MATERIAL ORDERING DATA.pdf
PDF 54 KB Posted
- Attached to
- STEEL GRIT Federal contract opportunity
- Solicitation number
- SPMYM224Q1976
About this file
This document is a Material Ordering Data sheet for SAE J1993 high-carbon cast-steel grit. It specifies the required type, class, grade, hardness, durability, packaging, and sampling/testing requirements for the grit. The grit must conform to SAE J444 for cast shot and grit size specifications. It requires new manufactured grit only, with no recycled grit allowed. The quantity is 100. Sampling and testing procedures are detailed, including requirements that 90% of hardness readings be within the specified range and that failure of any sample will result in rejection of the entire order. The material is being procured under a related federal contract opportunity, Solicitation Number SPMYM224Q1976 issued by the Defense Logistics Agency (DLA) Maritime Puget Sound Naval Shipyard/TRF Bangor for SOLE SOURCE STEEL GRIT. The procurement will be conducted under FAR Parts 12 and 13 for commercial items and simplified acquisition.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| EXHIBIT A- CDRL.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
MATERIAL ORDERING DATA
SAE J1993
IDN: N4523A 4183-7901
ICN: LL-N05-0404 KO: KOI:
Any specification that is referenced in this Material Order Data sheet is required to be to the latest revision at time of award.
Ordering Data :
SAE J1993 HIGH-CARBON CAST-STEEL GRIT dated September 1996 (R 2019).
GRIT SIZING UNDER THIS SPECIFICATION SHALL CONFORM TO SAE J444
CAST SHOT AND GRIT SIZE SPECIFICATIONS FOR CLEANING AND PEENING
dated JUNE 2023.
A. Type, Class, and Grade required: G50 PER SAE J444.
B. Hardness: HCS G(1)L -- HARDNESS RANGE SHALL BE 54 TO 61 HRC
C. DURABILITY: PER SSPC AB3
D. PACKAGING AND PACKING REQUIREMENTS: STEEL DRUMS INSIDE AND
OUTSIDE ARE REQUIRED TO BE POLY-LINED AND SEALED. PALLETS
ARE REQUIRED TO BE POLY COVERED
E. NEW MANUFACTURED GRIT ONLY. RECYCLED GRIT NOT ACCEPTABLE.
F. QUANTITY: 100
Additional Data Requirements:
a. ASTM B215 METHOD B WILL NOT BE USED TO DRAW SAMPLES FOR
TESTING. KEYSTONE SAMPLERS AND SAMPLE SPLITTERS WILL NOT BE
USED. A REPRESENTATIVE SAMPLE WILL BE DRAWN FROM DRUMS
PER THE FOLLOWING SAMPLE SCHEDULE:
Lot Size Sample Size 2 to 15 drums 2 16 to 25 drums 3 26 to 90 drums 5 91 to 150 drums 8 151 to 280 drums 13 281 to 500 drums 20
MATERIAL ORDERING DATA
SAE J1993
501 to 1,200 drums 32 1201 to 3,200 drums 50 3201 to 10,000 drums 80
b. For hardness testing, ten particles will be tested from each sample per SAE
J1993 paragraph 10.4 and ASTM E 384. Three hardness readings will be taken on each particle. Ninety percent of the hardness readings for each sample shall be within the specified range.
c. The samples will be tested for conformance to other chemical and physical properties as defined in SAE J1993.
d. If one sample fails the entire order shall fail and all batches delivered as part of that order shall be rejected. Sampling and testing of each batch delivered shall not be required.
All unit, intermediate, and shipping containers must be marked in accordance with MIL- STD-129. Refer to DLA Procurement Note C20 for further instructions.
Prepared By: Willie Leach
Code: C/244
File details come from the government source that posted it. Updated .