capability to search, detect, classify, localize, and attack submarine targets. The acoustic testing of the TR-343 is a necessary part of validation and verification, and must be performed on every TR-343.

2.0 APPLICABLE DOCUMENTS:

The Statement of Work (SOW) is the only applicable document.

3.0 REQUIREMENTS:

3.1 General Requirements. The Contractor shall provide the necessary equipment, facilities, resources, management and labor to fabricate, assemble, inspect, test and deliver an Acoustic Pressure Vessel with the following configuration. A drawing package shall be provided by the contractor prior to Pressure Vessel construction for approval by the technical points of contact.

3.1.1 Physical configuration. Acoustic Pressure Vessel shall be a cylinder with dome or hemispherical endcaps operated with the cylinder in a horizontal orientation. Internal Diameter of the cylinder shall be 12 feet (± 2.0% measurement tolerance). The cylindrical portion of the Pressure Vessel shall have a length sufficient for an internal length of 14 feet (± 2.0% measurement tolerance) including end caps. An integrated or attached saddle shall be included to support the Acoustic Tank filled with water (and test equipment up to 500 lbs.) on a horizontal surface.

3.1.1.1 Openings and Access. One (1) 42” diameter hinged opening and lockable dome hatch shall be provided on the top of the Pressure Vessel, 36” offset from the horizontal center. Hatch shall open with a minimum angle of 90° from the closed position to accommodate the lower of test equipment and allow unobstructed access of the openings full 42” diameter. Hatch shall not open greater than 135° from the closed position to protect cables and openings that will be available on the center of the dome hatch. Starting from the locked and closed position, the hatch shall be able to be unlocked and opened to at or beyond the 90° minimum opening and at rest in less than one

(1) minute. Any additional assisting equipment (hydraulic, air, electrical) that is required to meet the locking, opening, and time requirements shall be included with the tank purchase. Assisting equipment shall be confirmed through the COR prior to any purchase or fabrication by the contractor.

A total of eight (8) Nation Pipe Tapered (NPT) openings shall installed that adhere to ANSI/ASME B1.20.1 pipe threads standards and practices. The NPT openings shall be designed and installed with the following description:

•Two (2) 2” NPT openings shall be provided at opposite ends of the tank, one on the lowest part of the cylinder at one end and one at the upper most part of the cylinder on the opposite end.

•Four (4) 2” NPT openings shall be provided on the dome hatch with one located in the center of the dome.

•Two (2) 2” NPT openings shall be provided on the endcaps of the tank, one in the center of each domed end.

3.1.1.2 Operating Conditions. Acoustic Pressure Vessel shall be operated completely filled with fresh untreated tap water, and designed to operate with an internal pressure of 50 psig. Acoustic Pressure Vessel shall be designed in accordance with industry standards to safely accommodate sustained internal pressure of 50 psig. Acoustic Tank shall be made of corrosion resistant material or coated internally and externally sufficiently to remain corrosion free for a minimum of 5 years between re‐coatings. Acoustic Tank shall be designed and built to ASME Pressure Vessel Code appropriate to Acoustic Tank testing requirements.

3.2 Processes and Procedures. The Contractor shall maintain Assembly Fabrication Processes and Test/Inspection Procedures required to fabricate, assemble, inspect and test the Acoustic Pressure Vessel according to industry standard practices. Industry standard safety factors shall be applied to ensure the Acoustic Pressure Vessel can support weight and operating pressure defined in the General Requirements paragraph 3.1 above.

3.3 Packaging/Shipping. Acoustic Test Vessel shall be packaged and shipped in accordance with industry standards and shall be adequately protected from damage during shipment to delivery destination. The Contractor shall select appropriate shipping company for delivery and coordinate with COR delivery logistics and requirements prior to shipment.

4.0 GOVERNMENT FURNISHED INFORMATION (GFI) AND GOVERNMENT FURNISHED

MATERIAL (GFM): The only Government Furnished Information will be this SOW. No Government Furnished Material shall be provided to accomplish the tasking in this SOW.

5.0 SPECIAL CONSIDERATIONS:

5.1 Security Classification. Tasking under this Statement of Work is unclassified.

5.1.1 International Traffic in Arms Regulation (ITAR). The Contractor shall be solely responsible for getting any Department of State approvals, licenses, Technical Assistance Agreements (TAA), etc. required by the International Traffic in Arms Regulations.

5.1.2 Operations Security (OPSEC). The contractor is required to protect critical information associated with this contract to prevent unauthorized disclosure and will observe OPSEC requirements. If Contractor personnel become aware of any person seeking unauthorized access to information or program materials, they should immediately report this to the COR.

5.2 Information Non-Disclosure. The Contractor shall not disclose any information provided or developed under this contract outside the Government without prior approval from the Government.

All technical data provided to the Contractor as GFI shall be protected in accordance with the Distribution Statement included on each document

Distribution authorized to the Department of Defense and United State DoD Contractors only. Reason for restriction: Administrative/operational use. 2 May 2003.

(End of Summary of Changes)