MATERIAL ORDERING DATA.pdf
PDF 118 KB Posted
- Attached to
- RUDDER STOCK Federal contract opportunity
- Solicitation number
- SPMYM224Q0178
About this file
This document provides ordering data for copper-nickel alloy castings to be procured under solicitation number SPMYM224Q0178 for rudder stock. The ordering data specifies machining dimensions for two castings of copper alloy UNS number C96400 to ASTM-B369 standard, with a length of 103 inches, outside diameter of 28.250 inches, and inside diameter of 26.300 inches. The document outlines roundness, concentricity, and straightness tolerances and requires centrifugal casting and machining. It specifies ASME code inapplicability and references supplementary requirements for soundness testing, pressure testing, welding, quality assurance, and product marking. Liquid penetrant and radiographic inspection requirements are defined along with certification of chemical and mechanical properties and weld procedure approval.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| 24Q0178 RUDDER STOCK.pdf | ||
| CDRLs combined.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
MATERIAL ORDERING DATA
ASTM-B-369
IDN: N4523A 3275-9400
ICN: 38RNO56201 KO: S01 KOI: 001
Paragraph 5 Ordering Data
A. ASTM-B-369/B369M, STANDARD SPECIFICATION FOR COPPER-NICKEL ALLOY
CASTINGS, dated 01 APRIL 2020.
B. Quantity of castings:2 C. Copper Alloy UNS number (Table 2): C96400
D. Pattern or drawing number: 119-6659793 Rev E, Pc 17. Drawing and piece number provided for shipyard information only. Dimensions provided below include excess material on castings.
Vendor shall rough machine casting to the following dimensions.
Outside Diameter: 28.250 INCHES +0.063 / -0.000 INCHES Inside Diameter: 26.300 INCHES +0.000 / -0.063 INCHES Length: 103 INCHES +0.250 / -0.000 INCHES Roundness: The roundness of the inside diameter of the sleeve shall be within 0.031".
Concentricity: The inside diameter of the sleeve shall be concentric to the outside diameter within 0.031 INCHES.
Straightness: The straightness of the sleeve measured along the length of the inside shall be within 0.031 INCHES.
NOTE: Centrifugal casting required.
Condition (as-cast, machined, and so forth): Machined
E. ASME Boiler and Pressure Vessel Code Requirements: No F. When material is purchased for agencies of the U.S. Government, the Supplementary
Requirements of this specification may be specified.
G. The following are optional and should be specified in the purchase order when required:
Pressure test or soundness requirements (Specification B 824) Witness inspection (Specification B824) Certification (Specification B824) Foundry test report (Specification B824) Product marking (Specification B824) Weldability test Approval of weld procedure and records of repairs
H. Supplementary Requirements:
S1 – Referenced documents S2 – Soundness S3 – Pressure test S4 – Weld repair S5 – Quality Assurance S6 – Product marking
I. Preparation for delivery:
S7.1 – Preservation, packaging, and packing is required: Level C The material shall be separated by size, composition, grade, or class and shall be preserved and packaged, Level A or C, packed, Level A, B, or C as specified in the contract or purchase order, in accordance with the requirements of Practice B900.
S7.2 – In addition to any special marking required by the contract or purchase order, marking for shipment shall be in accordance with MIL-STD-129.
Additional Data Requirements:
The following references ASTM-B-369 and are clarification/expansion of the designated section of Paragraph G Ordering Data requirements (Soundness)/H.S2/H.S3 - Soundness Requirements: Liquid Penetrant inspection (PT) shall be in accordance with T9074-AS-GIB-010/271 (Rev 1), acceptance criteria for PT shall be per MIL-STD-2035A class 1. Radiographic Inspection (RT) per T9074-AS-GIB-010/271 (Rev 1).
Acceptance criteria for RT shall be per TABLE XIX of S9074-AR-GIB-010/278 (Change A), Criticality Level 1, for a casting thickness of 1 inch and less. Penetrameter selection shall be as follows: Vendor shall use 0.87” penetrameter maximum with 2-2T sensitivity for the entire length of the sleeve. Radiographic shooting sketches, test report, and radiographic film shall be forwarded prior to hardware shipment. Government to verify format, content, and media.
Hardware will not be shipped until the government accepts the report and film.
(Certification) Certification of Compliance with chemical composition per Table 2 and mechanical properties per Table 3 is required.
(Product Marking) Product Marking: Markings shall be per Section S6, except drawing and piece number are not required, as the castings are not finished components.
(Weldability) Weldability Test: Weldability test shall be per ASTM B369 Section 8.
(Weld Approval) Approval of weld procedure and records of repair: Approval of weld repairs in excess of limits specified in ASTM B369 paragraph 9.1 is required and shall be per paragraph
9.2. All weld repairs shall be in accordance with S9074-AR-GIB-010/278 (Change A) using welders and welding procedures qualified in accordance with S9074-AQ-GIB-010/248.
Prepared By: Kevin Mann
Code: 260V
File details come from the government source that posted it. Updated .