MATERIAL ORDERING DATA.pdf
PDF 190 KB Posted
- Attached to
- HEX HEAD STEEL BOLT Federal contract opportunity
- Solicitation number
- SPMYM222Q2585
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| amendment 2.pdf | ||
| amendment.pdf | ||
| SPMYM222Q2585.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
MATERIAL ORDERING DATA
MIL-S-24093
IDN: N4523A- 2170-5922
ICN: 47SAED652X KO: S53 KOI: 002
Paragraph 6.2 Ordering Data
A. MIL-S-24093A w/INT AMENDMENT 1, STEEL FORGINGS, CARBON AND ALLOY HEAT TREATED, dated 10 July 2012
B. Class required: B - 120,000 lb/in2 minimum yield strength
Type required: I - Ni Cr Mo
C. The current issue of DODISS and individual documents referenced is to be cited in the solicitation.
D. Special melting practices are required.
E. Continuous casting is not prohibited.
F. Virgin raw materials are required.
G Transverse mechanical properties are desired.
H. Impact testing is required.
I. Dimensions and tolerances required: 3"-4UNC-2A X 17-7/8" LG IAW DWG 243-
6220431 *EXCEPTION NOTED IN ADDITIONAL DATA REQUIRED*
J. Identification marking is required.
K. Marking other than indentation stamping is not required.
L. Ultrasonic examination is required.
M. Ultrasonic examination acceptance criteria if other than as specified: MIL-STD-271
N. Commercial preservation and packing is required. Marking to be per contract.
Additional Data Requirements: SHAFT PORTION OF BOLT TO BE FABRICATED
1/2 INCH WIDER DIAMETER FOR SIZE ADJUSTMENT AS NEEDED FOR
INSTALLATION. (3.945" VS 3.445 AND 3.835" VS 3.335")
Prepared by: WILLIAM T JOHNSON Code: 242
File details come from the government source that posted it. Updated .