MATERIAL ORDERING DATA.pdf
PDF 100 KB Posted
- Attached to
- STEEL GRIT Federal contract opportunity
- Solicitation number
- SPMYM225Q1630
About this file
This Material Ordering Data document specifies procurement requirements for high-carbon cast-steel grit for the Defense Logistics Agency Maritime Puget Sound. The document details precise technical specifications for 100 drums of G50 grade steel grit, including requirements for hardness (54-61 HRC), durability per SSPC AB3, and mandatory use of new manufactured grit. Packaging specifications mandate steel drums that are poly-lined and sealed, with pallets poly-covered.
The document outlines comprehensive sampling and testing protocols, including a detailed sample size schedule based on lot size and rigorous hardness testing procedures. Critically, if any sample fails testing, the entire order will be rejected. Additional requirements include marking containers per MIL-STD-129 and adherence to specific SAE and ASTM standards for cast shot and grit sizing, with all referenced specifications required to be at their latest revision at time of award.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| CERTIFICATION OF COMPLIANCE CDRL.pdf | ||
| 25Q1630 STEEL GRIT.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
MATERIAL ORDERING DATA
SAE J1993
IDN: N4523A 5115-7904
ICN: 88-MSM-00001 KO: 000 KOI:
Any specification that is referenced in this Material Order Data sheet is required to be to the latest revision at time of award.
Ordering Data :
SAE J1993 HIGH-CARBON CAST-STEEL GRIT dated September 1996 (R 2019).
GRIT SIZING UNDER THIS SPECIFICATION SHALL CONFORM TO SAE J444
CAST SHOT AND GRIT SIZE SPECIFICATIONS FOR CLEANING AND PEENING
dated JUNE 2023.
A. Type, Class, and Grade required: G50 PER SAE J444.
B. Hardness: HCS G(1)L -- HARDNESS RANGE SHALL BE 54 TO 61 HRC
C. DURABILITY: PER SSPC AB3
D. PACKAGING AND PACKING REQUIREMENTS: STEEL DRUMS INSIDE AND
OUTSIDE ARE REQUIRED TO BE POLY-LINED AND SEALED. PALLETS
ARE REQUIRED TO BE POLY COVERED
E. NEW MANUFACTURED GRIT ONLY. RECYCLED GRIT NOT ACCEPTABLE.
F. QUANTITY: 100 DRUMS
Additional Data Requirements:
a. ASTM B215 METHOD B WILL NOT BE USED TO DRAW SAMPLES FOR
TESTING. KEYSTONE SAMPLERS AND SAMPLE SPLITTERS WILL NOT BE
USED. A REPRESENTATIVE SAMPLE WILL BE DRAWN FROM DRUMS
PER THE FOLLOWING SAMPLE SCHEDULE:
Lot Size Sample Size 2 to 15 drums 2 16 to 25 drums 3 26 to 90 drums 5 91 to 150 drums 8 151 to 280 drums 13 281 to 500 drums 20
MATERIAL ORDERING DATA
SAE J1993
501 to 1,200 drums 32 1201 to 3,200 drums 50 3201 to 10,000 drums 80
b. For hardness testing, ten particles will be tested from each sample per SAE
J1993 paragraph 10.4 and ASTM E 384. Three hardness readings will be taken on each particle. Ninety percent of the hardness readings for each sample shall be within the specified range.
c. The samples will be tested for conformance to other chemical and physical properties as defined in SAE J1993.
d. If one sample fails the entire order shall fail and all batches delivered as part of that order shall be rejected. Sampling and testing of each batch delivered shall not be required.
All unit, intermediate, and shipping containers must be marked in accordance with MIL- STD-129. Refer to DLA Procurement Note C20 for further instructions.
Prepared By: Susan Trezise
Code: 244.4
File details come from the government source that posted it. Updated .