Solicitation_17RK086.pdf

CODE

(Hour)

PAGE(S)

until 02:00 PM local time 28 Jun 2017

X

A

X B

X C X D

EX

X

G

F 51 - 67

68 - 72

X H 73 tania.hockenberry@navy .mil

RATING PAGE OF PAGES

7. ISSUED BY

(Date)

IMPORTANT - Award will be made on this Form, or on Standard Form 26, or by other authorized official written notice.

Previous Edition is Unusable 33-134 STANDARD FORM 33 (REV. 9-97)

Prescribed by GSA

FAR (48 CFR) 53.214(c)

DO-A6 1 73

(If other than Item 7)

15A. NAME 16. NAME AND TITLE OF PERSON AUTHORIZED TO

AND

ADDRESS

SIGN OFFER (Type or print)

OF

OFFEROR

AMENDMENT NO. DATE

15B. TELEPHONE NO (Include area code) 17. SIGNATURE15C. CHECK IF REMITTANCE ADDRESS

IS DIFFERENT FROM ABOVE - ENTER

SUCH ADDRESS IN SCHEDULE.

18. OFFER DATE

1. THIS CONTRACT IS A RATED ORDER

UNDER DPAS (15 CFR 700)

2. CONTRACT NO.

N00104 8. ADDRESS OFFER TO

See Item 7

9. Sealed offers in original and 1 copies for furnishing the supplies or services in the Schedule will be received at the place specified in Item 8, or if handcarried, in the depository located in

CAUTION - LATE Submissions, Modifications, and Withdrawals: See Section L, Provision No. 52.214-7 or 52.215-1. All offers are subject to all terms and electronically conditions contained in this solicitation.

10. FOR INFORMATION

CALL:

A. NAME (NO COLLECT CALLS)

TANIA L. HOCKENBERRY 717-605-7863

11. TABLE OF CONTENTS

SOLICITATION/ CONTRACT FORM

SUPPLIES OR SERVICES AND PRICES/ COSTS

2 - 7

X I CONTRACT CLAUSES

DESCRIPTION/ SPECS./ WORK STATEMENT X

PACKAGING AND MARKING

8 - 10

11 - 13

J LIST OF ATTACHMENTS

INSPECTION AND ACCEPTANCE

DELIVERIES OR PERFORMANCE

14 - 15

16 - 19 X K

REPRESENTATIONS, CERTIFICATIONS AND

OTHER STATEMENTS OF OFFERORS

CONTRACT ADMINISTRATION DATA 20 - 22 X

SPECIAL CONTRACT REQUIREMENTS

OFFER (Must be fully completed by offeror) 23 - 25 X M

L INSTRS., CONDS., AND NOTICES TO OFFERORS

EVALUATION FACTORS FOR AWARD

NOTE: Item 12 does not apply if the solicitation includes the provisions at 52.214-16, Minimum Bid Acceptance Period.

is inserted by the offeror) from the date for receipt of offers specified above, to furnish any or all items upon which prices are offered at the price set opposite each item, delivered at the designated point(s), within the time specified in the schedule.

13. DISCOUNT FOR PROMPT PAYMENT

(See Section I, Clause No. 52.232-8)

14. ACKNOWLEDGMENT OF AMENDMENTS

(The offeror acknowledges receipt of amendments

AMENDMENT NO. DATE

to the SOLICITATION for offerors and related documents numbered and dated):

FACILITY

12. In compliance with the above, the undersigned agrees, if this offer is accepted within calendar days (60 calendar days unless a different period

SOLICITATION, OFFER AND AWARD

X

(X) SEC. DESCRIPTION (X) SEC. DESCRIPTION PAGE(S)

PART I - THE SCHEDULE

26. NAME OF CONTRACTING OFFICER (Type or print) 27. UNITED STATES OF AMERICA 28. AWARD DATE

EMAIL:TEL: (Signature of Contracting Officer)

CODE CODE

B. TELEPHONE (Include area code) C. E-MAIL ADDRESS

AWARD (To be completed by Government)

19. ACCEPTED AS TO ITEMS NUMBERED 20. AMOUNT 21. ACCOUNTING AND APPROPRIATION

22. AUTHORITY FOR USING OTHER THAN FULL AND OPEN COMPETITION:

10 U.S.C. 2304(c)( ) 41 U.S.C. 253(c)( ) (4 copies unless otherwise specified)

23. SUBMIT INVOICES TO ADDRESS SHOWN IN ITEM

24. ADMINISTERED BY (If other than Item 7) CODE 25. PAYMENT WILL BE MADE BY CODE

PART IV - REPRESENTATIO NS AND INSTRUCTIO NS

PART III - LIST O F DO CUMENTS, EXHIBITS AND O THER ATTACHMENTS

26 - 49

PART II - CO NTRACT CLAUSES

NAVSUP WEAPON SYSTEMS SUPPORT

TANIA HOCKENBERRY, CODE N742.17

5450 CARLISLE PIKE

P.O. BOX 2020

MECHANICSBURG PA 17055

717-605-7863

717-605-2807FAX:

TEL:

FAX:

TEL:

NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid" and "bidder".

SOLICITATION

6. REQUISITION/PURCHASE NO.

N0010417NB092

5. DATE ISSUED

22 May 2017

4. TYPE OF SOLICITATION

SEALED BID (IFB)

NEGOTIATED (RFP)

[ X ]

3. SOLICITATION NO.

N0010417RK086

Section B - Supplies or Services and Prices

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

DODIC: DWGS

FFP

Nomenclature: Cable Cutter Assembly

NSN 1377-01-512-5829 / 1377-01-620-6487

NSN: 1377-01-512-5829

PURCHASE REQUEST NUMBER: N0010417NB092

NET AMT

0001AA 1 Set

TECHNICAL DATA

FFP

See DD Form 1423, Exhibit A

FOB: Destination

0001AB 11 Each

DWGS - CABLE CUTTER ASSEMBLY

FFP

FMS CASE: CO-D-CBM

REQN: DCOA94-4169-7901

MIPR: F2DCDE5240G001/001

Ownership Code: 8

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Origin (Shipping Point)

0001AC 10 Each

DWGS - CABLE CUTTER ASSEMBLY

FFP

FMS CASE: CO-D-CBK

REQN: DCOA94-5117-7905

MIPR: F2DCDE5240G001/002

Ownership Code: 8

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Origin (Shipping Point)

0001AD 5 Each

DWGS - CABLE CUTTER ASSEMBLY

FFP

FMS CASE: EG-D-CAA

REQN: DEG24N-5096-5076

MIPR: F2DCDE5240G001/003

Ownership Code: 8

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Origin (Shipping Point)

0001AE 10 Each

DWGS - CABLE CUTTER ASSEMBLY

FFP

FMS CASE: EG-D-SAB

REQN: DEG28N-5069-5069

MIPR: F2DCDE5240G001/004

Ownership Code: 8

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Origin (Shipping Point)

0001AF 4 Each

DWGS - CABLE CUTTER ASSEMBLY

FFP

FMS CASE: MO-D-CBM

REQN: DMOB84-4204-5001

MIPR: F2DCDE5240G001/005

Ownership Code: 8

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Origin (Shipping Point)

0001AG 4 Each

DWGS - CABLE CUTTER ASSEMBLY

FFP

FMS CASE: MO-D-CBM

REQN: DMOC84-5203-5000

MIPR: F2DCDE5240G001/006

Ownership Code: 8

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Origin (Shipping Point)

0001AH 16 Each

DWGS - CABLE CUTTER ASSEMBLY

FFP

FMS CASE: TH-D-CAX

REQN: DTH484-5068-7613

MIPR: F2DCDE5240G001/007

Ownership Code: 8

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Origin (Shipping Point)

0001AJ 10 Each

DWGS - CABLE CUTTER ASSEMBLY

FFP

FMS CASE: SR-D-CCZ

REQN: DSRJ84-6088-5330

MIPR: F2DCDE6217G101/001

Ownership Code: 8

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Origin (Shipping Point)

SECTION B NOTES

SOLICITATION NOTES:

1. Faxed offers will NOT be accepted.

2. Since the Government intends to award without discussion, any exceptions to the requirements of this solicitation should be raised prior to submission of an offer.

3. This item is a CSI – Critical Safety Item.

4. All contractual documents (i.e. contracts, purchase orders, task orders, delivery orders and modifications) related to the instant procurement are considered to be "issued" by the

Government when copies are either deposited in the mail, transmitted by facsimile, or sent by other electronic commerce methods, such as email. The Government's acceptance of the contractor's proposal constitutes bilateral agreement to "issue" contractual documents as detailed herein.

5. Electronic submission of an offer may be accomplished by attaching your offer to an email directed to tania.hockenberry@navy.mil. The size limitation of an email through the NAVSUP

WSS mail server is 10 MB. All files designated as .zip files will be stripped from any email sent.

Files larger than the server limitation may be segregated and sent via several emails as long as they are clearly identified as such.

mailto:x.x@navy.mil

Section C - Descriptions and Specifications

SECTION C

SECTION C – DESCRIPTION AND SPECIFICATIONS (MAY 2005)

NOTE 1: NON-ANTICIPATION OF INITIAL DEVIATIONS ON AWARDS

Offerors are reminded that any resultant contract will require performance in strict compliance with the specifications set forth therein, and that prices offered should not be predicated upon Contractor anticipation of

Government authorization of deviations, even though such deviations may have been granted previously under other contracts for the same item.

NOTE 2: SPECIFICATIONS THAT DO NOT INDICATE SPECIFIC REVISION LEVELS ARE TO BE

MADE TO THE REVISION LEVELS LISTED ON THE DODISS IN EFFECT AT THE TIME OF

SOLICITATION ISSUANCE.

NOTE 3: The TDP/Drawings (Drawings/Specifications), if required, can be downloaded by selecting the “FBO

Documents Link” on the NECO site for the particular solicitation. Or use the following link: https://www.fbo.gov

1. DATA LIST / PART NUMBERS / DRAWING NUMBERS:

CLIN DATA LIST / PART OR DRAWING NUMBERS REVISION REVISION DATE

0001 P/N 42305-160 - -

0001 DWG 303104-3 - -

2. For Contractor part number, Contractor SHALL submit Product Baseline in accordance with DD1423, sequence number A001.

SECTION C – CONFIGURATION CONTROL: ANSI/EIA-649 (NAVY STOCK CLASS 1377)

(APR 2013)

1. Configuration Control - The Contractor shall maintain the total equipment baseline configuration. For items of proprietary design, Contractor drawings showing the latest assembly configuration shall be provided to the

Government in electronic format.

2. Variances – Requests for Variance (RFV) - RFVs shall be designated as Critical, Major, or Minor. RFVs shall be in Contractor format and shall include information outlined in ANSI/EIA-649 section 5.3.4.1 and SAE-EIA-649-1 section 3.3.2. DD Form 1694-MAR 2013 is the preferred format for RFV submissions.

Note: A copy of the preferred RFV Form DD Form 1694 MAR 2013 is available at:

http://www.dtic.mil/whs/directives/forms/dd/ddforms1500-1999.htm

The Contractor's assigned RFV number shall use the following numbering format:

a. The last four alpha-numeric characters of the contract number followed by a dash (-).

b. The letter "V", followed by consecutively assigned numeric characters beginning with 001.

Definitions: (See ANSI/EIA 649 and MIL-HDBK-61A for additional guidance on critical, major and minor classifications.)

Critical: Critical variances impact safety, health, or environment. A departure from a requirement classified as critical in configuration documentation.

Major: Major variances have significant impacts such as performance or operational limits, structural strength, or qualification characteristics and may impose limits on product use or operation or cause temporary use of alternate items. A departure from a requirement classified as major in configuration documentation.

Minor: Minor variances have little or no impact and are generally associated with non-functional factory defects that can be dispositioned locally as: “use as is” or “after suitable repair.” A departure from a requirement classified as minor in configuration documentation.

3. Engineering Change Proposal (ECP) - The Government will maintain configuration control and change authority for all modifications or changes affecting form, fit, function, or interface parameters of the Equipment and its sub-assemblies. ECPs shall be designated as Major (Class I) or Minor (Class II). ECPs shall be prepared in Contractor format and shall include information outlined in ANSI/EIA-649 section 5.3.1.4. The use of DD Form 1692 is acceptable form for ECP submissions. MIL-HDBK-61 provides additional guidance for preparation of ECPs.

The Contractor's assigned ECP number shall use the following numbering format:

a. The last four alpha-numeric characters of the contract number followed by a dash (-).

https://www.fbo.gov/ http://www.dtic.mil/whs/directives/forms/dd/ddforms1500-1999.htm

b. The letters "ECP", followed by consecutively assigned numeric characters beginning with 001.

Definitions: (See ANSI/EIA 649 and MIL-HDBK-61A for additional guidance on Major (Class I) and Minor (Class

II) classifications.)

Major (Class I):

a. A change that affects specified and approved requirements for product attributes, including safety, reliability, and supportability.

b. A change, after establishment of the product baseline, that affects compatibility with interfacing products, including such products as test equipment, support equipment, software, and products furnished by a customer or that affects one or more of the following::

- required calibration to the extent that product identification should be changed

- interchangeability or substitutability of replaceable products, assemblies, or components

- change to add a previously non-qualified supplier, where supplier selection is specified

- requires retrofit of delivered products

Minor(Class II): Affects configuration documentation (released design information), product or processes but does not affect Major Change Criteria.

4. ECP changes to Contractor drawings: Minor (Class II) ECP change authority for Contractor drawings is granted provided there is no change to form, fit or function, as defined herein. Changes to form, fit, or function are Major

(Class I) ECP changes and shall be approved by the Navy CCB and technical approval authority prior to implementation. Minor ECP change documentation shall be provided to the Navy technical approval authority for concurrence after Contractor approval. Contractors may use their own numbering format for ECP changes to

Contractor drawings.

Definitions:

Form: the shape, external size, and marking which uniquely characterizes an item.

Fit: the ability of an item to physically interface or interconnect with and become an integral part of a higher level assembly.

Function: the action[s] that an item is designed to perform including performance, durability and safety.

The following are examples of Major (Class I) changes with regard to function

a. Change to energetic material

b. Change to component material or material properties

c. Change to electrical characteristics.

d. Change in ballistic performance.

If the Navy technical approval authority does not concur with the ECP submitted by the Contractor, then the

Contractor is required to revert to the Government approved revision of the drawing per the approved product baseline or to the revision used in the prior lot accepted by the Government. If the Contractor wishes to continue production of the item with the unapproved drawing, then the Government reserves the right to invoke First Article

Testing (FAT) per paragraph 2 of “Section E-CAD/PAD Inspection and Acceptance”, or require the Contractor to undergo qualification testing.

5. The Contractor shall submit an electronic copy of any ECP or RFV to the Contracting Officer, Local DCMA

QAR, and the technical activity below:

a. Local DCMA QAR

b. NAVSUP WSS Contracting Officer

c. NSWC IHEODTD CAD/PAD Department Acquisition Management Specialist (AMS)

6. Technical approval authority for RFVs and ECPs is NSWC IHEODTD, Lead CAD/PAD Engineer, Code E2CE.

7. Final approval of any ECP and/or RFV shall be in writing, by the Contracting Officer, NAVSUP Weapon

Systems Support.

8. Authorization to accept non-conforming supplies is specifically retained by the Contracting Officer.

SECTION C - IDENTIFICATION OF COVERED DEFENSE INFORMATION (252.204-7012) (MAY

2016)

1. In accordance with the DFARS clause at 252.204-7012, Safeguarding Covered Defense Information and Cyber

Incident Reporting, the Contractor shall provide adequate security for all government and contractor owned

Technical Data Packages (TDPs), drawings and item detail specifications on all covered defense information systems that support the performance of work under this contract.

CLAUSES INCORPORATED BY REFERENCE

252.211-7005 Substitutions for Military or Federal Specifications and

Standards

NOV 2005

Section D - Packaging and Marking

SECTION D

SECTION D – UID CAD/PAD ITEM MARKING INFORMATION

The Attachment “CAD/PAD Item Marking Instruction Version 1.2”, prepared by the CAD/PAD Joint Program

Office 784 CBSG/GJ Code E25MA, NSWC IHEODTD Indian Head to include sample data in incorporated by reference with the same force and effect as if contained herein.

SECTION D – PACKING, MARKING, AND TRANSPORTATION (MAY 2016)

1. Preservation, packaging, packing, and marking shall be in accordance with MIL-STD-129, MIL-STD-2073, CFR

49 171-178, MIL-STD-1320 and DLAR 4145.41.

2. Packaging and packing for production lots, first article samples and lot acceptance samples shall be IAW the following by item:

CLIN QUP IAW

0001 1 EA Level A packaging (Commercial Pack). The degree of preservation and packaging which will afford adequate protection against corrosion, deterioration and physical damage during shipment, handling, indeterminate storage and worldwide redistribution.

3. Labels for Human Readable Information (HRI) and Machine Readable Information (MRI) shall meet the requirements for a Grade A, Style 2, Composition (b) label as specified in MIL-PRF-61002. The performance requirements for solvent and detergent resistance are not required. The label should be the pressure sensitive adhesive type.

4. Human Readable Information (HRI) markings shall be applied to ammunition, explosives containers and units loads IAW the applicable provisions of MIL-STD-129.

a. At a minimum, inner container markings for CLIN 0001 shall include:

National Stock Number and (DoD) Code: (see Section “B” for applicable CLIN)

Item Nomenclature: (see Section “B” for applicable CLIN)

Item Assembly Drawing Number: (see Section “B” for applicable CLIN)

Quantity: As Applicable

Lot Number: IAW MIL-STD-1168

Serial Number: Required ( x ) N/A ( )

b. At a minimum, outer container markings for CLIN 0001 shall include:

National Stock Number and (DoD) Code: (see Section “B” for applicable CLIN)

Item Nomenclature: (see section “B” for applicable CLIN)

Item Assembly Drawing Number: (see Section “B” for applicable CLIN)

Quantity: As Applicable

Lot Number: IAW MIL-STD-1168

Serial Number: Required ( x) N/A ( )

Gross Weight and Cube: As Applicable

DoD Contract Number: As Applicable

POP Markings: (see Section “D” – Packaging & Marking paragraph 3 – below.)

UN Proper Shipping Name, UN Number, Hazard Class, Compatibility Code, Net Explosive Weight, and EX

Number: (see TABLE 1 below for applicable CLIN)

CAA: USG DOT 'EX NUMBER'

(see TABLE 1 EX NUMBER COLUMN below for applicable CLIN ) Example CAA: USG DOT 880832

5. Machine Readable Information (MRI) markings shall be applied to ammunition, explosive containers and unit loads IAW the following coded elements of data from MIL-STD-129. MRI labels shall able to be read and interpreted by automatic bar code reading devices (scanners). MRI markings shall contain the minimum data elements identified below:

a. Inner container:

(N) National Stock Number: (see Section “B” for applicable CLIN)

(4R) Department of Defense identification code (DODIC): (see Section “B” for applicable CLIN)

(1P) Item Assembly Drawing Number: (see Section “B” for applicable CLIN)

(1T) Lot Number: IAW MIL-STD-1168

(S) Serial Number: Required ( x) N/A ( )

b. Outer container:

(N) National Stock Number: (see Section “B” for applicable CLIN)

(4R) Department of Defense identification code (DODIC): (see Section “B” for applicable CLIN)

(1P) Item Assembly Drawing Number: (see Section “B” for applicable CLIN)

(7Q) Quantity: As Applicable

(1T) Lot Number: IAW MIL-STD-1168

(S) Serial Number: Required ( x) N/A ( )

NOTE: The parenthesis surrounding the data elements are NOT encoded in the 2D(PDF417) bar code.

6. Traceable Seals for shipping containers:

a. Traceable seals are required for delivery of all "ready to issue" (condition code A, B, C, or N) or "pending acceptance" (condition code D) ammunition and ordnance items, including inert configuration items.

Traceable seals provide an indication of security and certification of material serviceability and apply to more than just hazardous materials.

b. The Contractor shall ensure traceable seals are properly affixed in accordance with these requirements:

1. Traceable seals are applied to each shipping and storage container at the time of packaging. The shipping container will normally be the outer container.

2. WIRE SEALS: A wire seal is a wire length with an aluminum disk or pellet which is crimped or crushed using a die which imprints a “U.S.” symbol on the disk/pellet. Wire seals are applied to containers having provisions or means for application of wire seals, e.g., metal containers, drums, or cradles and wood boxes with hinged covers and/or latches.

3. LABEL SEALS: A label seal is a nonmetallic label with a pressure sensitive backing and which is printed or stamped with a “U.S” symbol. Label seals are applied to containers which do not have provisions or means for application of wire seals, e.g., fiberboard or wood boxes without hasps or latches.

4. Label seals shall be applied such that the label must be cut or defaced in order to open a container.

Adhesives shall adhere well enough to prevent peeling during shipping conditions and well enough to prevent lifting and replacement of the label. Particular consideration shall be given to label seals required to adhere to wood and fiberboard surfaces.

7. Restrictions Involving Non-Manufactured Wood Packaging (NMWP) and Pallets (per Defense Logistics Agency

Directive subpart 47.305-1(c)(90): “All wooden pallets and wood containers produced of non-manufactured wood shall be constructed from Heat Treated (HT to 56 degrees Centigrade for 30 minutes) material and certified by an accredited agency recognized by the American Lumber Standards Committee (ALSC) in accordance with Non-manufactured Wood Packing Policy and Non-manufactured Wood Packing Enforcement Regulations, both dated

May 30, 2001.”

SECTION D – AMMUNITION LOT NUMBERING: MIL-STD-1168 (MAY 2015)

Ammunition lot numbering shall be in accordance with MIL-STD-1168 (and MIL-DTL-85097 for Propellant

Actuated Devices). The applicable lot interfix series number will be furnished in the signed contract.

*Lot number formulation shall consist of the following:

a. The Contractor symbol: Only approved symbol is to be used. Requests for approval of marking symbol are to be submitted via the Government Inspector. Refer to MIL-HDBK-1461 for guidance, which is available on the WARP Website.

b. The year and the alpha code designating the month in which final assembly for end item of the representative lot begins.

c. The assigned lot interfix number.

d. The sequence number shall be consecutive for each production lot manufactured under this contract.

e. Serialization of sub-assembly or end item under this contract shall meet the requirements of MIL-STD-1168.

Serial numbers Shall Not be repeated on the same part numbered item regardless of changes in lot numbers.

Ammunition Lot number designation Sample:

IHM 93 D 002 - 007

a b c D e

KEY:

a Manufacturer’s Identification Code.

b The year of manufacture of the oldest batch of propellant in the lot.

c The month of manufacture of the oldest batch of propellant in the lot expressed as an alpha code in accordance with 4.1.3 of MIL-STD-1168 d Lot interfix number – lot number (provided and controlled by NSWC IHEODTD AMS).

E Lot sequence number – lot number (manufacturer responsible for the assignment of lot numbers).

Section E - Inspection and Acceptance

SECTION E

SECTION E – CAD/PAD INSPECTION AND ACCEPTANCE (MAY 2015)

1. The Contractor shall provide and maintain a quality program acceptable to the Government and modeled on ISO

9001:2008 with Technical Corrigendum 1or an equivalent quality system. If the quality program is not modeled on

ISO 9001:2008 with Technical Corrigendum 1 the offeror/prospective Contractor shall indicate the quality system proposed along with how it is equivalent, under separate letter submitted with the offer/proposal.

ISO 9001:2008 Other

This quality system along with program specific production documentation shall be made available for review by the Government’s representative upon request, at the Contractor’s facility at no cost to the Government.

2. Due to the critical nature and safety application of these items, the Contractor and the QAR are cautioned that it is mandatory to ensure the correct identification and nomenclature are assigned for all items and shipping containers prior to shipment including CAGE codes. CAD/PAD Devices are exempt from MIL-STD-129 shelf life markings on packaging; however, they shall have a minimum of 85% of the shelf life remaining at time of delivery. Any delivery from a contractor not having at least 85% shelf-life remaining shall normally be considered non-conforming.

NOTE: The shelf life for CLIN 0001 is: 12 years and 0 months.

3. An Incoming Inspection Summary Report shall be submitted under this contract for all production lot and/or first article hardware. The report shall contain all metal parts inspection records such as dimensional verification and all certificate of conformance as required to verify the parts meet the technical drawing package and specification requirements. Copies are to be submitted to the government concurrent with delivery of production lot or first article test samples. Delivery in accordance with Contract Data Requirement List (CDRL) DD Form 1423, sequence number A002.

52.246-2 Inspection Of Supplies--Fixed Price AUG 1996

52.246-16 Responsibility For Supplies APR 1984

CLAUSES INCORPORATED BY FULL TEXT

52.246-11 HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (DEC 2014)

(a) The Contractor shall comply with the higher-level quality standard(s) listed below.

ISO-9001:2008

(b) The Contractor shall include applicable requirements of the higher-level quality standard(s) listed in paragraph

(a) of this clause and the requirement to flow down such standards, as applicable, to lower-tier subcontracts, in--

(1) Any subcontract for critical and complex items (see 46.203(b) and (c)); or

(2) When the technical requirements of a subcontract require--

(i) Control of such things as design, work operations, in-process control, testing, and inspection; or

(ii) Attention to such factors as organization, planning, work instructions, documentation control, and advanced metrology.

(End of clause)

Supplies furnished hereunder Shall be: Inspected at (X) Contractor's and/or Subcontractor's plant or ( )

Destination.

Acceptance Shall be: at (X) Contractor's and/or Subcontractor's plant or ( ) Destination.

If supplies will be packaged at a location different from the offeror address indicated on the solicitation, the offeror shall provide the name and street address of the packaging location:

Packaging House

Address

Section F - Deliveries or Performance

SECTION F

SECTION F – DELIVERIES OR PERFORMANCE (MAY 2013)

Unless otherwise indicated in this contract, accelerated delivery is desirable and acceptable. The addresses for the activities designated to receive supplies are listed below:

LINE / SUBLINE ITEM

AND QTY SHIP TO: MARK FOR:

0001AB 11 EA SUPP ADDRESS: DXXCBM

MAPAC: DCOA00

Priority: 02

MAPAC: DCOA00

FMS CASE: CO-D-CBM

REQN #: DCOA94-4169-7901

MIPR: F2DCDE5240G001/001

0001AC 10 EA SUPP ADDRESS: DXXCBK

MAPAC: DCOA00

Priority: 03

MAPAC: DCOA00

FMS CASE: CO-D-CBK

REQN #: DCOA94-5117-7905

MIPR: F2DCDE5240G001/002

0001AD 5 EA SUPP ADDRESS: DA5CAA

MAPAC: DEG200

Priority: 03

MAPAC: DEG200

FMS CASE: EG-D-CAA

REQN #: DEG24N-5096-5076

MIPR: F2DCDE5240G001/003

0001AE 10 EA SUPP ADDRESS: DZ5SAB

MAPAC: DEG200

Priority: 03

MAPAC: DEG200

FMS CASE: EG-D-SAB

REQN #: DEG28N-5069-5069

MIPR: F2DCDE5240G001/004

0001AF 4 EA SUPP ADDRESS: FV2172

MAPAC: 09 ACCOUNT

Priority: 03

MAPAC: 09 ACCOUNT

FMS CASE: MO-D-CBM

REQN #: DMOB84-4204-5001

MIPR: F2DCDE5240G001/005

0001AG 4 EA SUPP ADDRESS: DZ3CBM

MAPAC: DMOC00

Priority: 06

MAPAC: DMOC00

FMS CASE: MO-D-CBM

REQN #: DMOC84-5203-5000

MIPR: F2DCDE5240G001/006

0001AH 16 EA SUPP ADDRESS: DZ4CAX

MAPAC: DTH400

Priority: 06

MAPAC: DTH400

FMS CASE: TH-D-CAX

REQN #: DTH484-5068-7613

MIPR: F2DCDE5240G001/007

0001AJ 10 EA SUPP ADDRESS: DZ4CCZ

MAPAC: DSRJ00

Priority: 12

MAPAC: DSRJ00

FMS CASE: SR-D-CCZ

REQN #: DSRJ84-6088-5330

MIPR: F2DCDE6217G101/001

NOTE: The above Mark For information is to be noted on the WAWF-RR for each applicable subline item.

CAD/PAD ADDITIONAL NOTES:

a. A WAWF-RR shall be furnished for each lot of test samples shipped.

b. The following data shall be furnished on the WAWF-RR shipping document.

1. Lot Number

2. Lot Size Total (consists of net, test and investigative)

3. Net quantity shipped to consignee

a. Item quantity shipped to consignee

b. Total item quantity shipped to consignee

c. Item quantity due consignee

d. GBL and method of shipment

4. Test units - lot size represented by number of test units forwarded for test. (Total test units equals test samples plus investigative or retained samples.)

5. The WAWF-RR shall be marked as applicable, i.e., "First Article Test Sample," "Lot Acceptance Test

Sample," "Production M/F Stock and Issue" and/or other mark for (M/F) instructions contained in this section.

SECTION F – REPORT OF SHIPMENT (MAR 2016)

The Contractor shall provide an advanced Report of Shipment (REPSHIP) per clause 52.247-68 to the AMS listed in

Section G no later than 24 hours prior to the shipment arrival, and for ammunition shipments no later than two hours after shipment departure. Failure to provide a REPSHIP can result in shipments being denied at point of disembarkation and returned to the point of embarkation for reshipment at the contractor’s expense. A REPSHIP can be in the contractor’s format but shall include at a minimum all the following data:

REPSHIP Data Requirements for Individual Shipments of Hazardous Material (HAZMAT) and Inert Component

Parts - Continental United States (CONUS) to CONUS, CONUS to Overseas or From All Overseas Locations

FROM: Shipping Activity

To: IHEODTD AMS (See Section H)

SUBJ: Report of Shipment (REPSHIP)

1. Shipment Date written as a three-digit day of the year (Julian)

2. Estimated Time of Arrival (ETA) written as a three-digit day of the year (Julian) (Observe Standard Transit

Time (STT), if CONUS Truck Shipment and no Required Delivery Date (RDD) identified)

3. Required Delivery Date (RDD) or Delivery Date (DD), if specified

4. Carrier

5. Bill of Lading (BL) Number (Notes 1, 2, 3, 4)

6. Military Traffic Expediting-Greater Security (MTX-GS) Service Number (Notes 1, 2, 3)

7. Air Release Number (Notes 1, 2, 3) or for Surface Shipments, Export Traffic Release (ETR) Number and

Vessel Name and/or Voyage Document Number

8. Shipment (Cargo) Name (Example: Bombs)

9. Container and Seal Number (if applicable):

a. Container Transportation Control Number (TCN)

b. Total Weight of Contents

c. Rounds, Pieces, Weight, Cube, Condition code, and Lot Numbers (Note 4)

10. Security Risk Category (SRC), (E.G., Security Risk Category I, II, III, IV, Unclassified, Confidential, Secret, None)

11. Controlled Item Inventory Code (CIIC)

12. Total Net Explosive Weight (NEW)

13. Hazard Classification (s)

14. Department of Defense Identification Code / Navy Ammunition Logistic Code (DODIC/NALC). (Note 4).

15. Name, address, and phone number of person responsible for information contained in REPSHIP

NOTES:

1. When the conveyance contains more than one shipment unit, repeat the data elements in separately lettered paragraphs for each shipment unit.

2. Cargo for more than one vessel or flight, but shipped to Port of Embarkation (POE) in a single conveyance, is included in a single REPSHIP. When cargo for a single vessel is moved to the Seaport of Embarkation (SPOE) in more than one conveyance, repeat all the data elements as above in separate numbered paragraphs for each conveyance or REPSHIP.

3. A separate REPSHIP is used for each mode of shipment to the POE.

4. Lot number, DODIC and NALC are not mandatory fields. If available, they may be provided in the electronic

RESHIP or in the template above. If a CBL is used, the lot number and ammunition condition code should be included in the remarks section. Weapons must be identified on the CBL by each serial number contained within the shipment.

5. DODIC and NALC are codes used specifically for logistic administration and control of ammunition.

SECTION F – FOREIGN MILITARY SALES (FMS) SHIPMENTS (FEB 2006)

The Cognizant DCMA Transportation Office shall forward copies of the Notice of Availability for all FMS shipments to the activities listed below:

COMMANDER NSWC IHEODTD FAX: 301-744-6699 ATTN: CODE: AMS Per Section H

COMMANDER OGDEN ALC FAX: 801-777-5545 ATTN: CODE: 84 MSUG / GBMUM

52.242-15 Stop-Work Order AUG 1989

52.242-17 Government Delay Of Work APR 1984

52.247-29 F.O.B. Origin FEB 2006

52.247-30 F.O.B. Origin, Contractor's Facility FEB 2006

52.247-34 F.O.B. Destination NOV 1991

52.247-52 Clearance and Documentation Requirements-Shipments to

DOD Air or Water Terminal Transshipment Points

FEB 2006

52.247-58 Loading, Blocking, And Bracing Of Freight Car Shipment APR 1984

52.247-59 F.O.B Origin--Carload and Truckload Shipments APR 1984

252.223-7003 Changes In Place Of Performance--Ammunition And

Explosives

DEC 1991

252.247-7023 Transportation of Supplies by Sea APR 2014

252.247-7028 Application for U.S. Government Shipping

Documentation/Instructions

JUN 2012

52.211-8 TIME OF DELIVERY (JUN 1997)

(a) The Government requires delivery to be made according to the following schedule:

REQUIRED DELIVERY SCHEDULE

Item Quantity Days

A001 (Product Baseline) - 90 DADC

A002 (Incoming Inspection Report) - 240 DADC

0001AB 11 EA 240 DADC

0001AC 10 EA 240 DADC

0001AD 5 EA 240 DADC

0001AE 10 EA 240 DADC

0001AF 4 EA 240 DADC

0001AG 4 EA 240 DADC

0001AH 16 EA 240 DADC

0001AJ 10 EA 240 DADC

KEY:

DADC = Days after Date of Contract

The Government will evaluate equally, as regards time of delivery, offers that propose delivery of each quantity within the applicable delivery period specified above. Offers that propose delivery that will not clearly fall within the applicable required delivery period specified above, will be considered nonresponsive and rejected. The

Government reserves the right to award under either the required delivery schedule or the proposed delivery schedule, when an offeror offers an earlier delivery schedule than required above. If the offeror proposes no other delivery schedule, the required delivery schedule above will apply.

OFFEROR'S PROPOSED DELIVERY SCHEDULE

Item Quantity Days

A001 (Product Baseline) -

A002 (Incoming Inspection Report) -

0001AB 11 EA

0001AC 10 EA

0001AD 5 EA

0001AE 10 EA

0001AF 4 EA

0001AG 4 EA

0001AH 16 EA

0001AJ 10 EA

(b) Attention is directed to the Contract Award provision of the solicitation that provides that a written award or acceptance of offer mailed, or otherwise furnished to the successful offeror, results in a binding contract. The

Government will mail or otherwise furnish to the offeror an award or notice of award not later than the day award is dated. Therefore, the offeror should compute the time available for performance beginning with the actual date of award, rather than the date the written notice of award is received from the Contracting Officer through the ordinary mails. However, the Government will evaluate an offer that proposes delivery based on the Contractor's date of receipt of the contract or notice of award by adding (1) five calendar days for delivery of the award through the ordinary mails, or (2) one working day if the solicitation states that the contract or notice of award will be transmitted electronically. (The term "working day" excludes weekends and U.S. Federal holidays.) If, as so computed, the offered delivery date is later than the required delivery date, the offer will be considered nonresponsive and rejected.

Section G - Contract Administration Data

SECTION G

SECTION G – ACCOUNTING DATA

Accounting data will be cited at time of award.

252.232-7003 Electronic Submission of Payment Requests and Receiving

Reports

JUN 2012

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (MAY 2013)

(a) Definitions. As used in this clause--

Department of Defense Activity Address Code (DoDAAC) is a six position code that uniquely identifies a unit, activity, or organization.

Document type means the type of payment request or receiving report available for creation in Wide Area

WorkFlow (WAWF).

Local processing office (LPO) is the office responsible for payment certification when payment certification is done external to the entitlement system.

(b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall--

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.acquisition.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this Web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training

Course and use the Practice Training Site before submitting payment requests through

WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/.

(e) WAWF methods of document submission. Document submissions may be via Web entry, Electronic Data

Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order:

(1) Document type. The Contractor shall use the following document type(s).

(Contracting Officer: Insert applicable document type(s). Note: If a “Combo” document type is identified but not supportable by the Contractor's business systems, an “Invoice” (stand-alone) and

“Receiving Report” (stand-alone) document type may be used instead.)

(2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in

WAWF, as specified by the contracting officer.

(Contracting Officer: Insert inspection and acceptance locations or “Not applicable”.)

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF

Pay Official DoDAAC ____

Issue By DoDAAC ____

Admin DoDAAC ____

Inspect By DoDAAC ____

Ship To Code ____

Ship From Code ____

Mark For Code ____

Service Approver (DoDAAC) ____

Service Acceptor (DoDAAC) ____

Accept at Other DoDAAC ____

LPO DoDAAC ____

DCAA Auditor DoDAAC ____

Other DoDAAC(s) ____

(*Contracting Officer: Insert applicable DoDAAC information or “See schedule” if multiple ship to/acceptance locations apply, or “Not applicable.”)

(4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g. timesheets) in support of each payment request.

(5) WAWF email notifications. The Contractor shall enter the email address identified below in the “Send

Additional Email Notifications” field of WAWF once a document is submitted in the system.

(Contracting Officer: Insert applicable email addresses or “Not applicable.”)

(g) WAWF point of contact. (1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

(Contracting Officer: Insert applicable information or “Not applicable.”)

(2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988.

Section H - Special Contract Requirements

SECTION H

SECTION H – ADMINISTRATIVE POINTS OF CONTACT (MARCH 2016)

1) Inquiries and correspondence directed to the Procuring Contracting Officer (PCO) should be addressed as follows:

Name: Tania Hockenberr y Code: N742.17

Phone: 717-605-7863 Email: tania.hockenberry@navy.mil

2) Inquiries and correspondence directed to the Acquisition Management Specialist (AMS) should be addressed as follows:

Name: Jamea Peterson Code: E21JP

Phone: 301-744-2221 Email: jamea.peterson@navy.mil

3) If the inquiry involves technical questions, (drawing, specifications, etc.) inquiry should be submitted in accordance with the procurement specification. All telephone inquiries pertaining to technical questions must be confirmed in writing with the above AMS and PCO within 48 hours.

SECTION H – SPECIAL DISTRIBUTION (MAY 2007)

NOTE 1: Use of the Wide Area Work Flow Receipt and Acceptance (WAWF-RR) electronic form is required. See clause 252.246-7000 Material Inspection and Receiving Report (March 2003) and 252.232-7003 Electronics

Submission of Payment Requests and Receiving Reports (MAR 2008).

NOTE 2: When using WAWF-RR to submit Contract Data Requirements List (CDRL) data and “Not Separately

Priced” items, the following information shall be listed in the “Comments” field of the WAWF electronic form:

Shipping company, shipment tracking number, and date shipped.

WAWF-RR documents accompanying the shipment are to be attached as follows (Type of Shipment - Location):

Carload or truckload - Affix to the shipment where it will be readily visible and available upon request.

Less than carload or truckload - Affix to container number one or container bearing lowest number.

Mail, including parcel post - Attach to outside or include in the package. Include a copy in each additional package of multi-package shipments.

SECTION H – SPECIAL DISTRIBUTION (MAY 2007)

KEY: * = Hard Copy ** = Provisional for LATs Only S = Include all other shipping documents

ADC iRAPT GBL

DESIGNATOR /

CLIN

DESIGNEE and E-Mail Addresses

1* 1 0001 CONSIGNEE

1* 1 S 0001 CONTRACT ADMINISTRATION OFFICE (DCMA)

1* 1 S 0001

GOVERNMENT QUALITY ASSURANCE

REPRESENTATIVE

1* 1 S 0001

TRANSPORTATION OFFICE ISSUING GBL (ATTACH TO

GBL MEMORANDUM COPY)

NSWC IHEODTD

CAD/PAD DEPARTMENT BLDG 1557

4393 BENSON ROAD

INDIAN HEAD MD 20640-5092

1* 1 S 0001 Code: AMS per Section H

1* 0001 Code: E26 nswc_iheodtd_dmo@navy.mil

COMMANDER

NAVSUP WEAPON SYSTEMS SUPPORT

5450 CARLISLE PIKE PO BOX 2020 BLDG 410

MECHANICSBURG PA 17055-0788

1 0001 ATTN: Contracting Officer per Section H

ADC iRAPT GBL

DESIGNATOR /

CLIN

DESIGNEE and E-Mail Addresses

COMMANDER

US ARMY MUNITIONS & ARMAMENTS COMMAND

ROCK ISLAND IL 61299-6000

1* 0001 ATTN: AMSOS-PBQ Annemarie.gephart@us.army.mil mailto:Annemarie.gephart@us.army.mil

SECTION H – MAINTENANCE OF DATA (MAY 2015)

The Contractor SHALL maintain all Lot related Data, for a period of twenty (20) years, unless disposal is approved in writing by NSWC IHEODTD, AMS.

Section I - Contract Clauses

52.202-1 Definitions NOV 2013

52.203-3 Gratuities APR 1984

52.203-5 Covenant Against Contingent Fees MAY 2014

52.203-6 Restrictions On Subcontractor Sales To The Government SEP 2006

52.203-7 Anti-Kickback Procedures MAY 2014

52.203-8 Cancellation, Rescission, and Recovery of Funds for Illegal or

Improper Activity

MAY 2014

52.203-10 Price Or Fee Adjustment For Illegal Or Improper Activity MAY 2014

52.203-12 Limitation On Payments To Influence Certain Federal

Transactions

OCT 2010

52.203-17 Contractor Employee Whistleblower Rights and Requirement

To Inform Employees of Whistleblower Rights

APR 2014

52.203-18 Prohibition on Contracting With Entities That Require Certain

Internal Confidentiality Agreements or Statements--

Representation

JAN 2017

52.204-2 Security Requirements AUG 1996

52.204-4 Printed or Copied Double-Sided on Postconsumer Fiber

Content Paper

MAY 2011

52.204-10 Reporting Executive Compensation and First-Tier

Subcontract Awards

OCT 2016

52.204-13 System for Award Management Maintenance OCT 2016

52.204-18 Commercial and Government Entity Code Maintenance JUL 2016

52.204-19 Incorporation by Reference of Representations and

Certifications.

DEC 2014

52.209-6 Protecting the Government's Interest When Subcontracting

With Contractors Debarred, Suspended, or Proposed for

Debarment

OCT 2015

52.209-10 Prohibition on Contracting With Inverted Domestic

Corporations

NOV 2015

52.211-5 Material Requirements AUG 2000

52.211-15 Defense Priority And Allocation Requirements APR 2008

52.215-2 Audit and Records--Negotiation OCT 2010

52.215-8 Order of Precedence--Uniform Contract Format OCT 1997

52.215-14 Integrity of Unit Prices OCT 2010

52.215-14 Integrity of Unit Prices OCT 2010

52.219-8 Utilization of Small Business Concerns NOV 2016

52.219-8 Utilization of Small Business Concerns NOV 2016

52.219-28 Post-Award Small Business Program Rerepresentation JUL 2013

52.222-1 Notice To The Government Of Labor Disputes FEB 1997

52.222-3 Convict Labor JUN 2003

52.222-4 Contract Work Hours and Safety Standards- Overtime

Compensation

MAY 2014

52.222-4 Contract Work Hours and Safety Standards- Overtime

Compensation

MAY 2014

52.222-19 Child Labor -- Cooperation with Authorities and Remedies OCT 2016

52.222-20 Contracts for Materials, Supplies, Articles, and Equipment

Exceeding $15,000

MAY 2014

52.222-21 Prohibition Of Segregated Facilities APR 2015

52.222-26 Equal Opportunity SEP 2016

52.222-37 Employment Reports on Veterans FEB 2016

52.222-40 Notification of Employee Rights Under the National Labor

Relations Act

DEC 2010

52.222-50 Combating Trafficking in Persons MAR 2015

52.222-54 Employment Eligibility Verification OCT 2015

52.223-6 Drug-Free Workplace MAY 2001

52.223-18 Encouraging Contractor Policies To Ban Text Messaging

While Driving

AUG 2011

52.225-13 Restrictions on Certain Foreign Purchases JUN 2008

52.227-1 Authorization and Consent DEC 2007

52.227-2 Notice And Assistance Regarding Patent And Copyright

Infringement

DEC 2007

52.229-3 Federal, State And Local Taxes FEB 2013

52.232-1 Payments APR 1984

52.232-8 Discounts For Prompt Payment FEB 2002

52.232-11 Extras APR 1984

52.232-17 Interest MAY 2014

52.232-18 Availability Of Funds APR 1984

52.232-23 Assignment Of Claims MAY 2014

52.232-25 Prompt Payment JAN 2017

52.232-33 Payment by Electronic Funds Transfer--System for Award

Management

JUL 2013

52.232-39 Unenforceability of Unauthorized Obligations JUN 2013

52.232-40 Providing Accelerated Payments to Small Business

Subcontractors

DEC 2013

52.233-1 Disputes MAY 2014

52.233-3 Protest After Award AUG 1996

52.233-4 Applicable Law for Breach of Contract Claim OCT 2004

52.242-13 Bankruptcy JUL 1995

52.243-1 Changes--Fixed Price AUG 1987

52.244-5 Competition In Subcontracting DEC 1996

52.244-6 Subcontracts for Commercial Items JAN 2017

52.246-23 Limitation Of Liability FEB 1997

52.247-1 Commercial Bill Of Lading Notations FEB 2006

52.248-1 Value Engineering OCT 2010

52.249-1 Termination For Convenience Of The Government (Fixed

Price) (Short Form)

APR 1984

52.249-2 Termination For Convenience Of The Government (Fixed-

Price)

APR 2012

52.249-8 Default (Fixed-Price Supply & Service) APR 1984

52.253-1 Computer Generated Forms JAN 1991

252.203-7000 Requirements Relating to Compensation of Former DoD

Officials

SEP 2011

252.203-7001 Prohibition On Persons Convicted of Fraud or Other Defense-

Contract-Related Felonies

DEC 2008

252.203-7002 Requirement to Inform Employees of Whistleblower Rights SEP 2013

252.204-7000 Disclosure Of Information OCT 2016

252.204-7002 Payment For Subline Items Not Separately Priced DEC 1991

252.204-7003 Control Of Government Personnel Work Product APR 1992

252.204-7005 Oral Attestation of Security Responsibilities NOV 2001

252.204-7012 Safeguarding Covered Defense Information and Cyber

Incident Reporting

OCT 2016

252.204-7015 Notice of Authorized Disclosure of Information for Litigation

Support

MAY 2016

252.209-7004 Subcontracting With Firms That Are Owned or Controlled By

The Government of a Country that is a State Sponsor of

Terrorism

OCT 2015

252.223-7004 Drug Free Work Force SEP 1988

252.223-7008 Prohibition of Hexavalent Chromium JUN 2013

252.225-7001 Buy American And Balance Of Payments Program-- Basic

(Dec 2016)

DEC 2016

252.225-7002 Qualifying Country Sources As Subcontractors DEC 2016

252.225-7005 Identification Of Expenditures In The United States JUN 2005

252.225-7007 Prohibition on Acquisition of United States Munitions List

Items from Communist Chinese Military Companies

SEP 2006

252.225-7012 Preference For Certain Domestic Commodities DEC 2016

252.225-7016 Restriction On Acquisition Of Ball and Roller Bearings JUN 2011

252.225-7021 Trade Agreements--Basic DEC 2016

252.225-7028 Exclusionary Policies And Practices Of Foreign Government APR 2003

252.225-7048 Export-Controlled Items JUN 2013

252.227-7013 Rights in Technical Data--Noncommercial Items FEB 2014

252.227-7028 Technical Data or Computer Software Previously Delivered to the Government

JUN 1995

252.227-7030 Technical Data--Withholding Of Payment MAR 2000

252.227-7037 Validation of Restrictive Markings on Technical Data SEP 2016

252.232-7010 Levies on Contract Payments DEC 2006

252.243-7001 Pricing Of Contract Modifications DEC 1991

252.243-7002 Requests for Equitable Adjustment DEC 2012

252.244-7000 Subcontracts for Commercial Items JUN 2013

252.246-7000 Material Inspection And Receiving Report MAR 2008

252.246-7001 Alt II Warranty Of Data (Mar 2014) - Alternate II MAR 2014

252.246-7003 Notification of Potential Safety Issues JUN 2013

52.204-21 BASIC SAFEGUARDING OF COVERED CONTRACTOR INFORMATION SYSTEMS (JUN 2016)

Covered contractor information system means an information system that is owned or operated by a contractor that processes, stores, or transmits Federal contract information.

Federal contract information means information, not intended for public release, that is provided by or generated for the Government under a contract to develop or deliver a product or service to the Government, but not including information provided by the Government to the public (such as on public Web sites) or simple transactional information, such as necessary to process payments.

Information means any communication or representation of knowledge such as facts, data, or opinions, in any medium or form, including textual,…