Material Ordering Data.pdf
PDF 251 KB Posted
- Attached to
- Roll Out Shelving Federal contract opportunity
- Solicitation number
- SPMYM222Q2752
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPMYM222Q2752 Roll Out Shelving.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Salients for JML #: 2187-3805
Jarke EZ483672 Roll-Out Shelving or equivalent
The shelving unit shall not exceed the below dimensional parameters:
- Width: between 48” and 50”
- Depth: between 36” and 38”
- Height: between 72” and 24”
The shelving unit shall be constructed of steel.
The shelving unit shall be powder coated.
The shelving unit shall have 3 shelves.
The shelves shall be adjustable and on 2” centers.
The spacing between each shelf shall be between 17” and 18”.
Each shelf shall be 48” wide and 36” long or compatible with the dimensional parameters of the unit dimensions.
The load capacity per shelf shall be at minimum 2,000 lbs.
The shelves shall have roll-out capabilities.
The shelving unit shall be a starter unit that has options for add on features.
The preferred color is blue, but other colors may be acceptable.
The shelving unit paint finish shall be enamel.
The shelving unit shall include the following structural components:
- 2/each- upright frames
- 3/each- fully extendable roll out selves
- A fixed top shelf
Mounting hardware shall be included.
The entire shelving unit shall have a load capacity of 6,000lb minimum.
The unit make come assembled or disassembled.
File details come from the government source that posted it. Updated .