N0010417RK110_Amendment_3.pdf

N0010418NB001

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

1. The CDRLS have been revised and are attached.

2. Sections B and F are revised for lot size adjustments for CLINS 0003 and 0015. The Section B summary page is revised and attached.

Section B notes are also revised to remove the N-ray requirement.

3. Section D is revised for UID information and to add an EEL and EELAC statement of w ork.

4. The closing date is extended.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 20

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 30-Nov-2017

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X N0010417RK110

X 9B. DATED (SEE ITEM 11)

30-Jun-2017

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

30-Nov-2017

CODE

NAVSUP WEAPON SYSTEMS SUPPORT

STACEY ROMBERGER, CODE N742.15

5450 CARLISLE PIKE

PO BOX 2020

MECHANICSBURG PA 17055

N00104 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

N0010417RK110

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION A - SOLICITATION/CONTRACT FORM

The required response date/time has changed from 29-Sep-2017 02:00 PM to 05-Jan-2018 02:00 PM.

SECTION B - SUPPLIES OR SERVICES AND PRICES

SUBCLIN 0003AB

The CLIN extended description has changed to:

Consists of: 2 Lots of 127 each net, plus an additional 15 each per lot for test. (14 each for test and 1 each for investigative purposes). Ownership Code: 3.

The pricing detail quantity has decreased by 12.00 from 40.00 to 28.00.

SUBCLIN 0003AC

Consists of: 2 Lots of 127 each net, plus an additional 15 each per lot for test. (14 each for test and 1 each for investigative purposes). Ownership Code: 3.

The pricing detail quantity has decreased by 4.00 from 6.00 to 2.00.

SUBCLIN 0015AB

Consists of: 8 Lots Total – 7 Lots of 50 each net, plus an additional 9 each per lot for test (8 each for test and 1 each for investigative purposes) and 1 Lot of 39 each net, plus an additional 9 each per lot for test (8 each for test and 1 each for investigative purposes). Ownership Code: 3.

The pricing detail quantity has decreased by 4.00 from 68.00 to 64.00.

SUBCLIN 0015AC

Consists of: 8 Lots Total – 7 Lots of 50 each net, plus an additional 9 each per lot for test (8 each for test and 1 each for investigative purposes) and 1 Lot of 39 each net, plus an additional 9 each per lot for test (8 each for test and 1 each for investigative purposes). Ownership Code: 3.

The pricing detail quantity has increased by 2.00 from 6.00 to 8.00.

The following have been modified:

SECTION B NOTES

SOLICITATION NOTES:

1. This acquisition is restricted to qualified sources. A qualification package is required for new sources. See FAR Clause 52.209-1 for qualification requirements. Potential vendors must first pre-qualify before any offers will be considered. Prospective contractors may submit offers on supplies bearing different part numbers from those cited in the solicitation. Contract award will not be delayed to qualify new sources.

2. Faxed offers will NOT be accepted.

3. Since the Government intends to award without discussion, any exceptions to the requirements of this solicitation should be raised prior to submission of an offer.

4. This item is a CSI – Critical Safety Item.

5. Electronic submission of an offer may be accomplished by attaching your offer to an email directed to stacey.romberger@navy.mil. The size limitation of an email through the NAVSUP WSS mail server is 10 MB. All files designated as .zip files will be stripped from any email sent.

Files larger than the server limitation may be segregated and sent via several emails as long as they are clearly identified as such.

6. All reference to submission of N-Ray requirement is hereby removed.

SECTION D - PACKAGING AND MARKING

SECTION D

SECTION D – UID CAD/PAD ITEM MARKING INFORMATION

The Attachment “CAD/PAD Item Marking Instruction Version 1.3”, prepared by the CAD/PAD Joint Program Office 784 CBSG/GJ Code E25MA, NSWC IHEODTD Indian Head to include sample data is incorporated by reference with the same force and effect as if contained herein. IUID shall be marked in accordance with Lockheed Martin document JO204.

ELECTRONIC EQUIPMENT LOG (EEL) AND ELECTRONIC EQUIPMENT LOG ACCEPTANCE

CERTIFICATE (EELAC) INFORMATION STATEMENT OF WORK

1. The objective is to have an EEL be created for each and every item and receive an EELAC for each and every item prior to lot release.

2. The Contractor shall be responsible for entering EEL information into Logistics Data Manager (LDM), which is a subset/module of the Autonomic Logistics Information System (ALIS). A Lockheed Martin representative/computer system will receive the EEL and either accept or reject it. Once accepted, an EELAC is created. The Contractor shall be responsible for providing a copy of EELAC for each and every item to the Customer via the Contractor’s Sharepoint database within 30 calendar days of receiving the acceptance. An EELAC must be received for all items being shipped, prior to the lot being released. EELs/EELACs shall be processed in accordance with Lockheed Martin document JO825.

SECTION D – PACKING, MARKING, AND TRANSPORTATION (APR 2017)

1. Preservation, packaging, packing, and marking shall be in accordance with MIL-STD-129, MIL-STD-2073, CFR

49 171-178, MIL-STD-1320, DLAR 4145.41, and Section Five (5) of Specification MIL-DTL-85097E (OS) and the following:

2. Packaging and packing for production lots, first article samples and lot acceptance samples shall be IAW the following by item:

CLIN DODIC QUP IAW

0001 JL54 1 UN APPROVED PACKAGING

0002 JN41 1 UN APPROVED PACKAGING

0003 JN42 1 UN APPROVED PACKAGING

0004 JN66 1 UN APPROVED PACKAGING

0005 JN67 1 UN APPROVED PACKAGING

0006 JN68 1 UN APPROVED PACKAGING

0007 JN69 1 UN APPROVED PACKAGING

0008 JN70 1 UN APPROVED PACKAGING

0009 JN71 1 UN APPROVED PACKAGING

0010 JN72 1 UN APPROVED PACKAGING

0011 JN73 1 UN APPROVED PACKAGING

0012 JN74 1 UN APPROVED PACKAGING

0013 JN75 1 UN APPROVED PACKAGING

0014 JN76 1 UN APPROVED PACKAGING

0015 JN77 1 UN APPROVED PACKAGING

3. Labels for Human Readable Information (HRI) and Machine Readable Information (MRI) shall meet the requirements for a Grade A, Style 2, Composition (b) label as specified in MIL-PRF-61002. The performance requirements for solvent and detergent resistance are not required. The label should be the pressure sensitive adhesive type.

4. Human Readable Information (HRI) markings shall be applied to ammunition, explosives containers and units loads IAW the applicable provisions of MIL-STD-129.

a. At a minimum, inner container markings for CLIN 0001 - 0015 shall include:

National Stock Number and (DoD) Code: (see Section “B” for applicable CLIN) Item Nomenclature: (see Section “B” for applicable CLIN) Item Assembly Drawing Number: (see Section “B” for applicable CLIN) Quantity: As Applicable Lot Number: IAW MIL-STD-1168 Serial Number: Required ( x ) N/A ( )

b. At a minimum, outer container markings for CLIN 0001 - 0015 shall include:

National Stock Number and (DoD) Code: (see Section “B” for applicable CLIN) Item Nomenclature: (see section “B” for applicable CLIN) Item Assembly Drawing Number: (see Section “B” for applicable CLIN) Quantity: As Applicable Lot Number: IAW MIL-STD-1168 Serial Number: Required ( x) N/A ( ) Gross Weight and Cube: As Applicable DoD Contract Number: As Applicable POP Markings: (see Section “D” – Packaging & Marking paragraph 3 – below.)

UN Proper Shipping Name, UN Number, Hazard Class, Compatibility Code, Net Explosive Weight, and EX Number: (see TABLE 1 below for applicable CLIN)

CAA: USG DOT 'EX NUMBER'

(see TABLE 1 EX NUMBER COLUMN below for applicable CLIN ) Example CAA: USG DOT 880832

TABLE 1: United Nations Shipping / Storage Information

CLIN NUM

UN PROPER SHIPPING

NAME

UN

NUMBER

HAZARD

CLASS

COMPA.

CODE

NET

EXPLOSIVE

WT (lbs)

EX

NUMBER

0001 (JL54) Cartridges, Power Device 0323 1.4S S 0.0027 -

0002 (JN41) Initiator, Cartridge Actuated 0276 1.4C C 0.251 2016030166 0003 (JN42) Underseat, Rocket Motor 0186 1.3C C 5.75 2009110331 0004 (JN66) Cartridges, Power Device 0276 1.4C C 0.03463 2013051054 0005 (JN67) Cartridges, Power Device 0276 1.4C C 0.00677 2013051055 0006 (JN68) Cartridges, Power Device 0276 1.4C C 0.0096 2013040882 0007 (JN69) Cartridges, Power Device 0276 1.4C C 0.03243 2013040888 0008 (JN70) Cartridges, Power Device 0276 1.4C C 0.03144 2013040538 0009 (JN71) Assembly, Cartridge ADU 0276 1.4C C 0.072 - 0010 (JN72) Cartridges, Power Device 0276 1.4C C 0.0172 2013040875 0011 (JN73) Cartridge Set, Impulse 0276 1.4C C 0.110694 TBD 0012 (JN74) Cartridge Set, Impulse 0276 1.4C C 0.1103631 TBD 0013 (JN75) Cartridge Set, Impulse 0276 1.4C C 0.126499 TBD 0014 (JN76) Cartridges, Power Device 0325 1.4G G 0.0003 - 0015 (JN77) Battery, Thermal - Non-Regulated - 0.000007 -

5. Machine Readable Information (MRI) markings shall be applied to ammunition, explosive containers and unit loads IAW the following coded elements of data from MIL-STD-129. MRI labels shall able to be read and interpreted by automatic bar code reading devices (scanners). MRI markings shall contain the minimum data elements identified below:

a. Inner container:

(N) National Stock Number: (see Section “B” for applicable CLIN)

(4R) Department of Defense identification code (DODIC): (see Section “B” for applicable CLIN)

(1P) Item Assembly Drawing Number: (see Section “B” for applicable CLIN)

(1T) Lot Number: IAW MIL-STD-1168

(S) Serial Number: Required ( x) N/A ( )

b. Outer container:

(N) National Stock Number: (see Section “B” for applicable CLIN)

(4R) Department of Defense identification code (DODIC): (see Section “B” for applicable CLIN)

(1P) Item Assembly Drawing Number: (see Section “B” for applicable CLIN)

(7Q) Quantity: As Applicable

(1T) Lot Number: IAW MIL-STD-1168

(S) Serial Number: Required ( x) N/A ( )

NOTE: The parenthesis surrounding the data elements are NOT encoded in the 2D(PDF417) bar code.

6. The Contractor shall perform testing and acquire data necessary to support compliance with Performance Oriented Packaging (POP) requirements of hazardous materials as defined in Title 49, Code of Federal Regulations (CFR), the International Maritime Organization’s International Maritime Dangerous Goods (IMDG) Code, and the International Civil Aviation Organization (ICAO) Technical Instructions for the safe transport of hazardous goods.

Testing shall be performed in accordance with American Society for Testing and Materials (ASTM) D4919, Testing of Hazardous Material Packaging. The Contractor shall prepare a Performance Oriented Packaging (POP) Test Report in accordance with DI-PACK-81059. The POP Test Report shall be in accordance with the contract data requirements list (CDRL) DD FORM 1423, sequence number A002. The POP Test Report shall include the contract number, DODIC, and item nomenclature, National Stock Number (NSN) of the item and the Government drawing and/or contractor’s Part Number. A printed copy of the applicable POP report shall be included with each shipment.

a: POP Test Report is not required for non-explosives and non-regulated items.

b: Foreign Military Sales (FMS) Shipments: As applicable, all outer containers should be clearly marked with the FMS Case Designation, Requisition Number and Project Code, and Country Specific EX Numbers for

NOA required shipments- See Section "F" for proper identification.

7. Traceable Seals for shipping containers:

a. Traceable seals are required for delivery of all "ready to issue" (condition code A, B, C, or N) or "pending acceptance" (condition code D) ammunition and ordnance items, including inert configuration items.

Traceable seals provide an indication of security and certification of material serviceability and apply to more than just hazardous materials.

b. The Contractor shall ensure traceable seals are properly affixed in accordance with these requirements:

1. Traceable seals are applied to each shipping and storage container at the time of packaging. The shipping container will normally be the outer container.

2. WIRE SEALS: A wire seal is a wire length with an aluminum disk or pellet which is crimped or crushed using a die which imprints a “U.S.” symbol on the disk/pellet. Wire seals are applied to containers having provisions or means for application of wire seals, e.g., metal containers, drums, or cradles and wood boxes with hinged covers and/or latches.

3. LABEL SEALS: A label seal is a nonmetallic label with a pressure sensitive backing and which is printed or stamped with a “U.S” symbol. Label seals are applied to containers which do not have provisions or means for application of wire seals, e.g., fiberboard or wood boxes without hasps or latches.

4. Label seals shall be applied such that the label must be cut or defaced in order to open a container.

Adhesives shall adhere well enough to prevent peeling during shipping conditions and well enough to prevent lifting and replacement of the label. Particular consideration shall be given to label seals required to adhere to wood and fiberboard surfaces.

8. Restrictions Involving Non-Manufactured Wood Packaging (NMWP) and Pallets (per Defense Logistics Agency Directive subpart 47.305-1(c)(90): “All wooden pallets and wood containers produced of non-manufactured wood shall be constructed from Heat Treated (HT to 56 degrees Centigrade for 30 minutes) material and certified by an accredited agency recognized by the American Lumber Standards Committee (ALSC) in accordance with Non-manufactured Wood Packing Policy and Non-manufactured Wood Packing Enforcement Regulations, both dated May 30, 2001.”

SECTION D – PALLETIZATION (MAR 2008)

Production Lot units shall be palletized in accordance MIL-STD-1322, MIL-STD-1322-1000, MIL-STD-129, MIL- STD-1320, and CFR 49 171-178 with the following exceptions:

a. Edge protectors shall be used under all strapping.

SECTION D – AMMUNITION LOT NUMBERING: MIL-STD-1168 (APR 2017)

Ammunition lot numbering shall be in accordance with MIL-STD-1168 (and MIL-DTL-85097 for Propellant Actuated Devices). The applicable lot interfix series number will be furnished in the signed contract.

*Lot number formulation shall consist of the following:

a. The Contractor symbol: Only approved symbol is to be used. Requests for approval of marking symbol are to be submitted via the Government Inspector. Refer to MIL-HDBK-1461 for guidance, which is available on the WARP Website.

b. The year and the alpha code designating the month in which final assembly for end item of the representative lot begins (CADs only)

The year and the alpha code designating the year and month of manufacture of the oldest batch of propellant in the lot (PADs only).

c. The assigned lot interfix number (provided by NSWC IHEODTD at time of award).

d. The sequence number shall be consecutive for each production lot manufactured (sequence number shall not be repeated).

e. Serialization of sub-assembly or end item under this contract shall meet the requirements of MIL-STD-1168.

Serial numbers Shall Not be repeated on the same part numbered item regardless of changes in lot numbers.

f. When grouped lots occur, kit lot formulation shall use lot identifier code "G". NOTE: Serial numbers (S/N's) are not part of the lot number. S/N's shall be assigned separately and in sequence.

(Example. Lot ABC97J009G001, S/N's 001-018)

Ammunition Lot number designation Sample:

IHM 93 D 002 - 007

a b c d e

KEY:

a Manufacturer’s Identification Code.

b The year in which final assembly for end item of the representative lot begins (CADs only) or the year of manufacture of the oldest batch of propellant in the lot (PADs only).

c The month in which final assembly for end item of the representative lot begins (CADs only) or the year of manufacture of the oldest batch of propellant in the lot expressed as an alpha code (PADs only) in accordance with 4.1.3 of MIL-STD-1168 d Lot interfix number – lot number (provided and controlled by NSWC IHEODTD AMS).

e Lot sequence number – lot number (manufacturer responsible for the assignment of lot numbers).

SECTION F - DELIVERIES OR PERFORMANCE

SECTION F

SECTION F – DELIVERIES OR PERFORMANCE (MAY 2013)

Unless otherwise indicated in this contract, accelerated delivery is desirable and acceptable at no additional cost to the Government. The addresses for the activities designated to receive supplies are listed below:

LINE / SUBLINE ITEM

AND QTY SHIP TO: MARK FOR:

0001AB

0002AB

0003AB

0004AB

0005AB

0006AB

0007AB

0008AB

0009AB

0010AB

0014AB

0015AB

(LAT)

60 EA

64 EA

28 EA

64 EA

96 EA

64 EA

100 EA

50 EA

50 EA

100 EA

20 EA

64 EA

SHIP IN PLACE

(testing at contractor’s facility)

LOT ACCEPTANCE TEST SAMPLES

(INCLUDE LOT NUMBER AND

SERIAL NUMBERS IN WAWF)

0001AC

0002AC

0003AC

0004AC

0005AC

0006AC

0007AC

0008AC

0009AC

0010AC

0014AC

0015AC

(Retains)

9 EA

6 EA

2 EA

6 EA

9 EA

6 EA

6 EA

3 EA

3 EA

6 EA

3 EA

8 EA

N00174

RECEIVING OFFICER

NSWC IHEODTD EXPLOSIVE

SCALES FACILITY

5021 Safe Haven Way Indian Head, MD 20640-5173

Explosive Scales (BLDG 1103/1104)

RETAIN SAMPLES

ATTN: William Reed, x1617 Ownership Code: 3 Condition Code D

0001AD

0002AE

0003AE

0004AD

0005AD

0006AD

0007AD

0008AD

0009AD

0010AD

0015AE

50 EA

50 EA

20 EA

50 EA

100 EA

50 EA

100 EA

50 EA

50 EA

100 EA

6 EA

TBD FY18 JSF F-35A, USAF, USA

Sustainment

0001AE

0002AF

0003AF

0004AE

0005AE

0006AE

0007AE

0008AE

0009AE

0010AE

0012AD

0013AD

0015AF

16 EA

7 EA

17 EA

16 EA

20 EA

4 EA

8 EA

4 EA

4 EA

8 EA

4 EA

4 EA

17 EA

TBD FY18 JSF F-35A, USAF, USA Global Pool

0001AF

0002AH

0003AH

0004AF

0005AF

0006AF

0007AF

0008AF

0009AF

0010AF

0013AE

0014AD

0015AH

17 EA

17 EA

8 EA

17 EA

34 EA

17 EA

34 EA

17 EA

17 EA

34 EA

22 EA

17 EA

2 EA

TBD FY18 JSF F-35B, USMC, USA

Sustainment

0001AG

0002AJ

0003AJ

0004AG

0005AG

0006AG

0007AG

0008AG

0009AG

0010AG

0011AD

0013AF

0014AE

0015AJ

9 EA

5 EA

9 EA

9 EA

11 EA

2 EA

5 EA

2 EA

2 EA

5 EA

3 EA

3 EA

34 EA

9 EA

TBD FY18 JSF F-35B, USMC, USA Global Pool

0001AH

0002AL

9 EA

9 EA

TBD FY18 JSF F-35C, USN, USA Sustainment

0003AL

0004AH

0005AH

0006AH

0007AH

0008AH

0009AH

0010AH

0015AL

6 EA

9 EA

18 EA

9 EA

18 EA

9 EA

9 EA

18 EA

2 EA

0001AJ

0002AM

0003AM

0004AJ

0005AJ

0006AJ

0007AJ

0008AJ

0009AJ

0010AJ

0012AF

0013AH

0015AM

8 EA

4 EA

9 EA

8 EA

10 EA

2 EA

3 EA

2 EA

2 EA

3 EA

2 EA

2 EA

9 EA

TBD FY18 JSF F-35C, USN, USA Global Pool

0001AK

0002AP

0004AK

0005AK

0006AK

0007AK

0008AK

0009AK

0010AK

0014AF

3 EA

3 EA

3 EA

6 EA

3 EA

6 EA

3 EA

3 EA

6 EA

1 EA

TBD FY18 JSF F-35, Italy Sustainment

0001AL

0002AQ

0003AP

0004AL

0005AL

0006AL

0007AL

0008AL

0009AL

0010AL

0011AF

0012AF

0013AK

0014AG

0015AP

2 EA

1 EA

1 EA

2 EA

2 EA

1 EA

1 EA

1 EA

1 EA

1 EA

1 EA

1 EA

1 EA

2 EA

1 EA

TBD FY18 JSF F-35, Italy Global Pool

0001AM

0002AS

0004AM

0005AM

0006AM

0007AM

7 EA

7 EA

7 EA

14 EA

7 EA

14 EA

TBD FY18 JSF F-35, Norway Sustainment

0008AM

0009AM

0010AM

7 EA

7 EA

14 EA

0001AN

0002AT

0003AR

0004AN

0005AN

0006AN

0007AN

0008AN

0009AN

0010AN

0012AK

0013AM

0015AR

4 EA

1 EA

2 EA

4 EA

4 EA

1 EA

2 EA

1 EA

1 EA

2 EA

1 EA

1 EA

2 EA

TBD FY18 JSF F-35, Norway Global Pool

0001AP

0002AV

0003AT

0004AP

0005AP

0006AP

0007AP

0008AP

0009AP

0010AP

1 EA

1 EA

1 EA

1 EA

2 EA

1 EA

2 EA

1 EA

1 EA

2 EA

TBD FY18 JSF F-35, Netherlands Sustainment

0001AQ

0002AW

0003AU

0004AQ

0005AQ

0006AQ

0007AQ

0008AQ

0009AQ

0010AQ

0012AM

0013AP

0015AT

1 EA

1 EA

3 EA

1 EA

1 EA

1 EA

1 EA

1 EA

1 EA

1 EA

1 EA

1 EA

3 EA

TBD FY18 JSF F-35, Netherlands Global Pool

0001AR

0002BC

0004AR

0005AR

0006AR

0007AR

0008AR

0009AR

0010AR

4 EA

4 EA

4 EA

8 EA

4 EA

8 EA

4 EA

4 EA

8 EA

TBD FY18 JSF F-35, Israel Sustainment

0001AS

0002BD

0003BA

0004AS

0005AS

2 EA

2 EA

3 EA

2 EA

3 EA

TBD FY18 JSF F-35, Israel Global Pool

0006AS

0007AS

0008AS

0009AS

0010AS

0012AT

0013AV

0015AZ

1 EA

1 EA

1 EA

1 EA

1 EA

1 EA

1 EA

4 EA

0001AT

0002BH

0004AT

0005AT

0006AT

0007AT

0008AT

0009AT

0010AT

2 EA

2 EA

2 EA

4 EA

2 EA

4 EA

2 EA

2 EA

4 EA

TBD FY18 JSF F-35, Australia Sustainment

0001AU

0002BJ

0003BE

0004AU

0005AU

0006AU

0007AU

0008AU

0009AU

0010AU

0012AX

0013AZ

0015BD

1 EA

2 EA

4 EA

1 EA

2 EA

1 EA

1 EA

1 EA

1 EA

1 EA

1 EA

1 EA

5 EA

TBD FY18 JSF F-35, Australia Global Pool

0001AV

0002BN

0004AV

0005AV

0006AV

0007AV

0008AV

0009AV

0010AV

2 EA

2 EA

2 EA

4 EA

2 EA

4 EA

2 EA

2 EA

4 EA

TBD FY18 JSF F-35, Japan Sustainment

0001AQ

0002BP

0003BJ

0004AW

0005AW

0006AW

0007AW

0008AW

0009AW

0010AW

0012BB

0013BD

0015BH

1 EA

1 EA

2 EA

1 EA

2 EA

1 EA

1 EA

1 EA

1 EA

1 EA

1 EA

1 EA

2 EA

TBD FY18 JSF F-35, Japan Global Pool

0001AX 5 EA TBD FY18 JSF F-35, UK Sustainment

0002BR

0004AX

0005AX

0006AX

0007AX

0008AX

0009AX

0010AX

0014AH

5 EA

5 EA

10 EA

5 EA

10 EA

5 EA

5 EA

10 EA

5 EA

0001AY

0002BS

0003BL

0004AY

0005AY

0006AY

0007AY

0008AY

0009AY

0010AY

0011AH

0013BF

0014AJ

0015BK

3 EA

1 EA

1 EA

3 EA

3 EA

1 EA

1 EA

1 EA

1 EA

1 EA

1 EA

1 EA

10 EA

1 EA

TBD FY18 JSF F-35, UK Global Pool

0002AD

0003AD

0012AC

0013AC

0015AD

49 EA

49 EA

49 EA

49 EA

98 EA

Q95433 JSF F35 Program LM Aeronautics C-O CEVA Gov’t Svcs 5300 Alliance Gateway Fwy, Suite 100 Fort Worth, TX 76177-3704

FY18 JSF F-35A, USAF, USA Production ATTN: Sam Feliciano 215-697-2769

0002AG

0003AG

0011AC

0015AG

22 EA

22 EA

22 EA

44 EA

Q95433 JSF F35 Program LM Aeronautics C-O CEVA Gov’t Svcs 5300 Alliance Gateway Fwy, Suite 100 Fort Worth, TX 76177-3704

FY18 JSF F-35B, USMC, USA Production ATTN: Sam Feliciano 215-697-2769

0002AK

0003AK

0012AE

0013AG

0015AK

10 EA

10 EA

10 EA

10 EA

20 EA

Q95433 JSF F35 Program LM Aeronautics C-O CEVA Gov’t Svcs 5300 Alliance Gateway Fwy, Suite 100 Fort Worth, TX 76177-3704

FY18 JSF F-35C, USN, USA Production ATTN: Sam Feliciano 215-697-2769

0002AN

0003AN

0011AE

0012AG

0013AJ

0015AN

3 EA

3 EA

1 EA

2 EA

3 EA

6 EA

Q95433 JSF F35 Program LM Aeronautics C-O CEVA Gov’t Svcs 5300 Alliance Gateway Fwy, Suite 100 Fort Worth, TX 76177-3704

FY18 JSF F-35, Italy Production ATTN: Sam Feliciano 215-697-2769

0002AR

0003AQ

0012AJ

0013AL

0015AQ

6 EA

6 EA

6 EA

6 EA

12 EA

Q95433 JSF F35 Program LM Aeronautics C-O CEVA Gov’t Svcs 5300 Alliance Gateway Fwy, Suite 100 Fort Worth, TX 76177-3704

FY18 JSF F-35, Norway Production ATTN: Sam Feliciano 215-697-2769

0002AU

0003AS

0012AL

0013AN

0015AS

7 EA

7 EA

7 EA

7 EA

14 EA

Q95433 JSF F35 Program LM Aeronautics C-O CEVA Gov’t Svcs 5300 Alliance Gateway Fwy, Suite 100 Fort Worth, TX 76177-3704

FY18 JSF F-35, Netherlands Production ATTN: Sam Feliciano 215-697-2769

0002AX

0003AV

0012AN

0013AQ

0015AU

2 EA

2 EA

2 EA

2 EA

4 EA

Q95433 JSF F35 Program LM Aeronautics C-O CEVA Gov’t Svcs 5300 Alliance Gateway Fwy, Suite 100 Fort Worth, TX 76177-3704

FY18 JSF F-35, Denmark Production ATTN: Sam Feliciano 215-697-2769

0002AY

0003AW

0012AP

0013AR

0015AV

1 EA

1 EA

1 EA

1 EA

1 EA

TBD FY18 JSF F-35, Denmark Global Pool

0002AZ

0003AX

0012AQ

0013AS

0015AW

4 EA

4 EA

4 EA

4 EA

8 EA

Q95433 JSF F35 Program LM Aeronautics C-O CEVA Gov’t Svcs 5300 Alliance Gateway Fwy, Suite 100 Fort Worth, TX 76177-3704

FY18 JSF F-35, Canada Production ATTN: Sam Feliciano 215-697-2769

0002BA

0003AY

0012AR

0013AT

0015AX

1 EA

2 EA

1 EA

1 EA

2 EA

TBD FY18 JSF F-35, Canada Global Pool

0002BB

0003AZ

0012AS

0013AU

0015AY

11 EA

11 EA

11 EA

11 EA

22 EA

Q95433 JSF F35 Program LM Aeronautics C-O CEVA Gov’t Svcs 5300 Alliance Gateway Fwy, Suite 100 Fort Worth, TX 76177-3704

FY18 JSF F-35, Israel Production ATTN: Sam Feliciano 215-697-2769

0002BE

0003BB

0012AU

0013AW

0015BA

8 EA

8 EA

8 EA

8 EA

16 EA

Q95433 JSF F35 Program LM Aeronautics C-O CEVA Gov’t Svcs 5300 Alliance Gateway Fwy, Suite 100 Fort Worth, TX 76177-3704

FY18 JSF F-35, Turkey Production ATTN: Sam Feliciano 215-697-2769

0002BF

0003BC

0012AV

0013AX

0015BB

1 EA

3 EA

1 EA

1 EA

3 EA

TBD FY18 JSF F-35, Turkey Global Pool

0002BG

0003BD

0012AW

0013AY

0015BC

15 EA

15 EA

15 EA

15 EA

30 EA

Q95433 JSF F35 Program LM Aeronautics C-O CEVA Gov’t Svcs 5300 Alliance Gateway Fwy, Suite 100 Fort Worth, TX 76177-3704

FY18 JSF F-35, Australia Production ATTN: Sam Feliciano 215-697-2769

0002BK

0003BF

12 EA

12 EA

Q95433 JSF F35 Program

FY18 JSF F-35, Korea Production

0012AY

0013BA

0015BE

12 EA

12 EA

24 EA

LM Aeronautics C-O CEVA Gov’t Svcs 5300 Alliance Gateway Fwy, Suite 100 Fort Worth, TX 76177-3704

215-697-2769

0002BL

0003BG

0012AZ

0013BB

0015BF

1 EA

4 EA

1 EA

1 EA

4 EA

TBD FY18 JSF F-35, Korea Global Pool

0002BM

0003BH

0012BA

0013BC

0015BG

6 EA

6 EA

6 EA

6 EA

12 EA

Q95433 JSF F35 Program LM Aeronautics C-O CEVA Gov’t Svcs 5300 Alliance Gateway Fwy, Suite 100 Fort Worth, TX 76177-3704

FY18 JSF F-35, Japan Production ATTN: Sam Feliciano 215-697-2769

0002BQ

0003BK

0011AG

0013BE

0015BJ

3 EA

3 EA

3 EA

3 EA

6 EA

Q95433 JSF F35 Program LM Aeronautics C-O CEVA Gov’t Svcs 5300 Alliance Gateway Fwy, Suite 100 Fort Worth, TX 76177-3704

FY18 JSF F-35, UK Production

215-697-2769

NOTE: The above Mark For information is to be noted on the WAWF-RR for each applicable subline item.

CAD/PAD ADDITIONAL NOTES:

a. A WAWF-RR shall be furnished for each lot of test samples shipped.

b. The following data shall be furnished on the WAWF-RR shipping document.

1. Lot Number

2. Lot Size Total (consists of net, test and investigative)

3. Net quantity shipped to consignee

a. Item quantity shipped to consignee

b. Total item quantity shipped to consignee

c. Item quantity due consignee

d. GBL and method of shipment

4. Test units - lot size represented by number of test units forwarded for test. (Total test units equals test samples plus investigative or retained samples.)

5. The WAWF-RR shall be marked as applicable, i.e., "First Article Test Sample," "Lot Acceptance Test Sample," "Production M/F Stock and Issue" and/or other mark for (M/F) instructions contained in this section.

SECTION F – REPORT OF SHIPMENT (MAR 2016)

The Contractor shall provide an advanced Report of Shipment (REPSHIP) per clause 52.247-68 to the AMS listed in Section H no later than 24 hours prior to the shipment arrival, and for ammunition shipments no later than two hours after shipment departure. Failure to provide a REPSHIP can result in shipments being denied at point of disembarkation and returned to the point of embarkation for reshipment at the contractor’s expense. A REPSHIP can be in the contractor’s format but shall include at a minimum all the following data:

REPSHIP Data Requirements for Individual Shipments of Hazardous Material (HAZMAT) and Inert Component Parts - Continental United States (CONUS) to CONUS, CONUS to Overseas or From All Overseas Locations

FROM: Shipping Activity To: IHEODTD AMS (See Section H)

SUBJ: Report of Shipment (REPSHIP)

1. Shipment Date written as a three-digit day of the year (Julian)

2. Estimated Time of Arrival (ETA) written as a three-digit day of the year (Julian) (Observe Standard Transit

Time (STT), if CONUS Truck Shipment and no Required Delivery Date (RDD) identified)

3. Required Delivery Date (RDD) or Delivery Date (DD), if specified

4. Carrier

5. Bill of Lading (BL) Number (Notes 1, 2, 3, 4)

6. Military Traffic Expediting-Greater Security (MTX-GS) Service Number (Notes 1, 2, 3)

7. Air Release Number (Notes 1, 2, 3) or for Surface Shipments, Export Traffic Release (ETR) Number and

Vessel Name and/or Voyage Document Number

8. Shipment (Cargo) Name (Example: Bombs)

9. Container and Seal Number (if applicable):

a. Container Transportation Control Number (TCN)

b. Total Weight of Contents

c. Rounds, Pieces, Weight, Cube, Condition code, and Lot Numbers (Note 4)

10. Security Risk Category (SRC), (E.G., Security Risk Category I, II, III, IV, Unclassified, Confidential, Secret, None)

11. Controlled Item Inventory Code (CIIC)

12. Total Net Explosive Weight (NEW)

13. Hazard Classification (s)

14. Department of Defense Identification Code / Navy Ammunition Logistic Code (DODIC/NALC). (Note 4).

15. Name, address, and phone number of person responsible for information contained in REPSHIP

NOTES:

1. When the conveyance contains more than one shipment unit, repeat the data elements in separately lettered paragraphs for each shipment unit.

2. Cargo for more than one vessel or flight, but shipped to Port of Embarkation (POE) in a single conveyance, is included in a single REPSHIP. When cargo for a single vessel is moved to the Seaport of Embarkation (SPOE) in more than one conveyance, repeat all the data elements as above in separate numbered paragraphs for each conveyance or REPSHIP.

3. A separate REPSHIP is used for each mode of shipment to the POE.

4. Lot number, DODIC and NALC are not mandatory fields. If available, they may be provided in the electronic

RESHIP or in the template above. If a CBL is used, the lot number and ammunition condition code should be included in the remarks section. Weapons must be identified on the CBL by each serial number contained within the shipment.

5. DODIC and NALC are codes used specifically for logistic administration and control of ammunition.

SECTION F – FOREIGN MILITARY SALES (FMS) SHIPMENTS (FEB 2006)

The Cognizant DCMA Transportation Office shall forward copies of the Notice of Availability for all FMS shipments to the activities listed below:

COMMANDER NSWC IHEODTD FAX: 301-744-6699 ATTN: CODE: AMS Per Section H

52.211-8 TIME OF DELIVERY (JUN 1997)

(a) The Government requires delivery to be made according to the following schedule:

REQUIRED DELIVERY SCHEDULE

Item Quantity Days A001 (Product Baseline) 1 Set 90 DADC

A002 (POP Report) 1 Set 20 DAYS BEFORE

TEST

A003 (LAT Report) 1 Set 15 days after test

A004 (FAR/CAR) A/R A/R

A005 (ATP) 1 Set 60 DADC A006 (Radiographic Test Technique) 1 Set 90 DADC A007 (Radiographic Report and Film) 1 Set 20 days before test

A008 (Configuration Marriage Record) *As applicable* 1 Set 20 days before test A009 (Energetic Materials Analysis) 1 Set 20 days before test

A010 (Ammo Data Card – Preliminary) 1 Set 20 days before test A010 (Ammo Data Card – Final) 1 Set 5 days after lot release

A011 (Packaging Kit Contents List) **CLINS 0011, 0012, 0013 only

1 Set 5 days prior to shipment

All LAT dates must be prior to February 1, 2019

Delivery Schedule

LAT/RETAIN

0001 (JL56) lot 1of 3 - LAT 23 EA 0001 (JL56) lot 2 of 3 - LAT 23 EA 0001 (JL56) lot 3 of 3 - LAT 23 EA 0002 (JN41) lot 1 of 2 - LAT 35 EA 0002 (JN41) lot 2 of 2 - LAT 35 EA

0003 (JN42) lot 1 of 2 – LAT 15 EA 0003 (JN42) lot 2 of 2 – LAT 15 EA 0004 (JN66) lot 1 of 2 – LAT 35 EA 0004 (JN66) lot 2 of 2 – LAT 35 EA

0005 (JN67) lot 1 of 3 – LAT 35 EA 0005 (JN67) lot 2 of 3 – LAT 35 EA 0005 (JN67) lot 3 of 3 – LAT 35 EA 0006 (JN68) lot 1 of 2 – LAT 35 EA 0006 (JN68) lot 2 of 2 – LAT 35 EA

0007 (JN69) lot 1 of 2 - LAT 53 EA 0007 (JN69) lot 2 of 2 - LAT 53 EA

0008 (JN70) 1 lot – LAT 53 EA

0009 (JN71) 1 lot – LAT 53 EA

DADC = Days after Date of Contract

The Government will evaluate equally, as regards time of delivery, offers that propose delivery of each quantity within the applicable delivery period specified above. Offers that propose delivery that will not clearly fall within the applicable required delivery period specified above, will be considered nonresponsive and rejected. The Government reserves the right to award under either the required delivery schedule or the proposed delivery schedule, when an offeror offers an earlier delivery schedule than required above. If the offeror proposes no other delivery schedule, the required delivery schedule above will apply.

OFFEROR'S PROPOSED DELIVERY SCHEDULE

0010 (JN72) lot 1 of 2 - LAT 53 EA 0010 (JN72) lot 2 of 2 - LAT 53 EA

0014 (JN76) 1 lot – LAT 23 EA

0015 (JN77) lot 1 of 8 - LAT 9 EA 0015 (JN77) lot 2 of 8 - LAT 9 EA 0015 (JN77) lot 3 of 8 - LAT 9 EA 0015 (JN77) lot 4 of 8 - LAT 9 EA 0015 (JN77) lot 5 of 8 - LAT 9 EA 0015 (JN77) lot 6 of 8 - LAT 9 EA 0015 (JN77) lot 7 of 8 - LAT 9 EA 0015 (JN77) lot 8 of 8 - LAT 9 EA

Deliverable units are due 110 days after LAT date. (30 days to test, 15 for test report submission, 20 for review, 45 day estimate to ship. See Section E for more information.)

110 Days After LAT

Item Quantity Days A001 (Product Baseline) 1 Set

A002 (POP Report) 1 Set A003 (LAT Report) 1 Set

A004 (FAR/CAR) A/R

A005 (ATP) 1 Set A006 (Radiographic Test Technique) 1 Set A007 (Radiographic Report and Film) 1 Set

A008 (Configuration Marriage Record) *As applicable* 1 Set A009 (Energetic Materials Analysis) 1 Set

A010 (Ammo Data Card – Preliminary) 1 Set A010 (Ammo Data Card – Final) 1 Set

A011 (Packaging Kit Contents List) **CLINS 0011, 0012, 0013 only

1 Set

All LAT dates must be prior to February 1, 2019

b) Attention is directed to the Contract Award provision of the solicitation that provides that a written award or acceptance of offer mailed, or otherwise furnished to the successful offeror, results in a binding contract. The Government will mail or otherwise furnish to the offeror an award or notice of award not later than the day award is dated. Therefore, the offeror should compute the time available for performance beginning with the actual date of

Delivery Schedule Item Quantity Days

LAT/RETAIN

0001 (JL56) lot 1of 3 - LAT 23 EA 0001 (JL56) lot 2 of 3 - LAT 23 EA 0001 (JL56) lot 3 of 3 - LAT 23 EA 0002 (JN41) lot 1 of 2 - LAT 35 EA 0002 (JN41) lot 2 of 2 - LAT 35 EA

0003 (JN42) lot 1 of 2 – LAT 15 EA 0003 (JN42) lot 2 of 2 – LAT 15 EA 0004 (JN66) lot 1 of 2 – LAT 35 EA 0004 (JN66) lot 2 of 2 – LAT 35 EA

0005 (JN67) lot 1 of 3 – LAT 35 EA 0005 (JN67) lot 2 of 3 – LAT 35 EA 0005 (JN67) lot 3 of 3 – LAT 35 EA 0006 (JN68) lot 1 of 2 – LAT 35 EA 0006 (JN68) lot 2 of 2 – LAT 35 EA

0007 (JN69) lot 1 of 2 - LAT 53 EA 0007 (JN69) lot 2 of 2 - LAT 53 EA

0008 (JN70) 1 lot – LAT 53 EA

0009 (JN71) 1 lot – LAT 53 EA 0010 (JN72) lot 1 of 2 - LAT 53 EA 0010 (JN72) lot 2 of 2 - LAT 53 EA

0014 (JN76) 1 lot – LAT 23 EA

0015 (JN77) lot 1 of 8 - LAT 9 EA 0015 (JN77) lot 2 of 8 - LAT 9 EA 0015 (JN77) lot 3 of 8 - LAT 9 EA 0015 (JN77) lot 4 of 8 - LAT 9 EA 0015 (JN77) lot 5 of 8 - LAT 9 EA 0015 (JN77) lot 6 of 8 - LAT 9 EA 0015 (JN77) lot 7 of 8 - LAT 9 EA 0015 (JN77) lot 8 of 8 - LAT 9 EA

Deliverable units are due 110 days after LAT date. (30 days to test, 15 for test report submission, 20 for review, 45 day estimate to ship. See Section E for more information.)

110 Days After LAT award, rather than the date the written notice of award is received from the Contracting Officer through the ordinary mails. However, the Government will evaluate an offer that proposes delivery based on the Contractor's date of receipt of the contract or notice of award by adding (1) five calendar days for delivery of the award through the ordinary mails, or (2) one working day if the solicitation states that the contract or notice of award will be transmitted electronically. (The term "working day" excludes weekends and U.S. Federal holidays.) If, as so computed, the offered delivery date is later than the required delivery date, the offer will be considered nonresponsive and rejected.

(End of clause)

(End of Summary of Changes)

Text1: 19