19Q0107_sow.pdf

STATEMENT OF WORK

FOR THE PROCUREMENT OF

ELECTRICAL SOCKETS/ CONTACTS TO BE USED IN THE

MANUFACTURE

OF

SUBMARINE AND SURFACE SHIP

CABLE ASSEMBLIES

1 February 2019

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DOD AND U.S. DOD CONTRACTORS ONLY;

ADMINISTRATIVE/OPERATIONAL USE; 18 JANUARY 2013. OTHER

REQUESTS SHALL BE REFERRED TO PEO IWS-5B.

Naval Surface Warfare Center - Crane 300 Highway 361 Crane, IN 47522

STATEMENT OF WORK

FOR ELECTRICAL CONTACT PINS AND SOCKETS

1.0 SCOPE. This Statement of Work (SOW) sets forth the requirements for the procurement of electrical contact sockets. These parts are required to support the design, manufacture, production, and repair of systems, subsystems, equipment, and components under the cognizance of the Naval Surface Warfare Center Crane Division (NSWC Crane), Platform and Launcher Systems Division, GXP.

1.1 Background. Acquisition of the electrical contact sockets are necessary for Naval Surface Warfare Center (NSWC) Crane to complete tasking from Naval Sea Systems Command (NAVSEA) and Naval Underwater Warfare Center (NUWC) Newport to provide the fleet with various cable assemblies used on acoustic sensor equipment for surface ships and submarines.

2.0 APPLICABLE DOCUMENTS. The following documents of the latest issue as of the date of contract award form a part of this SOW to the extent specified within. In the event of conflict between the documents referenced and the contents of the SOW, the referenced documents shall be considered a superseding requirement

DRAWINGS/ SPECIFICATIONS TITLE

7103222 Rev B Contact, Electrical Connector 7103222-2 Contact, Small Socket 7103222-4 Contact, Large Socket

3.0 REQUIREMENTS. The contractor shall provide the necessary equipment, facilities, resources, management and labor by qualified personnel to fabricate, assemble, inspect, test and deliver the items identified in the table below:

PART # DESCRIPTION

7103222-2 Contact, Small Socket 7103222-4 Contact, Large Socket

3.1 Inspection/Testing. The contractor shall perform standard industrial quality assurance inspections to limit defects, manufacturing flaws, material flaws, dimensional anomalies, contact engagement force, and contact separation force. The contractor is also required to conform to the dimensions, contact engagement force, contact separation force, electrical characteristics and material composition cited in the drawings and standards. Prior to final acceptance of the delivered material, the Government reserves the right to conduct a receiving inspection to ensure the pins and sockets delivered are in compliance with the applicable drawing requirements.

3.2 Certification of Compliance. The contractor shall conduct final inspection to verify compliance to applicable drawings and specifications. A Certificate of Compliance (CDRL A001) shall be provided with delivery.

3.3 Packaging. Electrical pins and sockets delivered under this contract shall be packaged in bulk in accordance with industry standards and shall be adequately protected from damage during shipment.

4.0 GOVERNMENT FURNISHED INFORMATION. The Government will provide the following Government Furnished Information (GFI) to accomplish the tasking in this SOW. No other Government property will be provided.

DRAWING # DESCRIPTION

7103222 Rev B Contact, Electrical Connector

5.0 DATA DELIVERABLES. Data Deliverables shall be submitted to the Government in accordance with Contract Data Requirements List (CDRL).

6.0 SPECIAL CONSIDERATIONS.

6.1 Security Classification. Tasking under this SOW is unclassified.

6.2 Information Non-Disclosure. The contractor shall not disclose any information provided or developed under this contract outside the Government without prior approval from the Government. Contractor shall strictly adhere to Distribution Statements contained in the contract.

6.3 Release of Information. All technical data provided to the contractor as GFI shall be protected from the public. All other information relating to the items to be delivered and services to be performed under this contract may not be disclosed by any means without prior approval of the Government. Dissemination or public disclosure includes, but is not limited to, permitting access to such information by foreign nations, by any other person or entity, or publication of technical or scientific papers, or advertising, or any other proposed public release.

The contractor shall provide adequate physical protection to such information so as to preclude access by any person or entity not authorized such access.

6.4 Technical Points of Contact.

David Miller Phone: 812-854-1226 E-mail: david.g.miller@navy.mil

Doug Henson Phone: 812-854-2292 E-mail: stuart.henson@navy.mil mailto:david.g.miller@navy.mil mailto:stuart.henson@navy.mil